一篇微调iptables设置的好文

一篇微调iptables设置的好文



# Linux kernel tweaking for performance and security on a busy Linux
# server with a decent amount of memory.
#
# This file should be saved as /etc/sysctl.conf
# You can source it manually if your system has booted by using:
# sysctl -e -p /etc/sysctl.conf
#
# Paul Day, paul (at) bur.st
#
# Last updated 02/03/05 and tested on 2.6.9
#

# Increase RPC slots
sunrpc.tcp_slot_table_entries = 32
sunrpc.udp_slot_table_entries = 32
# Increase size of RPC datagram queue length
net.unix.max_dgram_qlen = 50
# Log spoofed, source routed and redirects
net.ipv4.conf.default.log_martians = 1
# Don't accept source routes
net.ipv4.conf.default.accept_source_route = 0
# Don't send redirects
net.ipv4.conf.default.send_redirects = 0
# Source route verification on - incoming packets must match outgoing routing
net.ipv4.conf.default.rp_filter = 1
# Don't accept redirects
net.ipv4.conf.default.accept_redirects = 0
# Don't forward source routes
net.ipv4.conf.default.mc_forwarding = 0
# Disable forwarding
net.ipv4.conf.default.forwarding = 0
# Log spoofed, source routed and redirects
net.ipv4.conf.all.log_martians = 1
# Don't relay bootp
net.ipv4.conf.all.bootp_relay = 0
# Don't proxy arp for anyone
net.ipv4.conf.all.proxy_arp = 0
# Don't accept source route packets
net.ipv4.conf.all.accept_source_route = 0
# Don't send redirects
net.ipv4.conf.all.send_redirects = 0
# Source route verification on - incoming packets must match outgoing routing
net.ipv4.conf.all.rp_filter = 1
# Don't accept redirects
net.ipv4.conf.all.accept_redirects = 0
# Don't forward source routes
net.ipv4.conf.all.mc_forwarding = 0
# Don't enable forwarding
net.ipv4.conf.all.forwarding = 0
# Don't allow the arp table to become bigger than this
net.ipv4.neigh.default.gc_thresh3 = 2048
# Tell the gc when to become aggressive with arp table cleaning.
# Adjust this based on size of the LAN. 256 is suitable for most
net.ipv4.neigh.default.gc_thresh2 = 1024
# Adjust where the gc will leave arp table alone - set to 32.
net.ipv4.neigh.default.gc_thresh1 = 32
# Adjust to arp table gc to clean-up more often
net.ipv4.neigh.default.gc_interval = 30
# Increase TCP
net.ipv4.neigh.default.proxy_qlen = 96
net.ipv4.neigh.default.unres_qlen = 6
# Increase size of socket buffers
net.ipv4.tcp_rmem = 4096        98304        349520
net.ipv4.tcp_wmem = 4096        65535        262142
net.ipv4.tcp_mem = 98304        262142        393216
# Turn off sack
net.ipv4.tcp_dsack = 0
# Don't use ECN because too many sites have wacky routers that can't handle it`
net.ipv4.tcp_ecn = 0
net.ipv4.tcp_reordering = 3
# Turn off sack/fack
net.ipv4.tcp_fack = 0
# Enable bad error message Protection
net.ipv4.icmp_ignore_bogus_error_responses = 1
# Ignore broadcasts pings, could become part of a Smurf
net.ipv4.icmp_echo_ignore_broadcasts = 1
# But don't ignore directed pings
net.ipv4.icmp_echo_ignore_all = 0
# Widen local port range
net.ipv4.ip_local_port_range = 33000        60000
# Bump up TCP socket queuer to help with syn floods
net.ipv4.tcp_max_syn_backlog = 2048
# Turn syn-cookie protection on
net.ipv4.tcp_syncookies = 1
# Drop it so lack of FIN times out quicker
net.ipv4.tcp_fin_timeout = 30
# How many times to retry killing an alive TCP connection
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_retries1 = 3
# Enable a fix for RFC1337 - time-wait assassination hazards in TCP
net.ipv4.tcp_rfc1337 = 1
# Drop keep-alive time
net.ipv4.tcp_keepalive_time = 3600
# Set number of times to retry a SYN-ACK in a half-open new connections
net.ipv4.tcp_synack_retries = 5
# Set number of times to retry SYN in a new connection
net.ipv4.tcp_syn_retries = 5
# Turn off sack
net.ipv4.tcp_sack = 0
# Enable really big (>65kB) TCP window scaling if we want it.
net.ipv4.tcp_window_scaling = 1
# Turn off timestamps
# Turn this back on if you're on a gigabit or very busy network
# Having it off is one less thing the IP stack needs to work on
net.ipv4.tcp_timestamps = 0
# Increase number of incoming connections backlog
net.core.somaxconn = 512
# Bump optmem_max up
net.core.optmem_max = 20480
# Increase number of incoming connections backlog
net.core.netdev_max_backlog = 1024
net.core.dev_weight = 64
# Bump up default r/wmem to max
net.core.rmem_default = 262141
net.core.wmem_default = 262141
# Bump up max r/wmem
net.core.rmem_max = 262141
net.core.wmem_max = 262141
# Increase size of file handles and inode cache
fs.file-max = 209708

留心里面经典的地方慢慢琢磨~