Chinaunix首页 | 论坛 | 博客
  • 博客访问: 91835
  • 博文数量: 24
  • 博客积分: 1411
  • 博客等级: 上尉
  • 技术积分: 260
  • 用 户 组: 普通用户
  • 注册时间: 2010-03-15 13:16
文章分类
文章存档

2010年(24)

我的朋友

分类: 嵌入式

2010-04-10 22:08:52

 

 -----------------------------
|   STM32103ZET6-PPP-DEMO     |
|          Based              |
|      uCosII   System        |
 -----------------------------
lcp_init: xmit_accm=0 0 0 0
upap_init: 0
Init_Modem()
lcp_init: xmit_accm=0 0 0 0
pppMain: unit 0: Connecting
pppStartCB: unit 0
ppp_set_xaccm[0]: outACCM=0 0 0 0
ppp_send_config[0]: outACCM=FF FF FF FF
ppp_recv_config[0]: inACCM=0 0 0 0
lcp_lowerup: asyncmap=0 0 0 0
LCP: lowerup state 0 -> 2
auth_reset: 0
lcp_addci: L opt=2 0
lcp_addci: opt=7
lcp_addci: opt=8
pppWrite[0]: len=37
fsm_sdata(LCP): Sent code 1,1,14.
LCP: sending Configure-Request, id 1
LCP: open state 2 -> 6
pppInProc[0]: got 83 bytes
pppInput[0]: LCP len=19
fsm_input(LCP):1,1,19
fsm_rconfreq(LCP): Rcvd id 1 state=6
lcp_reqci: Nak AUTHTYPE CHAP not allowed
lcp_reqci:  ASYNCMAP=0 PCOMPRESSION ACCOMPRESSION
lcp_reqci: returning CONFNAK.
pppWrite[0]: len=22
fsm_sdata(LCP): Sent code 3,1,8.
pppInput[0]: LCP len=14
fsm_input(LCP):2,1,14
fsm_rconfack(LCP): Rcvd id 1 state=6
lcp_acki: Ack
pppInProc[0]: got 43 bytes
pppInput[0]: LCP len=18
fsm_input(LCP):1,2,18
fsm_rconfreq(LCP): Rcvd id 2 state=7
lcp_reqci: rcvd ASYNCMAP=0 PAP (C023) PCOMPRESSION ACCOMPRESSION
lcp_reqci: returning CONFACK.
pppWrite[0]: len=42
fsm_sdata(LCP): Sent code 2,2,18.
ppp_send_config[0]: outACCM=0 0 0 0
ppp_recv_config[0]: inACCM=0 0 0 0
link_established: 0
upap_lowerup: 0 s=0
IPCP: lowerup state 0 -> 2
upap_authwithpeer: 0 user=none password=none s=1
pppWrite[0]: len=21
pap_sauth: Sent id 1
pppInProc[0]: got 11 bytes
pppInput[0]: PAP len=5
pap_rauthack: Rcvd id 1 s=3
Remote message:
auth_withpeer_success: 0 proto=C023
pppWrite[0]: len=29
fsm_sdata(IPCP): Sent code 1,1,22.
IPCP: sending Configure-Request, id 1
IPCP: open state 2 -> 6
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppMainWakeup: unit 0 sio_read len=1504 returned 0
pppInProc[0]: got 18 bytes
pppInput[0]: IPCP len=4
fsm_input(IPCP):1,1,4
fsm_rconfreq(IPCP): Rcvd id 1 state=6
ipcp_reqci: Requesting peer address
ipcp_reqci: returning Configure-NAK
pppWrite[0]: len=18
fsm_sdata(IPCP): Sent code 3,1,10.
pppInProc[0]: got 30 bytes
pppInput[0]: IPCP len=22
fsm_input(IPCP):3,1,22
fsm_rconfnakrej(IPCP): Rcvd id 1 state=6
local IP address 10.55.42.190
primary DNS address 211.136.17.107
secondary DNS address 211.136.20.203
pppWrite[0]: len=29
fsm_sdata(IPCP): Sent code 1,2,22.
IPCP: sending Configure-Request, id 2
pppInput[0]: IPCP len=4
fsm_input(IPCP):1,2,4
fsm_rconfreq(IPCP): Rcvd id 2 state=6
ipcp_reqci: returning Configure-ACK
pppWrite[0]: len=12
fsm_sdata(IPCP): Sent code 2,2,4.
pppInProc[0]: got 28 bytes
pppInput[0]: IPCP len=22
fsm_input(IPCP):2,2,22
fsm_rconfack(IPCP): Rcvd id 2 state=8
np_up: 0 proto=21
np_up: maxconnect=0 idle_time_limit=0
ipcp: up
Could not determine remote IP address
ipcp: down
np_down: 0 proto=21
sifdown: unit 0: linkStatusCB=8000ee1 errCode=0
pppWrite[0]: len=48
fsm_sdata(IPCP): Sent code 5,3,41.
IPCP: close reason=Could not determine remote IP address state 9 -> 4
pppInProc[0]: got 47 bytes
pppInput[0]: IPCP len=41
fsm_input(IPCP):6,3,41
fsm_rtermack(IPCP): state=4
np_finished: 0 proto=21
link_down: 0
upap_lowerdown: 0 s=4
IPCP: lowerdown state 2 -> 0
IPCP: close reason=LCP down state 0 -> 0
pppMainWakeup: unit 0
ppp_send_config[0]: outACCM=FF FF FF FF
ppp_recv_config[0]: inACCM=0 0 0 0
pppWrite[0]: len=45
fsm_sdata(LCP): Sent code 5,2,32.
LCP: close reason=No network protocols running state 9 -> 4
pppInProc[0]: got 44 bytes
pppInput[0]: LCP len=32
fsm_input(LCP):6,2,32
fsm_rtermack(LCP): state=4
link_terminated: 0
Connection terminated.
pppMainWakeup: unit 0
pppMain: unit 0: PHASE_DEAD
pppMain: unit 0: linkStatusCB=8000ee1 errCode=0
阅读(1521) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~