分类： LINUX
2004-11-16 17:58:11
1. Before We Start ...
2. What Is a Thread ? Why Use Threads ?
3. Creating And Destroying Threads
4. Synchronizing Threads With Mutexes
1. What Is A Mutex ?
2. Creating And Initializing A Mutex
3. Locking And Unlocking A Mutex
4. Destroying A Mutex
5. Using A Mutex - A Complete Example
6. Starvation And Deadlock Situations
5. Refined Synchronization - Condition Variables
1. What Is A Condition Variable ?
2. Creating And Initializing A Condition Variable
3. Signaling A Condition Variable
4. Waiting On A Condition Variable
5. Destroying A Condition Variable
6. A Real Condition For A Condition Variable
7. Using A Condition Variable - A Complete Example
6. "Private" thread data - Thread - Specific Data
1. Overview Of Thread - Specific Data Support
2. Allocating Thread - Specific Data Block
3. Accessing Thread - Specific Data
4. Deleting Thread - Specific Data Block
5. A Complete Example
7. Thread Cancellation And Termination
1. Canceling A Thread
2. Setting Thread Cancellation State
3. Cancellation Points
4. Setting Thread Cleanup Functions
5. Synchronizing On Threads Exiting
6. Detaching A Thread
7. Threads Cancellation - A Complete Example
8. Using Threads For Responsive User Interface Programming
1. User Interaction - A Complete Example
9. Using 3 rd - Party Libraries In A Multi - Threaded Application
10. Using A Threads - Aware Debugger
This tutorial is an attempt to help you become familiar with multi-threaded programming with the POSIX threads (pthreads) library, and attempts to show how its features can be used in "real-life" programs. It explains the different tools defined by the library, shows how to use them, and then gives an example of using them to solve programming problems. There is an implicit assumption that the user has some theoretical familiarity with paralell programming (or multi-processing) concepts. Users without such background might find the concepts harder to grasp. A seperate tutorial will be prepared to explain the theoreticl background and terms to those who are familiar only with normal "serial" programming.
I would assume that users which are familiar with asynchronous programming models, such as those used in windowing environments (X, Motif), will find it easier to grasp the concepts of multi-threaded programming.
When talking about POSIX threads, one cannot avoid the question "Which draft of the POSIX threads standard shall be used?". As this threads standard has been revised over a period of several years, one will find that implementations adhering to different drafts of the standard have a different set of functions, different default values, and different nuances. Since this tutorial was written using a Linux system with the kernel-level LinuxThreads library, v0.5, programmers with access to other systems, using different versions of pthreads, should refer to their system's manuals in case of incompatibilities. Also, since some of the example programs are using blocking system calls, they won't work with user-level threading libraries (refer to our for more information).
Having said that, i'd try to check the example programs on other systems as well (Solaris 2.5 comes to mind), to make it more "cross-platform".
A thread is a semi-process, that has its own stack, and executes a given piece of code. Unlike a real process, the thread normally shares its memory with other threads (where as for processes we usually have a different memory area for each one of them). A Thread Group is a set of threads all executing inside the same process. They all share the same memory, and thus can access the same global variables, same heap memory, same set of file descriptors, etc. All these threads execute in parallel (i.e. using time slices, or if the system has several processors, then really in parallel).
The advantage of using a thread group instead of a normal serial program is that several operations may be carried out in parallel, and thus events can be handled immediately as they arrive (for example, if we have one thread handling a user interface, and another thread handling database queries, we can execute a heavy query requested by the user, and still respond to user input while the query is executed).
The advantage of using a thread group over using a process group is that context switching between threads is much faster than context switching between processes (context switching means that the system switches from running one thread or process, to running another thread or process). Also, communications between two threads is usually faster and easier to implement than communications between two processes.
On the other hand, because threads in a group all use the same memory space, if one of them corrupts the contents of its memory, other threads might suffer as well. With processes, the operating system normally protects processes from one another, and thus if one corrupts its own memory space, other processes won't suffer. Another advantage of using processes is that they can run on different machines, while all the threads have to run on the same machine (at least normally).
When a multi-threaded program starts executing, it has one thread running, which executes the main() function of the program. This is already a full-fledged thread, with its own thread ID. In order to create a new thread, the program should use the pthread_create() function. Here is how to use it:
#include
#include
/* function to be executed by the new thread */
void*
do_loop(void* data)
{
int i; /* counter, to print numbers */
int j; /* counter, for delay */
int me = *((int*)data); /* thread identifying number */
for (i=0; i<10; i++) {
for (j=0; j<500000; j++) /* delay loop */
;
printf("'%d' - Got '%d'n", me, i);
}
/* terminate the thread */
pthread_exit(NULL);
}
/* like any C program, program's execution begins in main */
int
main(int argc, char* argv[])
{
int thr_id; /* thread ID for the newly created thread */
pthread_t p_thread; /* thread's structure */
int a = 1; /* thread 1 identifying number */
int b = 2; /* thread 2 identifying number */
/* create a new thread that will execute 'do_loop()' */
thr_id = pthread_create(&p_thread, NULL, do_loop, (void*)&a);
/* run 'do_loop()' in the main thread as well */
do_loop((void*)&b);
/* NOT REACHED */
return 0;
}
A few notes should be mentioned about this program:
do_loop() function in parallel to the thread it creates. pthread_create() gets 4 parameters. The first parameter is used by pthread_create() to supply the program with information about the thread. The second parameter is used to set some attributes for the new thread. In our case we supplied a NULL pointer to tell pthread_create() to use the default values. The third parameter is the name of the function that the thread will start executing. The forth parameter is an argument to pass to this function. Note the cast to a 'void*'. It is not required by ANSI-C syntax, but is placed here for clarification. pthread_exit() Causes the current thread to exit and free any thread-specific resources it is taking. There is no need to use this call at the end of the thread's top function, since when it returns, the thread would exit automatically anyway. This function is useful if we want to exit a thread in the middle of its execution. In order to compile a multi-threaded program using gcc, we need to link it with the pthreads library. Assuming you have this library already installed on your system, here is how to compile our first program: gcc pthread_create.c -o pthread_create -lpthread
Note that for some of the programs later on this tutorial, one may need to add a '-D_GNU_SOURCE' flag to this compile line, to get the source compiled.
The source code for this program may be found in the file.
One of the basic problems when running several threads that use the same memory space, is making sure they don't "step on each other's toes". By this we refer to the problem of using a data structure from two different threads.
For instance, consider the case where two threads try to update two variables. One tries to set both to 0, and the other tries to set both to 1. If both threads would try to do that at the same time, we might get with a situation where one variable contains 1, and one contains 0. This is because a context-switch (we already know what this is by now, right?) might occur after the first tread zeroed out the first variable, then the second thread would set both variables to 1, and when the first thread resumes operation, it will zero out the second variable, thus getting the first variable set to '1', and the second set to '0'.
A basic mechanism supplied by the pthreads library to solve this problem, is called a mutex. A mutex is a lock that guarantees three things:
From these three points we can see how a mutex can be used to assure exclusive access to variables (or in general critical code sections). Here is some pseudo-code that updates the two variables we were talking about in the previous section, and can be used by the first thread:
lock mutex 'X1'.
set first variable to '0'.
set second variable to '0'.
unlock mutex 'X1'.
lock mutex 'X1'.
set first variable to '1'.
set second variable to '1'.
unlock mutex 'X1'.
In order to create a mutex, we first need to declare a variable of type pthread_mutex_t, and then initialize it. The simplest way it by assigning it the PTHREAD_MUTEX_INITIALIZER constant. So we'll use a code that looks something like this:
pthread_mutex_t a_mutex = PTHREAD_MUTEX_INITIALIZER;
There is another type of mutex, called 'recursive mutex', which allows the thread that locked it, to lock it several more times, without getting blocked (but other threads that try to lock the mutex now will get blocked). If the thread then unlocks the mutex, it'll still be locked, until it is unlocked the same amount of times as it was locked. This is similar to the way modern door locks work - if you turned it twice clockwise to lock it, you need to turn it twice counter-clockwise to unlock it. This kind of mutex can be created by assigning the constant PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP to a mutex variable.
In order to lock a mutex, we may use the function pthread_mutex_lock(). This function attempts to lock the mutex, or block the thread if the mutex is already locked by another thread. In this case, when the mutex is unlocked by the first process, the function will return with the mutex locked by our process. Here is how to lock a mutex (assuming it was initialized earlier):
int rc = pthread_mutex_lock(&a_mutex);
if (rc) { /* an error has occurred */
perror("pthread_mutex_lock");
pthread_exit(NULL);
}
/* mutex is now locked - do your stuff. */
.
.
After the thread did what it had to (change variables or data structures, handle file, or whatever it intended to do), it should free the mutex, using the pthread_mutex_unlock() function, like this:
rc = pthread_mutex_unlock(&a_mutex);
if (rc) {
perror("pthread_mutex_unlock");
pthread_exit(NULL);
}
After we finished using a mutex, we should destroy it. Finished using means no thread needs it at all. If only one thread finished with the mutex, it should leave it alive, for the other threads that might still need to use it. Once all finished using it, the last one can destroy it using the pthread_mutex_destroy() function:
rc = pthread_mutex_destroy(&a_mutex);
EINVAL error code from the lock or unlock function. After we have seen the full life cycle of a mutex, lets see an example program that uses a mutex. The program introduces two employees competing for the "employee of the day" title, and the glory that comes with it. To simulate that in a rapid pace, the program employs 3 threads: one that promotes Danny to "employee of the day", one that promotes Moshe to that situation, and a third thread that makes sure that the employee of the day's contents is consistent (i.e. contains exactly the data of one employee).
Two copies of the program are supplied. One that uses a mutex, and one that does not. Try them both, to see the differences, and be convinced that mutexes are essential in a multi-threaded environment.
The programs themselves are in the files accompanying this tutorial. The one that uses a mutex is . The one that does not use a mutex is . Read the comments inside the source files to get a better understanding of how they work.
pthread_mutex_lock() might block for a non-determined duration, in case of the mutex being already locked. If it remains locked forever, it is said that our poor thread is "starved" - it was trying to acquire a resource, but never got it. It is up to the programmer to ensure that such starvation won't occur. The pthread library does not help us with that. The pthread library might, however, figure out a "deadlock". A deadlock is a situation in which a set of threads are all waiting for resources taken by other threads, all in the same set. Naturally, if all threads are blocked waiting for a mutex, none of them will ever come back to life again. The pthread library keeps track of such situations, and thus would fail the last thread trying to call pthread_mutex_lock(), with an error of type EDEADLK. The programmer should check for such a value, and take steps to solve the deadlock somehow.
As we've seen before with mutexes, they allow for simple coordination - exclusive access to a resource. However, we often need to be able to make real synchronization between threads:
A condition variable is a mechanism that allows threads to wait (without wasting CPU cycles) for some even to occur. Several threads may wait on a condition variable, until some other thread signals this condition variable (thus sending a notification). At this time, one of the threads waiting on this condition variable wakes up, and can act on the event. It is possible to also wake up all threads waiting on this condition variable by using a broadcast method on this variable.
Note that a condition variable does not provide locking. Thus, a mutex is used along with the condition variable, to provide the necessary locking when accessing this condition variable.
Creation of a condition variable requires defining a variable of type pthread_cond_t, and initializing it properly. Initialization may be done with either a simple use of a macro named PTHREAD_COND_INITIALIZER or the usage of the pthread_cond_init() function. We will show the first form here: pthread_cond_t got_request = PTHREAD_COND_INITIALIZER;
This defines a condition variable named 'got_request', and initializes it.
Note: since the PTHREAD_COND_INITIALIZER is actually a structure initializer, it may be used to initialize a condition variable only when it is declared. In order to initialize it during runtime, one must use the pthread_cond_init() function.
In order to signal a condition variable, one should either the pthread_cond_signal() function (to wake up a only one thread waiting on this variable), or the pthread_cond_broadcast() function (to wake up all threads waiting on this variable). Here is an example using signal, assuming 'got_request' is a properly initialized condition variable: int rc = pthread_cond_signal(&got_request);
Or by using the broadcast function: int rc = pthread_cond_broadcast(&got_request);
When either function returns, 'rc' is set to 0 on success, and to a non-zero value on failure. In such a case (failure), the return value denotes the error that occured (EINVAL denotes that the given parameter is not a condition variable. ENOMEM denotes that the system has run out of memory.
Note: success of a signaling operation does not mean any thread was awakened - it might be that no thread was waiting on the condition variable, and thus the signaling does nothing (i.e. the signal is lost).
It is also not remembered for future use - if after the signaling function returns another thread starts waiting on this condition variable, a further signal is required to wake it up.
If one thread signals the condition variable, other threads would probably want to wait for this signal. They may do so using one of two functions, pthread_cond_wait() or pthread_cond_timedwait(). Each of these functions takes a condition variable, and a mutex (which should be locked before calling the wait function), unlocks the mutex, and waits until the condition variable is signaled, suspending the thread's execution. If this signaling causes the thread to awake (see discussion of pthread_cond_signal() earlier), the mutex is automagically locked again by the wait funciton, and the wait function returns.
pthread_cond_timedwait() allows the programmer to specify a timeout for the waiting, after which the function always returns, with a proper error value (ETIMEDOUT) to notify that condition variable was NOT signaled before the timeout passed. The pthread_cond_wait() would wait indefinitely if it was never signaled. Here is how to use these two functions. We make the assumption that 'got_request' is a properly initialized condition variable, and that 'request_mutex' is a properly initialized mutex. First, we try the pthread_cond_wait() function:
/* first, lock the mutex */
int rc = pthread_mutex_lock(&request_mutex);
if (rc) { /* an error has occurred */
perror("pthread_mutex_lock");
pthread_exit(NULL);
}
/* mutex is now locked - wait on the condition variable. */
/* During the execution of pthread_cond_wait, the mutex is unlocked. */
rc = pthread_cond_wait(&got_request, &request_mutex);
if (rc == 0) { /* we were awakened due to the cond. variable being signaled */
/* The mutex is now locked again by pthread_cond_wait() */
/* do your stuff... */
.
}
/* finally, unlock the mutex */
pthread_mutex_unlock(&request_mutex);
pthread_cond_timedwait() function:
#include
#include
struct timeval now; /* time when we started waiting */
struct timespec timeout; /* timeout value for the wait function */
int done; /* are we done waiting? */
/* first, lock the mutex */
int rc = pthread_mutex_lock(&a_mutex);
if (rc) { /* an error has occurred */
perror("pthread_mutex_lock");
pthread_exit(NULL);
}
/* mutex is now locked */
/* get current time */
gettimeofday(&now);
/* prepare timeout value. */
/* Note that we need an absolute time. */
timeout.tv_sec = now.tv_sec + 5
timeout.tv_nsec = now.tv_usec * 1000; /* timeval uses micro-seconds. */
/* timespec uses nano-seconds. */
/* 1 micro-second = 1000 nano-seconds. */
/* wait on the condition variable. */
/* we use a loop, since a Unix signal might stop the wait before the timeout */
done = 0;
while (!done) {
/* remember that pthread_cond_timedwait() unlocks the mutex on entrance */
rc = pthread_cond_timedwait(&got_request, &request_mutex, &timeout);
switch(rc) {
case 0: /* we were awakened due to the cond. variable being signaled */
/* the mutex was now locked again by pthread_cond_timedwait. */
/* do your stuff here... */
.
.
done = 0;
break;
default: /* some error occurred (e.g. we got a Unix signal) */
if (errno == ETIMEDOUT) { /* our time is up */
done = 0;
}
break; /* break this switch, but re-do the while loop. */
}
}
/* finally, unlock the mutex */
pthread_mutex_unlock(&request_mutex);
Note: it might be that a condition variable that has 2 or more threads waiting on it is signaled many times, and yet one of the threads waiting on it never awakened. This is because we are not guaranteed which of the waiting threads is awakened when the variable is signaled. It might be that the awakened thread quickly comes back to waiting on the condition variables, and gets awakened again when the variable is signaled again, and so on. The situation for the un-awakened thread is called 'starvation'. It is up to the programmer to make sure this situation does not occur if it implies bad behavior. Yet, in our server example from before, this situation might indicate requests are coming in a very slow pace, and thus perhaps we have too many threads waiting to service requests. In this case, this situation is actually good, as it means every request is handled immediately when it arrives.
Note 2: when the mutex is being broadcast (using pthread_cond_broadcast), this does not mean all threads are running together. Each of them tries to lock the mutex again before returning from their wait function, and thus they'll start running one by one, each one locking the mutex, doing their work, and freeing the mutex before the next thread gets its chance to run.
After we are done using a condition variable, we should destroy it, to free any system resources it might be using. This can be done using the pthread_cond_destroy(). In order for this to work, there should be no threads waiting on this condition variable. Here is how to use this function, again, assuming 'got_request' is a pre-initialized condition variable:
int rc = pthread_cond_destroy(&got_request);
if (rc == EBUSY) { /* some thread is still waiting on this condition variable */
/* handle this case here... */
.
.
}
A note should be taken about condition variables - they are usually pointless without some real condition checking combined with them. To make this clear, lets consider the server example we introduced earlier. Assume that we use the 'got_request' condition variable to signal that a new request has arrived that needs handling, and is held in some requests queue. If we had threads waiting on the condition variable when this variable is signaled, we are assured that one of these threads will awake and handle this request.
However, what if all threads are busy handling previous requests, when a new one arrives? the signaling of the condition variable will do nothing (since all threads are busy doing other things, NOT waiting on the condition variable now), and after all threads finish handling their current request, they come back to wait on the variable, which won't necessarily be signaled again (for example, if no new requests arrive). Thus, there is at least one request pending, while all handling threads are blocked, waiting for a signal.
In order to overcome this problem, we may set some integer variable to denote the number of pending requests, and have each thread check the value of this variable before waiting on the variable. If this variable's value is positive, some request is pending, and the thread should go and handle it, instead of going to sleep. Further more, a thread that handled a request, should reduce the value of this variable by one, to make the count correct.
Lets see how this affects the waiting code we have seen above.
/* number of pending requests, initially none */
int num_requests = 0;
.
.
/* first, lock the mutex */
int rc = pthread_mutex_lock(&request_mutex);
if (rc) { /* an error has occurred */
perror("pthread_mutex_lock");
pthread_exit(NULL);
}
/* mutex is now locked - wait on the condition variable */
/* if there are no requests to be handled. */
rc = 0;
if (num_requests == 0)
rc = pthread_cond_wait(&got_request, &request_mutex);
if (num_requests > 0 && rc == 0) { /* we have a request pending */
/* unlock mutex - so other threads would be able to handle */
/* other reqeusts waiting in the queue paralelly. */
rc = pthread_mutex_unlock(&request_mutex);
/* do your stuff... */
.
.
/* decrease count of pending requests */
num_requests--;
/* and lock the mutex again - to remain symmetrical,. */
rc = pthread_mutex_lock(&request_mutex);
}
}
/* finally, unlock the mutex */
pthread_mutex_unlock(&request_mutex);
As an example for the actual usage of condition variables, we will show a program that simulates the server we have described earlier - one thread, the receiver, gets client requests. It inserts the requests to a linked list, and a hoard of threads, the handlers, are handling these requests. For simplicity, in our simulation, the receiver thread creates requests and does not read them from real clients.
The program source is available in the file , and contains many comments. Please read the source file first, and then read the following clarifying notes.
pthread_cond_wait() function is confusing at first. It is best to add a comment regarding this behavior in the code, or else someone that reads this code might accidentally add a further mutex lock. In "normal", single-thread programs, we sometimes find the need to use a global variable. Ok, so good old teach' told us it is bad practice to have global variables, but they sometimes do come handy. Especially if they are static variables - meaning, they are recognized only on the scope of a single file.
In multi-threaded programs, we also might find a need for such variables. We should note, however, that the same variable is accessible from all the threads, so we need to protect access to it using a mutex, which is extra overhead. Further more, we sometimes need to have a variable that is 'global', but only for a specific thread. Or the same 'global' variable should have different values in different threads. For example, consider a program that needs to have one globally accessible linked list in each thread, but note the same list. Further, we want the same code to be executed by all threads. In this case, the global pointer to the start of the list should be point to a different address in each thread.
In order to have such a pointer, we need a mechanism that enables the same global variable to have a different location in memory. This is what the thread-specific data mechanism is used for.
In the thread-specific data (TSD) mechanism, we have notions of keys and values. Each key has a name, and pointer to some memory area. Keys with the same name in two separate threads always point to different memory locations - this is handled by the library functions that allocate memory blocks to be accessed via these keys. We have a function to create a key (invoked once per key name for the whole process), a function to allocate memory (invoked separately in each thread), and functions to de-allocate this memory for a specific thread, and a function to destroy the key, again, process-wide. we also have functions to access the data pointed to by a key, either setting its value, or returning the value it points to.
The pthread_key_create() function is used to allocate a new key. This key now becomes valid for all threads in our process. When a key is created, the value it points to defaults to NULL. Later on each thread may change its copy of the value as it wishes. Here is how to use this function:
/* rc is used to contain return values of pthread functions */
int rc;
/* define a variable to hold the key, once created. */
pthread_key_t list_key;
/* cleanup_list is a function that can clean up some data */
/* it is specific to our program, not to TSD */
extern void* cleanup_list(void*);
/* create the key, supplying a function that'll be invoked when it's deleted. */
rc = pthread_key_create(&list_key, cleanup_list);
pthread_key_create() returns, the variable 'list_key' points to the newly created key. pthread_key_create(), will be automatically invoked by the pthread library when our thread exits, with a pointer to the key's value as its parameter. We may supply a NULL pointer as the function pointer, and then no function will be invoked for key. Note that the function will be invoked once in each thread, even thought we created this key only once, in one thread.pthread_key_create() function succeeds, it returns 0. Otherwise, it returns some error code. PTHREAD_KEYS_MAX keys that may exist in our process at any given time. An attempt to create a key after PTHREAD_KEYS_MAX exits, will cause a return value of EAGAIN from the pthread_key_create() function. After we have created a key, we may access its value using two pthread functions: pthread_getspecific() and pthread_setspecific(). The first is used to get the value of a given key, and the second is used to set the data of a given key. A key's value is simply a void pointer (void*), so we can store in it anything that we want. Lets see how to use these functions. We assume that 'a_key' is a properly initialized variable of type pthread_key_t that contains a previously created key:
/* this variable will be used to store return codes of pthread functions */
int rc;
/* define a variable into which we'll store some data */
/* for example, and integer. */
int* p_num = (int*)malloc(sizeof(int));
if (!p_num) {
fprintf(stderr, "malloc: out of memoryn";
exit(1);
}
/* initialize our variable to some value */
(*p_num) = 4;
/* now lets store this value in our TSD key. */
/* note that we don't store 'p_num' in our key. */
/* we store the value that p_num points to. */
rc = pthread_setspecific(a_key, (void*)p_num);
.
.
/* and somewhere later in our code... */
.
.
/* get the value of key 'a_key' and print it. */
{
int* p_keyval = (int*)pthread_getspecific(a_key);
if (p_keyval != NULL) {
printf("value of 'a_key' is: %dn", *p_keyval);
}
}
Note that if we set the value of the key in one thread, and try to get it in another thread, we will get a NULL, since this value is distinct for each thread.
Note also that there are two cases where pthread_getspecific() might return NULL:
pthread_setspecific(). The pthread_key_delete() function may be used to delete keys. But do not be confused by this function's name: it does not delete memory associated with this key, nor does it call the destructor function defined during the key's creation. Thus, you still need to do memory cleanup on your own if you need to free this memory during runtime. However, since usage of global variables (and thus also thread-specific data), you usually don't need to free this memory until the thread terminate, in which case the pthread library will invoke your destructor functions anyway.
Using this function is simple. Assuming list_key is a pthread_key_t variable pointing to a properly created key, use this function like this: int rc = pthread_key_delete(key);
the function will return 0 on success, or EINVAL if the supplied variable does not point to a valid TSD key.
None yet. Give me a while to think of one...... sorry. All i can think of right now is 'global variables are evil'. I'll try to find a good example for the future. If you have a good example, please let me know.
As we create threads, we need to think about terminating them as well. There are several issues involved here. We need to be able to terminate threads cleanly. Unlike processes, where a very ugly method of using signals is used, the folks that designed the pthreads library were a little more thoughtful. So they supplied us with a whole system of canceling a thread, cleaning up after a thread, and so on. We will discuss these methods here.
When we want to terminate a thread, we can use the pthread_cancel function. This function gets a thread ID as a parameter, and sends a cancellation request to this thread. What this thread does with this request depends on its state. It might act on it immediately, it might act on it when it gets to a cancellation point (discussed below), or it might completely ignore it. We'll see later how to set the state of a thread and define how it acts on cancellation requests. Lets first see how to use the cancel function. We assume that 'thr_id' is a variable of type pthread_id containing the ID of a running thread:
pthread_cancel(thr_id);
pthread_cancel() function returns 0, so we cannot know if it succeeded or not. A thread's cancel state may be modified using several methods. The first is by using the pthread_setcancelstate() function. This function defines whether the thread will accept cancellation requests or not. The function takes two arguments. One that sets the new cancel state, and one into which the previous cancel state is stored by the function. Here is how it is used:
int old_cancel_state;
pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &old_cancel_state);
int old_cancel_state;
pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, &old_cancel_state);
A similar function, named pthread_setcanceltype() is used to define how a thread responds to a cancellation request, assuming it is in the 'ENABLED' cancel state. One option is to handle the request immediately (asynchronously). The other is to defer the request until a cancellation point. To set the first option (asynchronous cancellation), do something like:
int old_cancel_type;
pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, &old_cancel_type);
int old_cancel_type;
pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &old_cancel_type);
You might wonder - "What if i never set the cancellation state or type of a thread?". Well, in such a case, the pthread_create() function automatically sets the thread to enabled deferred cancellation, that is, PTHREAD_CANCEL_ENABLE for the cancel mode, and PTHREAD_CANCEL_DEFERRED for the cancel type.
As we've seen, a thread might be in a state where it does not handle cancel requests immediately, but rather defers them until it reaches a cancellation point. So what are these cancellation points?
In general, any function that might suspend the execution of a thread for a long time, should be a cancellation point. In practice, this depends on the specific implementation, and how conformant it is to the relevant POSIX standard (and which version of the standard it conforms to...). The following set of pthread functions serve as cancellation points:
pthread_join() pthread_cond_wait() pthread_cond_timedwait() pthread_testcancel() sem_wait() sigwait() pthread_testcancel() is unique - it's only purpose is to test whether a cancellation request is pending for this thread. If there is, it executes the cancellation sequence. If not, it returns immediately. This function may be used in a thread that does a lot of processing without getting into a "natural" cancellation state. Note: In real conformant implementations of the pthreads standard, normal system calls that cause the process to block, such as read(), select(), wait() and so on, are also cancellation points. The same goes for standard C library functions that use these system calls (the various printf functions, for example).
One of the features the pthreads library supplies is the ability for a thread to clean up after itself, before it exits. This is done by specifying one or more functions that will be called automatically by the pthreads library when the thread exits, either due to its own will (e.g. calling pthread_exit()), or due to it being canceled.
Two functions are supplied for this purpose. The pthread_cleanup_push() function is used to add a cleanup function to the set of cleanup functions for the current thread. The pthread_cleanup_pop() function removes the last function added with pthread_cleanup_push(). When the thread terminates, its cleanup functions are called in the reverse order of their registration. So the the last one to be registered is the first one to be called.
When the cleanup functions are called, each one is supplied with one parameter, that was supplied as the second parameter to the pthread_cleanup_push() function call. Lets see how these functions may be used. In our example we'll see how these functions may be used to clean up some memory that our thread allocates when it starts running.
/* first, here is the cleanup function we want to register. */
/* it gets a pointer to the allocated memory, and simply frees it. */
void
cleanup_after_malloc(void* allocated_memory)
{
if (allocated_memory)
free(allocated_memory);
}
/* and here is our thread's function. */
/* we use the same function we used in our */
/* thread-pool server. */
void*
handle_requests_loop(void* data)
{
.
.
/* this variable will be used later. please read on... */
int old_cancel_type;
/* allocate some memory to hold the start time of this thread. */
/* assume MAX_TIME_LEN is a previously defined macro. */
char* start_time = (char*)malloc(MAX_TIME_LEN);
/* push our cleanup handler. */
pthread_cleanup_push(cleanup_after_malloc, (void*)start_time);
.
.
/* here we start the thread's main loop, and do whatever is desired.. */
.
.
.
/* and finally, we unregister the cleanup handler. our method may seem */
/* awkward, but please read the comments below for an explanation. */
/* put the thread in deferred cancellation mode. */
pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &old_cancel_type);
/* supplying '1' means to execute the cleanup handler */
/* prior to unregistering it. supplying '0' would */
/* have meant not to execute it. */
pthread_cleanup_pop(1);
/* restore the thread's previous cancellation mode. */
pthread_setcanceltype(old_cancel_type, NULL);
}
As we can see, we allocated some memory here, and registered a cleanup handler that will free this memory when our thread exits. After the execution of the main loop of our thread, we unregistered the cleanup handler. This must be done in the same function that registered the cleanup handler, and in the same nesting level, since both pthread_cleanup_pop() and pthread_cleanup_pop() functions are actually macros that add a '{' symbol and a '}' symbol, respectively.
As to the reason that we used that complex piece of code to unregister the cleanup handler, this is done to assure that our thread won't get canceled in the middle of the execution of our cleanup handler. This could have happened if our thread was in asynchronous cancellation mode. Thus, we made sure it was in deferred cancellation mode, then unregistered the cleanup handler, and finally restored whatever cancellation mode our thread was in previously. Note that we still assume the thread cannot be canceled in the execution of pthread_cleanup_pop() itself - this is true, since pthread_cleanup_pop() is not a cancellation point.
Sometimes it is desired for a thread to wait for the end of execution of another thread. This can be done using the pthread_join() function. It receives two parameters: a variable of type pthread_t, denoting the thread to be joined, and an address of a void* variable, into which the exit code of the thread will be placed (or PTHREAD_CANCELED if the joined thread was canceled).
The pthread_join() function suspends the execution of the calling thread until the joined thread is terminated.
For example, consider our earlier thread pool server. Looking back at the code, you'll see that we used an odd sleep() call before terminating the process. We did this since the main thread had no idea when the other threads finished processing all pending requests. We could have solved it by making the main thread run a loop of checking if no more requests are pending, but that would be a busy loop.
A cleaner way of implementing this, is by adding three changes to the code:
The first 2 changes are rather easy. We create a global variable named 'done_creating_requests' and set it to '0' initially. Each thread checks the contents of this variable every time before it intends to go to wait on the condition variable (i.e. the requests queue is empty).
The main thread is modified to set this variable to '1' after it finished generating all requests. Then the condition variable is being broadcast, in case any of the threads is waiting on it, to make sure all threads go and check the 'done_creating_requests' flag.
The last change is done using a pthread_join() loop: call pthread_join() once for each handler thread. This way, we know that only after all handler threads have exited, this loop is finished, and then we may safely terminate the process. If we didn't use this loop, we might terminate the process while one of the handler threads is still handling a request.
The modified program is available in the file named . Look for the word 'CHANGE' (in capital letter