[root@/etc]# lsmod
Module Size Used by Not tainted
tg3 53128 1
eepro100 23348 1
mii 4124 0 [eepro100]
st 31888 0 (unused)
ext3 73408 1
jbd 56368 1 [ext3]
qla2300 238912 0 (unused)
ips 45088 2
aic7xxx 142324 0 (unused)
sd_mod 13484 4
scsi_mod 110616 5 [st qla2300 ips aic7xxx sd_mod]
[root@/etc]# lspci
00:00.0 Host bridge: Relience Computer: Unknown device 0011 (rev 22)
00:00.1 Host bridge: Relience Computer: Unknown device 0011
00:00.2 Host bridge: Relience Computer: Unknown device 0011
00:00.3 Host bridge: Relience Computer: Unknown device 0011
00:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 0c)
00:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Relience Computer: Unknown device 0201 (rev 93)
00:0f.1 IDE interface: Relience Computer: Unknown device 0212 (rev 93)
00:0f.2 USB Controller: Relience Computer: Unknown device 0220 (rev 05)
00:0f.3 ISA bridge: Relience Computer: Unknown device 0225
00:10.0 Host bridge: Relience Computer: Unknown device 0010 (rev 03)
00:10.2 Host bridge: Relience Computer: Unknown device 0010 (rev 03)
00:11.0 Host bridge: Relience Computer: Unknown device 0010 (rev 03)
00:11.2 Host bridge: Relience Computer: Unknown device 0010 (rev 03)
01:04.0 Fiber Channel: Q Logic: Unknown device 2312 (rev 02)
08:0a.0 SCSI storage controller: Adaptec 7899P (rev 01)
08:0a.1 SCSI storage controller: Adaptec 7899P (rev 01)
09:02.0 RAID bus controller: IBM: Unknown device 01bd
09:08.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7 (rev 02)
You have new mail in /var/spool/mail/root
[root/etc]# more /etc/fstab
/dev/sda3 / ext3 defaults 1 1
#/dev/sda2 /archive ext3 defaults 1 2
#/dev/sdb1 /app_log ext3 noauto,owner 0 1
/dev/sdc1 /app_log ext3 noauto,owner 0 0
/dev/sda1 swap swap defaults 0 0
none /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,owner,kudzu,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0
[root@/etc]# dmesg
512K
CPU: L3 cache: 1024K
CPU: Physical Processor ID: 2
Intel machine check reporting enabled on CPU#4.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU4: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
Booting processor 5/5 eip 2000
Initializing CPU#5
masked ExtINT on CPU#5
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2975.33 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: L3 cache: 1024K
CPU: Physical Processor ID: 2
Intel machine check reporting enabled on CPU#5.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU5: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
Booting processor 6/6 eip 2000
Initializing CPU#6
masked ExtINT on CPU#6
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2981.88 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: L3 cache: 1024K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#6.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU6: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
Booting processor 7/7 eip 2000
Initializing CPU#7
masked ExtINT on CPU#7
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2975.33 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: L3 cache: 1024K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#7.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU7: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
Total of 8 processors activated (23809.22 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
cpu_sibling_map[2] = 3
cpu_sibling_map[3] = 2
cpu_sibling_map[4] = 5
cpu_sibling_map[5] = 4
cpu_sibling_map[6] = 7
cpu_sibling_map[7] = 6
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
Setting 12 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 12 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-0, 14-4, 14-5, 14-7, 14-9, 14-10, 14-11, 13-1, 13-2, 13-3 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 38.
number of IO-APIC #14 registers: 16.
number of IO-APIC #13 registers: 16.
number of IO-APIC #12 registers: 16.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0E000000
....... : arbitration: 0E
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 0FF 0F 1 1 0 1 0 1 1 41
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 0FF 0F 0 0 0 0 0 1 1 49
07 000 00 1 0 0 0 0 0 0 00
08 0FF 0F 0 0 0 0 0 1 1 51
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 0FF 0F 0 0 0 0 0 1 1 59
0d 0FF 0F 0 0 0 0 0 1 1 61
0e 0FF 0F 0 0 0 0 0 1 1 69
0f 0FF 0F 0 0 0 0 0 1 1 71
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0D000000
....... : arbitration: 0D
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 0FF 0F 1 1 0 1 0 1 1 79
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 0FF 0F 1 1 0 1 0 1 1 81
05 0FF 0F 1 1 0 1 0 1 1 89
06 0FF 0F 1 1 0 1 0 1 1 91
07 0FF 0F 1 1 0 1 0 1 1 99
08 0FF 0F 1 1 0 1 0 1 1 A1
09 0FF 0F 1 1 0 1 0 1 1 A9
0a 0FF 0F 1 1 0 1 0 1 1 B1
0b 0FF 0F 1 1 0 1 0 1 1 B9
0c 0FF 0F 1 1 0 1 0 1 1 C1
0d 0FF 0F 1 1 0 1 0 1 1 C9
0e 0FF 0F 1 1 0 1 0 1 1 D1
0f 0FF 0F 1 1 0 1 0 1 1 D9
IO APIC #12......
.... register #00: 0C000000
....... : physical APIC id: 0C
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0C000000
....... : arbitration: 0C
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 0FF 0F 1 1 0 1 0 1 1 E1
01 0FF 0F 1 1 0 1 0 1 1 E9
02 0FF 0F 1 1 0 1 0 1 1 32
03 0FF 0F 1 1 0 1 0 1 1 3A
04 0FF 0F 1 1 0 1 0 1 1 42
05 0FF 0F 1 1 0 1 0 1 1 4A
06 0FF 0F 1 1 0 1 0 1 1 52
07 0FF 0F 1 1 0 1 0 1 1 5A
08 0FF 0F 1 1 0 1 0 1 1 62
09 0FF 0F 1 1 0 1 0 1 1 6A
0a 0FF 0F 1 1 0 1 0 1 1 72
0b 0FF 0F 1 1 0 1 0 1 1 7A
0c 0FF 0F 1 1 0 1 0 1 1 82
0d 0FF 0F 1 1 0 1 0 1 1 8A
0e 0FF 0F 1 1 0 1 0 1 1 92
0f 0FF 0F 1 1 0 1 0 1 1 9A
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ20 -> 1:4
IRQ21 -> 1:5
IRQ22 -> 1:6
IRQ23 -> 1:7
IRQ24 -> 1:8
IRQ25 -> 1:9
IRQ26 -> 1:10
IRQ27 -> 1:11
IRQ28 -> 1:12
IRQ29 -> 1:13
IRQ30 -> 1:14
IRQ31 -> 1:15
IRQ32 -> 2:0
IRQ33 -> 2:1
IRQ34 -> 2:2
IRQ35 -> 2:3
IRQ36 -> 2:4
IRQ37 -> 2:5
IRQ38 -> 2:6
IRQ39 -> 2:7
IRQ40 -> 2:8
IRQ41 -> 2:9
IRQ42 -> 2:10
IRQ43 -> 2:11
IRQ44 -> 2:12
IRQ45 -> 2:13
IRQ46 -> 2:14
IRQ47 -> 2:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1490.8443 MHz.
..... host bus clock speed is 99.3892 MHz.
cpu: 0, clocks: 993892, slice: 110432
CPU0
cpu: 4, clocks: 993892, slice: 110432
cpu: 7, clocks: 993892, slice: 110432
cpu: 1, clocks: 993892, slice: 110432
cpu: 3, clocks: 993892, slice: 110432
cpu: 6, clocks: 993892, slice: 110432
cpu: 5, clocks: 993892, slice: 110432
cpu: 2, clocks: 993892, slice: 110432
CPU1
CPU3
CPU5
CPU6
CPU7
CPU2
CPU4
checking TSC synchronization across CPUs:
BIOS BUG: CPU#1 improperly initialized, has 2 usecs TSC skew! FIXED.
Starting migration thread for cpu 0
smp_num_cpus: 8.
Starting migration thread for cpu 1
Starting migration thread for cpu 2
Starting migration thread for cpu 3
Starting migration thread for cpu 4
Starting migration thread for cpu 5
Starting migration thread for cpu 6
Starting migration thread for cpu 7
PCI: PCI BIOS revision 2.10 entry at 0xfd74c, last bus=12
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
PCI: Discovered peer bus 01
PCI: Discovered peer bus 08
PCI: Discovered peer bus 09
PCI->APIC IRQ transform: (B0,I7,P0) -> 16
PCI->APIC IRQ transform: (B0,I9,P0) -> 46
PCI->APIC IRQ transform: (B0,I15,P0) -> 3
PCI->APIC IRQ transform: (B1,I4,P0) -> 32
PCI->APIC IRQ transform: (B8,I10,P0) -> 44
PCI->APIC IRQ transform: (B8,I10,P1) -> 45
PCI->APIC IRQ transform: (B9,I2,P0) -> 24
PCI->APIC IRQ transform: (B9,I8,P0) -> 47
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA
hda: HL-DT-ST CD-ROM GCR-8480B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 380k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
blk: queue f75bca18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: DAT 9SP40-000 Rev: 9070
Type: Sequential-Access ANSI SCSI revision: 03
blk: queue f75bc818, I/O limit 4095Mb (mask 0xffffffff)
(scsi1:A:6): 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
scsi2 : IBM PCI ServeRAID 5.10.21
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: IBM Model: 02R0980a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sda: 71096320 512-byte hdwr sectors (36401 MB)
Partition check:
sda: sda1 sda2 sda3
qla2x00_set_info starts at address = f8866060
qla2x00: Found VID=1077 DID=2312 SSVID=1077 SSDID=100
scsi3: Found a QLA2312 @ bus 1, device 0x4, irq 32, iobase 0x2400
scsi(3): Allocated 4096 SRB(s)
scsi(3): Configure NVRAM parameters...
scsi(3): 64 Bit PCI Addressing Enabled
scsi(3): Verifying loaded RISC code...
scsi(3): Verifying chip...
scsi(3): LIP reset occurred
scsi(3): Waiting for LIP to complete...
scsi(3): LOOP UP detected
scsi3: Topology - (F_Port), Host Loop address 0xffff
scsi3: Topology - (F_Port), Host Loop address 0xffff
scsi3 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 1 device 4 irq 32
Firmware version: 3.01.13, Driver version 6.01.00-fo
Vendor: IBM Model: 3542 Rev: 0520
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: 1722-600 Rev: 0520
Type: Direct-Access ANSI SCSI revision: 03
scsi(3:0:0:0): Enabled tagged queuing, queue depth 16.
scsi(3:0:2:0): Enabled tagged queuing, queue depth 16.
Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
Attached scsi disk sdc at scsi3, channel 0, id 2, lun 0
SCSI device sdb: 20971520 512-byte hdwr sectors (10737 MB)
sdb: sdb1
SCSI device sdc: 20971520 512-byte hdwr sectors (10737 MB)
sdc: sdc1
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 156k freed
scsi(3): Waiting for LIP to complete...
scsi3: Topology - (F_Port), Host Loop address 0xffff
scsi3: Topology - (F_Port), Host Loop address 0xffff
Adding Swap: 1024088k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
st: Version 20020805, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi1, channel 0, id 6, lun 0
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport 0x278 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x278 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x278: You gave this address, but there is probably no parallel port there!
parport1: PC-style at 0x278 [PCSPP,TRISTATE]
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others
divert: allocating divert_blk for eth0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:07:E9:11:61:C2, IRQ 16.
Board assembly a29355-004, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x3258698e).
tg3.c:v1.4c (Feb 18, 2003)
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(BCM95703) rev 1002 PHY(5703)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:02:55:df:6a:bc
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
send_arp uses obsolete (PF_INET,SOCK_PACKET)
application bug: bkdaemon(2543) has SIGCHLD set to SIG_IGN but calls wait().
(see the NOTES section of 'man 2 wait'). Workaround activated.
application bug: crond(2651) has SIGCHLD set to SIG_IGN but calls wait().
(see the NOTES section of 'man 2 wait'). Workaround activated.
