分类： LINUX
2009-12-21 11:23:34
Modern Linux distributions are capable of identifying a hardware component which is plugged into an already-running system. There are a lot of user-friendly distributions like Ubuntu, which will automatically run specific applications like Rhythmbox when a portable device like an iPod is plugged into the system.
Hotplugging (which is the word used to describe the process of inserting devices into a running system) is achieved in a Linux distribution by a combination of three components: Udev, HAL, and Dbus.
Udev supplies a dynamic device directory containing only the nodes for devices which are connected to the system. It creates or removes the device node files in the /dev directory as they are plugged in or taken out. Dbus is like a system bus which is used for inter-process communication. The HAL gets information from the Udev service, when a device is attached to the system and it creates an XML representation of that device. It then notifies the corresponding desktop application like Nautilus through the Dbus and Nautilus will open the mounted device’s files.
This article focuses only on Udev, which does the basic device identification.
Udev is the device manager for the Linux 2.6 kernel that creates/removes device nodes in the /dev directory dynamically. It is the successor of devfs and hotplug. It runs in userspace and the user can change device names using Udev rules.
Udev depends on the sysfs file system which was introduced in the 2.5 kernel. It is sysfs which makes devices visible in user space. When a device is added or removed, kernel events are produced which will notify Udev in user space.
The external binary /sbin/hotplug was used in earlier releases to inform Udev about device state change. That has been replaced and Udev can now directly listen to those events through Netlink.
In the older kernels, the /dev directory contained statics device files. But with dynamic device creation, device nodes for only those devices which are actually present in the system are created. Let us see the disadvantages of the static /dev directory, which led to the development of Udev.
The kernel will assign a major/minor number pair when it detects a hardware device while booting the system. Let us consider two hard disks. The connection/alignment is in such a way that one is connected as a master and the other, as a slave. The Linux system will call them, /dev/hdaand /dev/hdb. Now, if we interchange the disks the device name will change. This makes it difficult to identify the correct device that is related to the available static device node. The condition gets worse when there are a bunch of hard disks connected to the system.
Udev provides a persistent device naming system through the /dev directory, making it easier to identify the device.
The following is an example of persistent symbolic links created by Udev for the hard disks attached to a system.
$ ls -lR /dev/disk/
/dev/disk/by-id:
lrwxrwxrwx 1 root root 9 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jul 4 06:48 scsi-SATA_WDC_WD800JD-75M_WD-WMAM9UT48593-part7 -> ../../sda7
/dev/disk/by-label:
lrwxrwxrwx 1 root root 10 Jul 4 06:48 1 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jul 4 06:48 boot1 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 4 06:48 project -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 4 06:48 SWAP-sda7 -> ../../sda7
/dev/disk/by-path:
lrwxrwxrwx 1 root root 9 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jul 4 06:48 pci-0000:00:1f.2-scsi-0:0:0:0-part7 -> ../../sda7
/dev/disk/by-uuid:
lrwxrwxrwx 1 root root 10 Jul 4 06:48 18283DC6283DA422 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 4 06:48 25a4068c-e84a-44ac-85e6-461b064d08cd -> ../../sda6
lrwxrwxrwx 1 root root 10 Jul 4 06:48 3ea7cf15-511b-407a-a56b-c6bfa046fd9f -> ../../sda5
lrwxrwxrwx 1 root root 10 Jul 4 06:48 8878a0a4-604e-4ddf-b62c-637c4fa84d3f -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 4 06:48 e50bcd6d-61ea-4b05-81a8-3cbe17ad6674 -> ../../sda3
Persistent device naming helps to identify the hardware device without much trouble.
In the static model of device node creation, no method was available to identify the hardware devices actually present in the system. So, device nodes were created for all the devices that Linux was known to support at the time. The huge mess of device nodes in /dev made it difficult to identify the devices actually present in the system.
The number of static device nodes to be included increased a lot in recent times and the 8-bit scheme, that was used, proved to be insufficient for handling all the devices. As a result the major/minor number pairs started running out.
Character devices and block devices have a fixed major/minor number pair assigned to them. The authority responsible for assigning the major/minor pair is the Linux Assigned Name and Number Authority. But, a machine will not use all the available devices. So, there will be free major/minor numbers within a system. In such a situation, the kernel of that machine will borrow major/minor numbers from those free devices and assign those numbers to other devices which require it.
This can create issues at times. The user space application which handles the device through the device node will not be aware of the number change. For the user space application, the device number assigned by LANANA is very important. So, the user space application should be informed about the major/minor number change. This is called dynamic assignment of major/minor numbers and Udev does this task.
Udev is the default device manager in the 2.6 kernel. Almost all modern Linux distributions come with Udev as part of the default installation. You can also get Udev from . The latest version of Udev needs the 2.6.25 kernel with sysfs, procfs, signalfd, inotify, Unix domain sockets, networking, and hotplug enabled.
CONFIG_HOTPLUG=y
CONFIG_UEVENT_HELPER_PATH=”"
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_SYSFS=y
CONFIG_SYSFS_DEPRECATED*=n
CONFIG_PROC_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_SIGNALFD=y
For a much more reliable operation, the kernel must not use the CONFIG_SYSFS_DEPRECATED* option.
Udev depends on the proc and sys file systems and they must be mounted on /proc and /sys.
The Udev daemon listens to the netlink socket that the kernel uses for communicating with user space applications. The kernel will send a bunch of data through the netlink socket when a device is added to, or removed from a system. The Udev daemon catches all this data and will do the rest, i.e., device node creation, module loading etc.
Let us examine an example of device driver loading in Linux :
I am using a C program to collect data from the netlink socket that Udev uses to create device nodes and load modules.
[root@arch ~]# ./a.out
add@/devices/pci0000:00/0000:00:02.1/usb1/1-4
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:02.1/usb1/1-4
SUBSYSTEM=usb
MAJOR=189
MINOR=1
DEVTYPE=usb_device
DEVICE=/proc/bus/usb/001/002
PRODUCT=1058/1010/105
TYPE=0/0/0
BUSNUM=001
DEVNUM=002
SEQNUM=1163
add@/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0
SUBSYSTEM=usb
DEVTYPE=usb_interface
DEVICE=/proc/bus/usb/001/002
PRODUCT=1058/1010/105 …………………………………………
You can see that it provides a lot of information about the device. This includes the modalias variable that tells Udev to load a particular module.
The modalias data will look like :
MODALIAS=pci:v000010ECd00008169sv00001385sd0000311Abc02sc00i00
The modalias data contains all the information required to find the corresponding device driver :
pci :- Its a pci device
v :- vendor ID of the device. Here it is 000010EC ( ie 10EC )
d :- device ID of the device. Here it is 00008169 ( ie : 8169 )
sv and sd are subsystem versions for both vendor and device.
The best place to find the vendor/product from the id of a PCI device is
Udev uses the modalias data to find the correct device driver from /lib/modules/`uname -r`/modules.alias.
$ grep -i 10EC /lib/modules/`uname -r`/modules.alias | grep -i 8169
alias pci:v000010ECd00008129sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008169sv*sd*bc*sc*i* r8169
You can see that the module which is suitable for the device is r8169. Let us get some more information about the driver.
$ /sbin/modinfo r8169
filename: /lib/modules/2.6.18-53.el5/kernel/drivers/net/r8169.ko
version: 2.2LK-NAPI
license: GPL
description: RealTek RTL-8169 Gigabit Ethernet driver
author: Realtek and the Linux r8169 crew
srcversion: D5EDA4980B92CA2CF677B62
alias: pci:v00001737d00001032sv*sd00000024bc*sc*i*
alias: pci:v000016ECd00000116sv*sd*bc*sc*i*
alias: pci:v00001186d00004300sv*sd*bc*sc*i*
alias: pci:v000010ECd00008129sv*sd*bc*sc*i*
alias: pci:v000010ECd00008169sv*sd*bc*sc*i*
depends:
vermagic: 2.6.18-53.el5 SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1
parm: media:force phy operation. Deprecated by ethtool (8). (array of int)
parm: rx_copybreak:Copy breakpoint for copy-only-tiny-frames (int)
parm: use_dac:Enable PCI DAC. Unsafe on 32 bit PCI slot. (int)
parm: debug:Debug verbosity level (0=none, …, 16=all) (int)
Check out the line starting with “depends”. It describes the other modules which the r8169 module depends on. Udev will load these modules also.
As already mentioned, Udev parses the rules in/etc/udev/rules.d/ for every device state change in the kernel. The Udev rule can be used to manipulate the device node name/permission/symlink in user space.
Let us see some sample rules that will help you understand Udev rules better.
The data supplied by the kernel through netlink is used by Udev to create the device nodes. The data includes the major/minor number pair and other device specific data such as device/vendor id, device serial number etc. The Udev rule can match all this data to change the name of the device node, create symbolic links or register the network link.
The following example shows how to write a Udev rule to rename the network device in a system.
We need to get the device information to create a rule.
# udevadm info -a -p /sys/class/net/eth0/llooking at device '/devices/pci0000:00/0000:00:04.0/0000:01:06.0/net/eth0':
KERNEL==”eth0″
SUBSYSTEM==”net”
DRIVER==”"
ATTR{addr_len}==”6″
ATTR{dev_id}==”0×0″
ATTR{ifalias}==”"
ATTR{iflink}==”3″
ATTR{ifindex}==”3″
ATTR{features}==”0×829″
ATTR{type}==”1″
ATTR{link_mode}==”0″
ATTR{address}==”00:80:48:62:2a:33″
ATTR{broadcast}==”ff:ff:ff:ff:ff:ff”
ATTR{carrier}==”1″
ATTR{dormant}==”0″
ATTR{operstate}==”unknown”
ATTR{mtu}==”1500″
ATTR{flags}==”0×1003″
ATTR{tx_queue_len}==”1000″
looking at parent device ‘/devices/pci0000:00/0000:00:04.0/0000:01:06.0′:
KERNELS==”0000:01:06.0″
SUBSYSTEMS==”pci”
DRIVERS==”8139too”
ATTRS{vendor}==”0×10ec”
ATTRS{device}==”0×8139″
ATTRS{subsystem_vendor}==”0×10ec”
ATTRS{subsystem_device}==”0×8139″
ATTRS{class}==”0×020000″
ATTRS{irq}==”19″
ATTRS{local_cpus}==”ff”
ATTRS{local_cpulist}==”0-7″
ATTRS{modalias}==”pci:v000010ECd00008139sv000010ECsd00008139bc02sc00i00″
ATTRS{enable}==”1″
ATTRS{broken_parity_status}==”0″
ATTRS{msi_bus}==”"
looking at parent device ‘/devices/pci0000:00/0000:00:04.0′:
KERNELS==”0000:00:04.0″
SUBSYSTEMS==”pci”
DRIVERS==”"
ATTRS{vendor}==”0×10de”
ATTRS{device}==”0×03f3″
ATTRS{subsystem_vendor}==”0×0000″
ATTRS{subsystem_device}==”0×0000″
ATTRS{class}==”0×060401″
ATTRS{irq}==”0″
ATTRS{local_cpus}==”ff”
ATTRS{local_cpulist}==”0-7″
ATTRS{modalias}==”pci:v000010DEd000003F3sv00000000sd00000000bc06sc04i01″
ATTRS{enable}==”1″
ATTRS{broken_parity_status}==”0″
ATTRS{msi_bus}==”1″
looking at parent device ‘/devices/pci0000:00′:
KERNELS==”pci0000:00″
SUBSYSTEMS==”"
DRIVERS==”"
You can see that Udev has a lot of information about the network device. Let us examine it in detail :
KERNEL=="eth0" :- kernel name of the device is eth0
DRIVERS==”8139too” :- driver loaded is 8139too
ATTR{address}==”00:80:48:62:2a:33″ :- hardware address of the device
ATTRS{vendor}==”0×10ec” :- vendor id
ATTRS{device}==”0×8139″ :- device id
Let us create a rule to rename this network device to eth1 (This name will be persistent and will not be reset after a reboot).
>[root@arch ~]# cat /etc/udev/rules.d/70-persistent-net.rules
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:80:48:62:2a:33″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1″
This rule renames the device to eth1. We can easily manage the network and other device nodes in the system, this way.
Udev provides some user space utilities to manage devices and device nodes in a system. One such command that you will find in all of the latest Linux distributions is ‘udevadm’. The udevadm command is functionally capable of doing all the tasks which were done by the separate commands shown above.
This utility can be used to regenerate the device nodes in a running system as shown:
[root@arch ~]# ls -l /dev/ | wc -l
150
[root@arch ~]# rm -rf /dev/*
rm: cannot remove `/dev/pts/0′: Operation not permitted
rm: cannot remove directory `/dev/shm’: Device or resource busy
[root@arch ~]# ls -l /dev/ | wc -l
4
[root@arch ~]# udevadm trigger
[root@arch ~]# ls -l /dev/ | wc -l
150
There are many other useful operations that can be done using the udevadm command. You can get more information from the man page of udevadm.
It is impossible to predict the future of a Linux sub system. Linux is undergoing rapid development and it is probably not wise to predict the future of the Linux kernel. The DEVfs system which was introduced as a solution to static device nodes disappeared within a short span of time. But Udev has proven to be a successful device manager for the modern Linux kernel, and promises to be a more stable, feature rich device management system in future releases.
Unnikrishnan A, is an expert in Linux Server Administration. Linux fascinates him as it is a platform for major opensource initiatives and gives any one, the ability to learn it deeply. He also admires the fact that Linux has a large community driven support which enables greater scope for emergence of ideas and solutions. Apart from Linux, Unnikrishnan also loves Electronics and Astronomy. During his free time, Unnikrishnan loves to explore the world of web designing. This article originally appeared at Bobcares.
