HP-UX CONSOLE 命令

HP-UX CONSOLE 命令

 

AC : Alert Display Configuration
AR : Configure the Automatic System Restart
CA : Configure local and remote console parameters
CE : Log a chassis code in the GSP chassis code history buffer
CL : Display the history of the Console
CO : Return to Console Mode
CSP : Connect to another Service Processor via LAN
CT : Configure Tracing into GSP Firmware
DC : Default configuration
DI : Disconnect remote or LAN console
DR : OBSOLETE. Use the ER and EL commands
EL : Configure LAN console access options
ER : Configure remote/modem port access options
HE : Display the list of available commands
IT : Modify GSP inactivity timeouts
LC : Configure the LAN connection
LR : OBSOLETE. Use the ER command.
LS : Display LAN configuration
MFG : Enter the manufacturing mode
MR : Modem Reset
MS : Display the status of the Modem
OT : Disable overtemperature control
PC : Remote Power Control
PG : Configure Paging
PS : Display the status of the Power Management Module
QMM : Quit the manufacturing mode
RP : OBSOLETE. Use the DC command
RS : System reset through RST signal
SDM : Set Display Mode (hex or text)
SE : Activate a system session on local or remote port
SL : Display SPU status logs
SO : Configure security options and access control
SS : Display the status of the system processors
TC : System reset through INIT signal
TE : Sends a message to other terminals
UR : OBSOLETE. Use the ER command
VFP : Activates Alert Log Display (all ports except internal port)
VT : View Trace buffer
WHO : Display a list of GSP connected users
XD : GSP Diagnostics and Reset
XU : Upgrade the GSP Firmware
ZCTGNAYOR : Clear GSP NVM at your own risk
ZDTPMT : Dump the GSP Internal Post Mortem Trace