转-配置openldap使用SSL连接

转-配置openldap使用SSL连接

转-配置openldap使用SSL连接

写的很不错,转一下,

假设openldap服务器已经配置好，可以正常工作。下面的步骤只是让openldap使用ssl连接。
这篇文档参考了，那里有更详尽的介绍。
注：此配置在fc5下面通过。rhe系列会有不一样的地方。

0 在开始之前，
0.1 建议备份/etc/openldap/slapd.conf, /etc/openldap/ldap.conf
0.2 安装软件包openssl, openssl-perl.后者是用来创建CA认证的一个perl脚本包。

1 创建证书(certificate)
这一步分为3个步骤，首先把CA建立起来，然后让此CA签发一个server的证书和一个client的证书。
需要特别注意的是创建证书时，输入Common Name的时候一定要输入目标机器的fully qualified name

1.1 创建CA
这里关系到两个目录，/etc/pki/tls/misc是工作目录,/etc/pki/CA是存放所有CA相关文件的目录。
完成此步骤后，会在/etc/pki/CA目录下生成一系列文件，其中最重要的是
/etc/pki/CA/cakey.pem CA的私钥文件
/etc/pki/CA/cacert.pem CA的证书文件

tips：如果脚本检测到/etc/pki/CA下面有文件存在，那么script会安静的退出，不会创建任何东西。
把/etc/pki/CA下的文件全部删除，script就可以正常工作了

> cd /etc/pki/tls/misc
> ./CA.pl -newca

..........忽略部分信息........
writing new private key to '../../CA/private/cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [GB]:
State or Province Name (full name) [Berkshire]:
Locality Name (eg, city) [Newbury]:
Organization Name (eg, company) [My Company Ltd]:
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []: !!!!full qualified name!!!
Email Address []: <>

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
Using configuration from /etc/pki/tls/openssl.cnf
Enter pass phrase for ../../CA/private/cakey.pem:
Check that the request matches the signature
Signature ok
..........忽略部分信息........

1.2 创建server的证书
下面我们要创建ldap server的证书。分为两步，第一步是生成一个创建证书的请求，第二步是让CA为此请求签发证书

> ./CA.pl -newreq-nodes
Generating a 1024 bit RSA private key
............++++++
.......++++++
writing new private key to 'newkey.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [GB]:
State or Province Name (full name) [Berkshire]:
Locality Name (eg, city) [Newbury]:
Organization Name (eg, company) [My Company Ltd]:
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []: !!!!full qualified name!!!
Email Address []:<>

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
Request is in newreq.pem, private key is in newkey.pem

> ./CA.pl -sign
Using configuration from /etc/pki/tls/openssl.cnf
Enter pass phrase for ../../CA/private/cakey.pem:
Check that the request matches the signature
Signature ok
Certificate Details:
.....省略部分内容......

Certificate is to be certified until Apr 16 22:37:14 2008 GMT (365 days)
Sign the certificate? [y/n]:y


1 out of 1 certificate requests certified, commit? [y/n]y
Write out database with 1 new entries
Data Base Updated
Signed certificate is in newcert.pem

运行完两个步骤后，你会发现当前目录下创建了3个文件:
newreq.pem 创建证书请求文件，没什么用了
newcert.pem CA签发的证书
newkey.pem 证书对应的私钥

首先我们重命名证书文件和私钥文件
mv newcert.pem server.cert
mv newkey.pem server.key

然后给他们设置合适的权限,特别是私钥文件，一定要只有owner能读。否则ssl安全体系形同虚设！
chmod 644 server.cert
chmod 600 server.key (Nobody can read it except owner!!)

最后一步是把这两个文件和CA的证书文件拷贝到openldap存放证书的目录下，一般在/etc/openldap/cacerts
如果CA和ldap server不在同一个机器上，那么用scp拷贝即可。这里假设他们在同一台机器上

mv server.cert /etc/openldap/cacerts
mv serve.key /etc/openldap/cacerts
cp ../../CA/cacert.pem /etc/openldap/cacerts

1.3 创建client的证书
创建client的证书和上面创建server的证书类似。不过要注意的是
1）在输入Common Name的时候一定要输入clien的fully qualified name！！
2）证书文件和私钥文件可以命名为client.cert, client.key，它们和cacert.pem也拷贝到client端的/etc/openldap/cacerts

2 配置server
> service ldap stop # 首先停掉openldap server.

> vi /etc/openldap/slapd.conf
加入下面4行
TLSCACertificateFile /etc/openldap/cacerts/cacert.pem # 配置CA证书的路径
TLSCertificateFile /etc/openldap/cacerts/server.cert # 配置server证书的路径
TLSCertificateKeyFile /etc/openldap/cacerts/server.key # 配置server私钥的路径

TLSVerifyClient never
# 设置是否验证client的身份，其值可以是never/allow/try/demand
# 配置什么值取决于你的安全策略。仅仅就配置来说，
# 如果不需要认证client端的身份，那么client只需要有CA的证书就可以了
# 如果需要认证client端的身份，那么client 还 必须要有它自己的证书
# 我们首先介绍"never"的情况下client的配置，然后介绍"demand"的情况下client的配置

ssl start_tls
# 如果client端使用TLS协议连接，那么加上这一行。否则TLS连接会失败
# 加上这一行后，both SSL and TLS can be supported by this ldap server.

3 配置client

3.1 首先我们假设ldap server不需要验证client的身份
也就是在/etc/openldap/slapd.con里，TLSVerifyClient 设置为never。

>vi /etc/openldap/ldap.conf
需要加入或修改下面的内容

URI ldaps://ldapserver.foo.com # 一定要和server的证书里输入的full qualified name一样

TLS_CACERT /etc/openldap/cacerts/cacert.pem # CA的证书
TLS_REQCERT demand # client总是要求认证server端

> service ldap restart
> ldapsearch -x
如果有正确的输入，就表示配置成功了。

3.2 如果ldap server需要验证client的身份
也就是在/etc/openldap/slapd.conf里，TLSVerifyClient设置为demand。这种情况下，client需要有自己的证书和私钥。
配置clieng的证书和私钥只能在用户home目录下的ldaprc文件里。

> vi ~/ldaprc
加入下面的内容

TLS_REQCERT demand
TLS_CERT /etc/openldap/cacerts/client.cert
TLS_KEY /etc/openldap/cacerts/client.key

注意此用户对/etc/openldap/cacerts/client.key要有可读的权限！！

> service ldap restart
> ldapsearch -x
如果有正确的输入，就表示配置成功了。

4 调试方法

4.1 在调试模式启动slapd
> slapd -d127 -h "ldap:/// ldaps:///"
-d127是指定调试级别。slapd会在当前console启动，所有的连接信息都会在屏幕上打印出来。

4.2 用openssl client连接ssl 服务器

4.2.1 对于不需要client验证的情况
> openssl s_client -connect ldapserver.foo.com:636 -showcerts -state -CAfile /etc/openldap/cacerts/cacert.pem
file /etc/openldap/cacerts/cacert.pem
CONNECTED(00000003)
SSL_connect:before/connect initialization
SSL_connect:SSLv2/v3 write client hello A
SSL_connect:SSLv3 read server hello A
depth=1 /C=CN/ST=shanghai/O=dean/OU=mobile/CN=fedora.dean.com/emailAddress=[e-mail]
verify return:1
depth=0 /C=CN/ST=Shanga/L=shanghai/O=dean/OU=home/CN=fedora.dean.com/emailAddress=[e-mail]
verify return:1
SSL_connect:SSLv3 read server certificate A
SSL_connect:SSLv3 read server done A
SSL_connect:SSLv3 write client key exchange A
SSL_connect:SSLv3 write change cipher spec A

.......省略了部分内容.......

Compression: NONE
Expansion: NONE
SSL-Session:
Protocol : TLSv1
Cipher : AES256-SHA
Session-ID: 03FDE102050C7828C39E03D7A3F526E6E9D256115A0ADF7793538B616C5548ED
Session-ID-ctx:
Master-Key: 07A62B4E5060BF4542E49DC33C2C6D6F10FF266F48856A780187C759A3007CF2F18ECAB49DBA8915394D52179AC8FE9B
Key-Arg : None
Krb5 Principal: None
Start Time: 1198247985
Timeout : 300 (sec)
Verify return code: 0 (ok)
---
用"CTRL-C" 退出

4.2.2 对于需要clien验证的情况
> openssl s_client -connect ldapserver.foo.com:636 -showcerts -state
-CAfile /etc/openldap/cacerts/cacert.pem
-cert /etc/openldap/cacerts/client.cert
-key /etc/openldap/cacerts/client.key