更改博创2410s开发板的默认IP地址方式

在终端下首先要用minicom连接开发板，然后可见如下内容，ls列目录：
[/mnt/yaffs]ls                                                                 
485          da           ide          lost+found   serial_8250  web           
Qtopia       exp          init.sh      motor        sound        wireless      
ad           fpga         irda         mplayer      touchscreen                
bluetooth    gps_gprs     kbd_gpm      pcmcia-mod   ucos                       
can          iccard       lib          sdcard       video    

红色的这个就是我们要修改的文件：init.sh
然后，我们使用vi工具对其进行修改：如下（如何使用vi？）
[/mnt/yaffs]vi init.sh

#!/bin/sh
ifconfig eth0 192.168.1.100
#ifconfig eth1 192.168.1.117
route add default gw 192.168.1.1 netmask 255.255.255.0
inetd

#if [ -f /mnt/yaffs/iccard/i2c-tops2.o ]; then
#insmod /mnt/yaffs/iccard/i2c-tops2.o
#fi

ln -s /dev/tts/2 /dev/ttyS2

#test pcmcia and sd card
#cd /mnt/yaffs/sdcard; ./inssd.sh
#cd /mnt/yaffs/pcmcia-mod; ./inspcm.sh
#/mnt/yaffs/pcmcia-mod/cardmgr
insmod ./iccard/i2c-tomega8.o

#version 2410s 1.6

其中，我标识出来的三处红色字依次为：eth0设备的IP地址、网关及子网掩码。
编辑好后“:x”保存并退出，重启开发板后，ifconfig，可见如下：

[/mnt/yaffs]ifconfig                                                           
eth0      Link encap:Ethernet  HWaddr 00:D0:CF:00:00:02                        
          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0     
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1                   
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0                   
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                 
          collisions:0 txqueuelen:100                                          
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)                               
          Interrupt:2 Base address:0x200                                       
                                                                               
lo        Link encap:Local Loopback                                            
          inet addr:127.0.0.1  Mask:255.0.0.0                                  
          UP LOOPBACK RUNNING  MTU:16436  Metric:1                             
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0                   
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                 
          collisions:0 txqueuelen:0                                            
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B) 

可见，更改成功！希望本文能够帮助你。