Chinaunix首页 | 论坛 | 博客
  • 博客访问: 1339550
  • 博文数量: 464
  • 博客积分: 9399
  • 博客等级: 中将
  • 技术积分: 6364
  • 用 户 组: 普通用户
  • 注册时间: 2011-02-19 09:15
文章分类

全部博文(464)

文章存档

2014年(12)

2013年(123)

2012年(173)

2011年(156)

我的朋友

分类: 系统运维

2013-06-28 10:39:54

Cisco IOS Software, 7200 Software (C7200-JK9S-M), Version 12.4(13a), RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 07-Mar-07 01:54 by prod_rel_team
 
ROM: System Bootstrap, Version 12.1(20000824:081033) [dbeazley-cosmos_e_LATEST 101], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)
 
ShangHai_7206_1 uptime is 1 day, 20 hours, 42 minutes
System returned to ROM by power-on
System image file is "disk0:c7200-jk9s-mz.124-13a.bin"
 
 
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
          
A summary of U.S. laws governing Cisco cryptographic products may be found at:
 
If you require further assistance please contact us by sending email to
export@cisco.com.
 
Cisco 7206VXR (NPE300) processor (revision D) with 229376K/65536K bytes of memory.
Processor board ID 16078284
R7000 CPU at 262MHz, Implementation 39, Rev 2.1, 256KB L2 Cache
6 slot VXR midplane, Version 2.0
 
Last reset from power-on
 
--------------------------------------------------------------
This Version of Cisco IOS Software is not supported on NPE300.
Please select a version of Cisco IOS software compatible with
this processor from
--------------------------------------------------------------
 
PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb0_mb1 has a total of 600 bandwidth points. 
This configuration is within the PCI bus capacity and is supported. 
 
PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 500 bandwidth points 
This configuration is within the PCI bus capacity and is supported. 
 
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <
for c7200 bandwidth points oversubscription and usage guidelines.
 
 
1 Ethernet interface
2 FastEthernet interfaces
1 Gigabit Ethernet interface
1 ATM interface
125K bytes of NVRAM.
 
125440K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
 
 
==================================================================================================
 
出现上述问题是IOS过高,导致引擎板负荷过大,虽然可以启动但长时间运行会导致设备温度过高,内存使用率较大,甚至设备宕机。针对此类问题可以用低IOS来替代现有版本,一般12.2版本就可以使用,如果12.2版本无法正常建立连接就使用12.3版本IOS。
当使用低版本IOS后,设备如果还出现宕机,则应该考虑设备内存是否够大,可以加内存条来解决。
阅读(1134) | 评论(1) | 转发(0) |
给主人留下些什么吧!~~