Copy linux kernel from 0x00020000 to 0x30008000, size = 0x000c0000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/3 init=/linuxrc console=tty0 console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux....................................................... done, booting the kernel.
Linux version 2.4.18-rmk7-pxa1 (root@localhost.localdomain) (gcc version 2.95.2 20000516 (release) [Rebel.com]) #12 Sat Nov 3 20:09:03 CST 2007
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Embest EduKit II (S3C2410x)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/mtdblock/3 init=/linuxrc console=tty0 console=ttyS0
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62604KB available (1474K code, 311K data, 76K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz
Initializing S3C2410 buffer pool for DMA workaround
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
Console: switching to colour frame buffer device 40x30
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
s3c2410-ts initialized
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per queue, batch=32
eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300
cs89x0 media RJ-45, IRQ 37
loop: loaded (max 8 devices)
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
s3c2410 flash device: 4000KB at 0
Search for id:(01 2249) interleave(1) type(2)
Found: AMD AM29LV160DB
s3c2410 flash device: Found 1 x16 devices at 0x0 in 16-bit mode
number of JEDEC chips: 1
Creating 4 MTD partitions on "s3c2410 flash device":
0x00000000-0x00010000 : "reserved for bootloader"
0x00010000-0x00020000 : "reserved for param"
0x00020000-0x000e0000 : "reserved for kernel"
0x000e0000-0x00200000 : "cramfs"
No NAND device found!!!
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver ov511
ov511.c: v1.48a for Linux 2.4 : OV511 USB Camera Driver
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 76K
mount /etc as ramfs
re-create the /etc/mtab entries
init started: BusyBox v1.00 (2005.06.09-02:02+0000) multi-call binary
Starting pid 18, console /dev/console: '/etc/init.d/rcS'
Embest Embedded Linux Development Paltform.
Default board ip: 192.192.192.190
To change the ip addr: ifconfig eth0 new_board_ip
Start the web server: http://(board_ip)/index.htm
To connect the NFS server, please type like:
mkdir /etc/var/nfs
mount -t nfs nfs_server_ip:/home/app /etc/var/nfs -o nolock
To use the USB disc(insert first), please type like:
mount /dev/sda /mnt/udisk _OR_ mount /dev/sda1 /mnt/udisk
Please press Enter to activate this console.
阅读(600) | 评论(0) | 转发(0) |
