Zenwalk中NTFS分区读写及vimrc配置

　　为本子换了一个160G的大硬盘（PATA最大的了），没办法40G一个区，只能用NTFS了（XP）。原来，一直是对FAT32分区进行读写的，用于和XP勾通~安装了NTFS-3G后，无论用什么方法挂都不能挂C，只有D能，而且D挂上去了，好多东西也看不到！原来，用slackware 12时也挂过了呀，没什么问题呀！又找了一个网上其它网友的参数写进fstab，还是一样！最后在Zenwalk的wiki找到了答案，以下是我的fstab中关于ntfs项：

/dev/sda1 /mnt/ntfs-c ntfs-3g defaults,user,rw 1 0
/dev/sda5 /mnt/ntfs-d ntfs-3g defaults,user,rw 1 0
/dev/sda6 /mnt/ntfs-e ntfs-3g defaults,user,rw 1 0

　　VIM的配置，好像比以前也变了！不再自动备份修改文件了，于是又参考网上的其它配置文件把自己的配置改了一下，很简单的几项（关于自动备份修改文件、在底部显示行数信息、自动识别文件编码等）：

" Rick set :
set ruler
set backup

" --------------------------
" Encoding Settings Section
" --------------------------
if has("multi_byte")
" Set fileencoding priority
if getfsize(expand("%")) > 0
set fileencodings=ucs-bom,utf-8,cp936,big5,euc-jp,euc-kr,latin1
else
set fileencodings=cp936,big5,euc-jp,euc-kr,latin1
endif

" CJK environment detection and corresponding setting
if v:lang =~ "^zh_CN"
" Use cp936 to support GBK, euc-cn == gb2312
set encoding=cp936
set termencoding=cp936
set fileencoding=cp936
elseif v:lang =~ "^zh_TW"
" cp950, big5 or euc-tw
" Are they equal to each other?
set encoding=big5
set termencoding=big5
set fileencoding=big5
elseif v:lang =~ "^ko"
" Copied from someone's dotfile, untested
set encoding=euc-kr
set termencoding=euc-kr
set fileencoding=euc-kr
elseif v:lang =~ "^ja_JP"
" Copied from someone's dotfile, unteste
set encoding=euc-jp
set termencoding=euc-jp
set fileencoding=euc-jp
endif
" Detect UTF-8 locale, and replace CJK setting if needed
if v:lang =~ "utf8$" || v:lang =~ "UTF-8$"
set encoding=utf-8
set termencoding=utf-8
set fileencoding=utf-8
endif
else
echoerr "Sorry, this version of (g)vim was not compiled with multi_byte"
endif