simulator下载
这个地址已经修正《5/21》
simulator要的包winpcap
cisco7200的ios(已经修正)
ftp://anonymous:guest4336026%40files.lt@213.33.252.34/pub/cisco/7200/c7200-js-mz.124-7.bin |
FTP Server: 213.33.252.34, User Name: anonymous, Password: guest4336026@files.lt File Path: /pub/cisco/7200/c7200-js-mz.124-7.bin |
安装
运行
dynamips.exe -r 128 -t npe-100 -M vxr -p 2:PA-FE-TX -s 2:0:udp:10002:127.0.0.1:10001 -p 3:PA-FE-TX c7200-js-mz.124-7.bin
就会出现后面这样的提示
Cisco 7200 Simulation Platform (version 0.2.4-x86)
Copyright (c) 2005,2006 Christophe Fillot.
Virtual RAM size set to 128 MB.
IOS image file: c7200-js-mz.124-7.bin
NVRAM is empty, setting config register to 0x2142
C7200: Warning, no MAC address set.
CPU0 Device list:
ram : 0x000000000000 (0x08000000)
rom : 0x00001fc00000 (0x00400000)
remote_ctrl : 0x000011000000 (0x00001000)
bootflash : 0x00001a000000 (0x00800000)
nvram : 0x00001e000000 (0x00020000)
zero : 0x00001f000000 (0x00c00000)
mp_fpga : 0x00001e800000 (0x00001000)
io_fpga : 0x00001e840000 (0x00001000)
pci_io : 0x000100000000 (0x00200000)
gt64010 : 0x000014000000 (0x00001000)
PA-FE-TX(3) : 0x000049000000 (0x00800000)
PA-FE-TX(2) : 0x00004d000000 (0x00800000)
C7200-IO-FE(0) : 0x000048000000 (0x00800000)
PCI Bus "MB0/MB1/MB2" Device list:
clpd6729 : ID 1013:1100, Bus 0, Dev. 5, Func. 0
C7200-IO-FE(0) : ID 1011:0009, Bus 0, Dev. 6, Func. 0, IRQ: 2
PA-FE-TX(2) : ID 1011:0009, Bus 11, Dev. 0, Func. 0, IRQ: 2
PA-FE-TX(3) : ID 1011:0009, Bus 6, Dev. 0, Func. 0, IRQ: 2
dec21050 : ID 1011:0001, Bus 10, Dev. 3, Func. 0
dec21050 : ID 1011:0001, Bus 4, Dev. 3, Func. 0
dec21050 : ID 1011:0001, Bus 10, Dev. 2, Func. 0
dec21050 : ID 1011:0001, Bus 4, Dev. 2, Func. 0
dec21050 : ID 1011:0001, Bus 10, Dev. 1, Func. 0
dec21050 : ID 1011:0001, Bus 4, Dev. 1, Func. 0
dec21050 : ID 1011:0001, Bus 0, Dev. 4, Func. 0
dec21050 : ID 1011:0001, Bus 0, Dev. 3, Func. 0
dec21050 : ID 1011:0001, Bus 0, Dev. 2, Func. 0
dec21050 : ID 1011:0001, Bus 0, Dev. 1, Func. 0
gt64010 : ID 11ab:0146, Bus 0, Dev. 0, Func. 0, IRQ: 4
Loading ELF file 'c7200-js-mz.124-7.bin'...
* Adding section at virtual address 0x80008000
ELF entry point: 0x80008000
Starting simulation (CPU0 PC=0xffffffffbfc00000), JIT is enabled.
Cisco 7200 (Predator) ROMMON emulation microcode.
Launching IOS image at 0x80008000...
Self decompressing the image : #################################################################################################
################################################################################################################################
############################################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 7200 Software (C7200-JS-M), Version 12.4(7), RELEASE SOFTWARE (fc6)
Technical Support:
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 01-Mar-06 05:13 by alnguyen
Image text-base: 0x6000905C, data-base: 0x62866000
Cisco 7206VXR (NPE100) processor (revision B) with 114688K/16384K bytes of memory.
Processor board ID 4294967295
R4600 CPU at 100MHz, Implementation 32, Rev 1.2
6 slot VXR midplane, Version 2.1
Last reset from power-on
--------------------------------------------------------------
This Version of Cisco IOS Software is not supported on NPE100.
Please select a version of Cisco IOS software compatible with
this processor from .
--------------------------------------------------------------
Number of Fast PAs = 3
Number of Fast+Medium PAs = 3
Total number of PA bandwidth points consumed = 600
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <>
for c7200 bandwidth points oversubscription and usage guidelines.
WARNING: Number of Fast PAs Exceeds 2
WARNING: Number of Fast PAs Exceeds 2
3 FastEthernet interfaces
125K bytes of NVRAM.
8192K bytes of Flash internal SIMM (Sector size 256K).
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
后面的你就知道怎么搞了,不用我说了吧
哪位达人有办法模拟aix告诉一声啊