显示段中块的情况，show_space（段空间自动和手动管理）

====================================================
--用于SSAM表空间中的object
--This procedure shows the space usage of data blocks under the segment High Water Mark.
===================================================

create or replace procedure show_space
(p_segment_owner in varchar2,
 p_segment_name in varchar2,
 p_segment_type in varchar2
 )
as

l_unformatted_blocks number;
l_unformatted_bytes number;
l_fs1_blocks number;
l_fs1_bytes number;
l_fs2_blocks number;
l_fs2_bytes number;
l_fs3_blocks number;
l_fs3_bytes number;
l_fs4_blocks number;
l_fs4_bytes number;
l_full_blocks number;
l_full_bytes number;

procedure p( p_label in varchar2, p_num in number )
is
begin
dbms_output.put_line( rpad(p_label,40,'.') ||
p_num );
end;

begin
dbms_space.space_usage(segment_owner => p_segment_owner ,
segment_name => p_segment_name ,
segment_type => p_segment_type ,
unformatted_blocks => l_unformatted_blocks ,
unformatted_bytes => l_unformatted_bytes,
fs1_blocks => l_fs1_blocks,
fs1_bytes => l_fs1_bytes ,
fs2_blocks => l_fs2_blocks,
fs2_bytes => l_fs2_bytes,
fs3_blocks => l_fs3_blocks ,
fs3_bytes => l_fs3_bytes,
fs4_blocks => l_fs4_blocks,
fs4_bytes => l_fs4_bytes,
full_blocks => l_full_blocks,
full_bytes => l_full_bytes);
dbms_output.put_line(rpad(' ',50,'*'));
dbms_output.put_line('Pls check weather the segment has been analyzed');
p( '0% -- 25% free space blocks', l_fs1_blocks);
p( '0% -- 25% free space bytes', l_fs1_bytes);
p( '25% -- 50% free space blocks', l_fs2_blocks);
p( '25% -- 50% free space bytes', l_fs2_bytes);
p( '50% -- 75% free space blocks', l_fs3_blocks);
p( '50% -- 75% free space bytes', l_fs3_bytes);
p( '75% -- 100% free space blocks', l_fs4_blocks);
p( '75% -- 100% free space bytes', l_fs4_bytes);
p( 'Unformatted Blocks', l_unformatted_blocks );
p( 'Unformatted Bytes', l_unformatted_bytes );
p( 'Full Blocks', l_full_blocks);
p( 'Full blocks bytes', l_full_bytes);
end;
/

 

--- 只适用于非ASSM:

create or replace
procedure show_space
( p_segname in varchar2,
p_owner in varchar2 default user,
p_type in varchar2 default 'TABLE' )
as
l_free_blks number;
l_total_blocks number;
l_total_bytes number;
l_unused_blocks number;
l_unused_bytes number;
l_LastUsedExtFileId number;
l_LastUsedExtBlockId number;
l_LAST_USED_BLOCK number;
procedure p( p_label in varchar2, p_num in number )
is
begin
dbms_output.put_line( rpad(p_label,40,'.') ||
p_num );
end;
begin
dbms_space.free_blocks
( segment_owner => p_owner,
segment_name => p_segname,
segment_type => p_type,
freelist_group_id => 0,
free_blks => l_free_blks );
dbms_space.unused_space
( segment_owner => p_owner,
segment_name => p_segname,
segment_type => p_type,
total_blocks => l_total_blocks,
total_bytes => l_total_bytes,
unused_blocks => l_unused_blocks,
unused_bytes => l_unused_bytes,
LAST_USED_EXTENT_FILE_ID => l_LastUsedExtFileId,
LAST_USED_EXTENT_BLOCK_ID => l_LastUsedExtBlockId,
LAST_USED_BLOCK => l_LAST_USED_BLOCK );

p( 'Free Blocks', l_free_blks );
p( 'Total Blocks', l_total_blocks );
p( 'Total Bytes', l_total_bytes );
p( 'Unused Blocks', l_unused_blocks );
p( 'Unused Bytes', l_unused_bytes );
p( 'Last Used Ext FileId', l_LastUsedExtFileId );
p( 'Last Used Ext BlockId', l_LastUsedExtBlockId );
p( 'Last Used Block', l_LAST_USED_BLOCK );
end;
/