lighttpd配置介绍

lighttpd配置介绍

一，为什么要使用lighttpd?
    apache不可以吗？
    在支持纯静态的对象时，比如图片，文件等 ，
    lighttpd速度更快，更理想
    至于它和apache的比较，很多文档，大家可以google一下

二，从何处下载lighttpd?
   
    这个是它的官方站

三，如何安装？
    1,编译安装
      ./configure --prefix=/usr/local/lighttpd
      make
      make install

configure完毕以后，会给出一个激活的模块和没有激活模块的清单，可以检查一下，是否自己需要的模块都已经激活，在enable的模块中一定要有“mod_rewrite”这一项，否则重新检查pcre是否安装。

    2,编译后配置
      cp doc/sysconfig.lighttpd /etc/sysconfig/lighttpd
      mkdir /etc/lighttpd
      cp doc/lighttpd.conf /etc/lighttpd/lighttpd.conf

      如果你的Linux是RedHat/CentOS，那么：
      cp doc/rc.lighttpd.redhat /etc/init.d/lighttpd
      如果你的Linux是SuSE，那么：
      cp doc/rc.lighttpd /etc/init.d/lighttpd
      其他Linux发行版本可以自行参考该文件内容进行修改。
      然后修改/etc/init.d/lighttpd，把
      LIGHTTPD_BIN=/usr/sbin/lighttpd
      改为
      LIGHTTPD_BIN=/usr/local/lighttpd/sbin/lighttpd

      此脚本用来控制lighttpd的启动关闭和重起：
      /etc/init.d/lighttpd start
      /etc/init.d/lighttpd stop
      /etc/init.d/lighttpd restart
    3,配置
      修改/etc/lighttpd/lighttpd.conf
      1）server.modules
      取消需要用到模块的注释，mod_rewrite，mod_access，mod_fastcgi，mod_simple_vhost，mod_cgi，      mod_compress，mod_accesslog是一般需要用到的。
      我们放开                               "mod_rewrite"
                                             "mod_compress",

      2）server.document-root, server.error-log，accesslog.filename需要指定相应的目录
         server.document-root        = "/www/phc/html/"
         mkdir /usr/local/lighttpd/logs
         chmod 777 /usr/local/lighttpd/logs/
          touch /usr/local/lighttpd/logs/error.log
          chmod 777 /usr/local/lighttpd/logs/error.log

         server.errorlog             = "/usr/local/lighttpd/logs/error.log"
accesslog.filename             = "|/usr/sbin/cronolog /usr/local/lighttpd/logs/%Y/%m/%d/accesslog.log"

      3）用什么权限来运行lighttpd
         server.username            = "nobody"
         server.groupname           = "nobody"
         从安全角度来说，不建议用root权限运行web server，可以自行指定普通用户权限。

       4）静态文件压缩
          mkdir /usr/local/lighttpd/compress
          chmod 777 /usr/local/lighttpd/compress/
compress.cache-dir         = "/usr/local/lighttpd/compress/"
compress.filetype          = ("text/plain", "text/html","text/javascript","text/css")

          可以指定某些静态资源类型使用压缩方式传输，节省带宽，
          对于大量AJAX应用来说，可以极大提高页面加载速度。

        5）server.port                = 81

        6）#$HTTP["url"] =~ ".pdf$" {
    131 # server.range-requests = "disable"
    132 #}

    4，优化
     1 最大连接数

            默认是1024
            修改 server.max-fds,大流量网站推荐2048.

            因为lighttpd基于线程,而apache(MPM-prefork)基于子进程,
            所以apache需要设置startservers,maxclients等,这里不需要
     2 stat() 缓存

               stat() 这样的系统调用,开销也是相当明显的.
              缓存能够节约时间和环境切换次数(context switches)

              一句话,lighttpd.conf加上
              server.stat-cache-engine = “fam”

              lighttpd还另外提供simple(缓存1秒内的stat()),disabled选项.
              相信没人会选disabled吧.
      3 常连接(HTTP Keep-Alive)

             一般来说,一个系统能够打开的文件个数是有限制的(文件描述符限制)
            常连接占用文件描述符,对非并发的访问没有什么意义.

            (文件描述符的数量和许多原因有关,比如日志文件数量,并发数目等)

           这是lighttpd在keep-alive方面的默认值.
server.max-keep-alive-requests = 128
server.max-keep-alive-idle = 30

换言之,lighttpd最多可以同时承受30秒长的常连接,每个连接最多请求128个文件.
但这个默认值确实不适合非并发这种多数情况.

lighttpd.conf 中减小
server.max-keep-alive-requests
server.max-keep-alive-idle
两个值,可以减缓这种现象.

甚至可以关闭lighttpd keep-alive.
server.max-keep-alive-requests = 0
4 事件处理

对于linux kernel 2.6来说,没有别的可说
lighttpd.conf中加上这一句足矣
server.event-handler = “linux-sysepoll”

另外,
linux 2.4 使用 linux-rtsig
freebsd 使用 freebsd-kqueue
unix 使用 poll
5 网络处理

lighttpd 大量使用了 sendfile() 这样一个高效的系统调用.
减少了从应用程序到网卡间的距离.
(同时也减少了lighttpd对cpu的占用,这部分占用转嫁到内核身上了)

根据平台,可以设置不同的参数.
server.network-backend = “linux-sendfile”
(linux)
freebsd: freebsd-sendfile
unix: writev

如果有兴趣的话,也可以看看lighttpd在async io(aio)上的实现,仅限 lighttpd 1.5
(linux-aio-sendfile, posix-aio, gthread-aio)

此外,网络方面,核心的参数也需要适当进行修改,
这里就不需要详细说明了.

    5,启动
    6,配置日志
    logrotate & cronolog
logrotate很粗暴,直接把进程砍了然后移动日志
cronolog就是比较不错的方式.
lighttpd用法:
accesslog.filename = " |/usr/sbin/cronolog /var/log/lighttpd/%Y/%m/%d/access_XXXX.log"

    7,安装pcre
      从何处下载?
     
       wget
     安装过程：
       　　./configure
　　make clean
　　make
　　make install

8,支持fam
   gamin默认已安装了此包
   yum install gamin-devel

   另外配置时需添加：
   ./configure --prefix=/usr/local/lighttpd --with-fam

9,测试lighttpd的启动：
/usr/local/lighttpd/sbin/lighttpd -f /usr/local/lighttpd/etc/lighttpd.conf

10,防止盗链
#$HTTP["referer"] !~ "^($|*.(chinafotopress.com|chinafotopress.cn))" {     
#    $HTTP["url"] =~ ".(jpg|jpeg|png|gif|rar|zip|mp3)$" {
#       #url.redirect = (".*"    => "")
#        url.access-deny = (".jpg")
#    }
#}

#$HTTP["referer"] == "" {
#    $HTTP["url"] =~ ".(jpg|jpeg|png|gif|rar|zip|mp3)$" {
#       #url.redirect = (".*"    => "")
#        url.access-deny = (".jpg")
#    }
#}

日志处理

Sometimes, Google Analytics just isn't enough when it comes to keeping and interpreting server stats. After finding a suitable log file analyzer, AWStats, the next step involved separating out the log files on a per domain basis. When the server was first set up, everything was shuttled to one set of access and error log files. While AWStats could technically analyze this log, the suggested set up involves having one set per domain. This article details the process of separating out the log files and making sure that these new files get rotated correctly.
Create Log Directories

While it would be possible to keep all of the files in one directory and to just name them relative to the domain, for this tutorial we will assume that we will create subdirectories based on the domain name. The first step would be to create a directory for each domain.

sudo -u www-data mkdir /var/log/lighttpd/
sudo -u www-data mkdir /var/log/lighttpd/
Update lighttpd.conf

After creating the directories, it's time to update the lighttpd conf file in /etc/lighttpd. We'll want to set the log files by host name. We already had directives setting the server.document-root for these domains so we only added the bolded lines.

$HTTP["host"] =~ "(^|\.)example1.com"$" {
server.document-root = "/var/www/",
server.errorlog = "/var/log/lighttpd//error.log",
accesslog.filename = "/var/log/lighttpd//access.log",
}

$HTTP["host"] =~ "(^|\.)example2.com$" {
server.document-root = "/var/www/",
server.errorlog = "/var/log/lighttpd//error.log",
accesslog.filename = "/var/log/lighttpd//access.log",
}

After adding these directives, you will need to restart the server.

sudo /etc/init.d/lighttpd restart
Update Logrotate

Finally, we will want logrotate to rotate these new directories. Since our main goal is to integrate the logs with AWStats, it made sense to add a separate entry for each log directory. However, if you don't need call different scripts for the different domains, feel free to create one directive. We just copied the existing logrotate configuration and editted it for each of the domains. Below are examples of what this might look like.

/var/log/lighttpd/*.log {
daily
missingok
copytruncate
rotate 60
compress
notifempty
sharedscripts
postrotate
if [ -f /var/run/lighttpd.pid ]; then \
kill -HUP $(
fi;
endscript
}
/var/log/lighttpd//*.log {
daily
missingok
copytruncate
rotate 60
compress
notifempty
sharedscripts
postrotate
if [ -f /var/run/lighttpd.pid ]; then \
kill -HUP $(
fi;
endscript
}
/var/log/lighttpd//*.log {
daily
missingok
copytruncate
rotate 60
compress
notifempty
sharedscripts
postrotate
if [ -f /var/run/lighttpd.pid ]; then \
kill -HUP $(
fi;
endscript
}

To make just one configuration entry, it would look like this:

"/var/log/lighttpd/*.log" "/var/log/lighttpd//*.log" "/var/log/lighttpd//*.log" {
daily
missingok
copytruncate
rotate 60
compress
notifempty
sharedscripts
postrotate
if [ -f /var/run/lighttpd.pid ]; then \
kill -HUP $(
fi;
endscript
}
Sources

    * Lighttpd rotating log files with logrotate tool
    * Howto: Lighttpd web server setting up virtual hosting

Trackback URL for this post:

lighttpd虚拟主机配置
$HTTP["host"] == "bbs.xxx.com" {
server.name = "bbs.xxx.com"
server.document-root = "/var/www/bbs"
server.errorlog = "/var/www/bbs/error.log"
accesslog.filename = "/var/www/bbs/access.log"
}
else

lighttpd.conf解释

server.use-ipv6 = "disable" # 缺省为禁用
server.event-handler = "linux-sysepoll" # Linux环境下epoll系统调用可提高吞吐量
#server.max-worker = 10 # 如果你的系统资源没跑满，可考虑调高 lighttpd进程数
server.max-fds = 4096 # 默认的，应该够用了，可根据实际情况调整
server.max-connections = 4096 # 默认等于 server.max-fds
server.network-backend = "linux-sendfile"
server.max-keep-alive-requests = 0 # 在一个keep-alive会话终止连接前能接受处理的最大请求数。0为禁止

# 设置要加载的module
server.modules = (
"mod_rewrite",
"mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
"mod_auth",
"mod_expire",
# "mod_status",
# "mod_setenv",
"mod_proxy_core",
"mod_proxy_backend_http",
"mod_proxy_backend_fastcgi",
# "mod_proxy_backend_scgi",
# "mod_proxy_backend_ajp13",
# "mod_simple_vhost",
"mod_evhost",
# "mod_userdir",
# "mod_cgi",
"mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )

# 网站根目录
server.document-root = "/var/www/"

# 错误日志位置
server.errorlog = "/var/log/lighttpd/error.log"

# 网站Index
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )

# 访问日志, 以及日志格式 (combined), 使用X-Forwarded-For可越过代理读取真实ip
accesslog.filename = "/var/log/lighttpd/access.log"
accesslog.format = "%{X-Forwarded-For}i %v %u %t \"%r\" %s %b \"%{User-Agent}i\" \"%{Referer}i\""

# 设置禁止访问的文件扩展名
url.access-deny = ( "~", ".inc", ".tpl" )

# 服务监听端口
server.port = 80

# 进程id记录位置
server.pid-file = "/var/run/lighttpd.pid"

# virtual directory listings 如果没有找到index文件就列出目录。建议disable。
dir-listing.activate = "disable"

# 服务运行使用的用户及用户组
server.username = "www"
server.groupname = "www"

# gzip压缩存放的目录以及需要压缩的文件类型
compress.cache-dir = "/tmp/lighttpd/cache/compress/"
compress.filetype = ("text/plain", "text/html")

# fastcgi module
# for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
$HTTP["url"] =~ "\.php$" {
proxy-core.balancer = "round-robin"
proxy-core.allow-x-sendfile = "enable"
# proxy-core.check-local = "enable"
proxy-core.protocol = "fastcgi"
proxy-core.backends = ( "unix:/tmp/php-fastcgi1.sock","unix:/tmp/php-fastcgi2.sock" )
proxy-core.max-pool-size = 16
}

# 权限控制
auth.backend = "htpasswd"
auth.backend.htpasswd.userfile = "/var/www/htpasswd.userfile"

# 基于 evhost 的虚拟主机 针对域名
$HTTP["host"] == "a.lostk.com" {
server.document-root = "/var/www/lostk/"
server.errorlog = "/var/log/lighttpd/lostk-error.log"
accesslog.filename = "/var/log/lighttpd/lostk-access.log"

# 设定文件过期时间
expire.url = (
"/css/" => "access 2 hours",
"/js/" => "access 2 hours",
)

# url 跳转
url.redirect = (
"^/$" => "/xxx/index.html",
)

# url 重写 (cakephp可用)
url.rewrite = (
"^/(css|js)/(.*)$" => "/$1/$2",
"^/([^.]+)$" => "/index.php?url=$1",
)

# 权限控制
auth.require = ( "" =>
(
"method" => "basic",
"realm" => "admin only",
"require" => "user=admin1|user=admin2" # 允许的用户, 用户列表文件 在上面配置的auth.backend.htpasswd.userfile 里
),
)
}

# 针对端口的虚拟主机
$SERVER["socket"] == "192.168.0.1:8000" {
server.document-root = "/var/www/xxx/"
server.errorlog = "/var/log/lighttpd/test-error.log"
accesslog.filename = "/var/log/lighttpd/test-access.log"

# ...
}

安装：
cd ~/lighttpd-1.4.28
  894  ./configure --prefix=/usr/local/lighttpd --with-openssl --with-pcre --with-memcache --with-zlib --with-bzip2 --with-mysql  && make  && make install


启动参数 /usr/local/lighttpd/sbin/lighttpd   -D  -f  /usr/local/lighttpd/conf/lighttpd.conf  &



root@test conf]#
[root@test conf]# cat /usr/local/lighttpd/conf/lighttpd.conf
#server.modules         = (
#                    "mod_rewrite",
#                    "mod_redirect",
#                    "mod_access",
#                    "mod_fastcgi",
#                    "mod_compress",
#                    "mod_accesslog" )
#
#server.document-root = "/usr/local/lighttpd/html"
#server.errorlog = "/usr/local/lighttpd/log/lighttpd.error.log"
#accesslog.filename = "/usr/local/lighttpd/log/access.log"
#server.pid-file         = "/var/run/lighttpd.pid"
#compress.cache-dir       = "/tmp"
#compress.filetype       = ("text/plain", "text/html")

fastcgi.server         = ( ".php" =>
                    ( "localhost" =>
                    (
                      "socket" => "/tmp/php-fastcgi.socket",
#                      "bin-path" => "/usr/local/php-fcgi/bin/php"
                       "bin-path" => "/usr/local/php/bin/php-cgi"
                      )
                    )
                  )


















#######################################################################
##
## /etc/lighttpd/lighttpd.conf
##
## check /etc/lighttpd/conf.d/*.conf for the configuration of modules.
##
#######################################################################

#######################################################################
##
## Some Variable definition which will make chrooting easier.
##
## if you add a variable here. Add the corresponding variable in the
## chroot example aswell.
##
var.log_root    = "/var/log/lighttpd"
var.server_root = "/srv/www"
var.state_dir   = "/var/run"
var.home_dir    = "/var/lib/lighttpd"
var.conf_dir    = "/etc/lighttpd"

##
## run the server chrooted.
##
## This requires root permissions during startup.
##
## If you run Chrooted set the the variables to directories relative to
## the chroot dir.
##
## example chroot configuration:
##
#var.log_root    = "/logs"
#var.server_root = "/"
#var.state_dir   = "/run"
#var.home_dir    = "/lib/lighttpd"
#var.vhosts_dir  = "/vhosts"
#var.conf_dir    = "/etc"
#
#server.chroot   = "/srv/www"

##
## Some additional variables to make the configuration easier
##

##
## Base directory for all virtual hosts
##
## used in:
## conf.d/evhost.conf
## conf.d/simple_vhost.conf
## vhosts.d/vhosts.template
##
var.vhosts_dir  = server_root + "/vhosts"

##
## Cache for mod_compress
##
## used in:
## conf.d/compress.conf
##
var.cache_dir   = "/var/cache/lighttpd"

##
## Base directory for sockets.
##
## used in:
## conf.d/fastcgi.conf
## conf.d/scgi.conf
##
var.socket_dir  = home_dir + "/sockets"

##
#######################################################################

#######################################################################
##
## Load the modules.
include "modules.conf"

##
#######################################################################

#######################################################################
##
##  Basic Configuration
## ---------------------
##
server.port = 80

##
## Use IPv6?
##
server.use-ipv6 = "enable"

##
## bind to a specific IP
##
#server.bind = "localhost"

##
## Run as a different username/groupname.
## This requires root permissions during startup.
##
server.username  = "lighttpd"
server.groupname = "lighttpd"

##
## enable core files.
##
#server.core-files = "disable"

##
## Document root
##
server.document-root = server_root + "/htdocs"

##
## The value for the "Server:" response field.
##
## It would be nice to keep it at "lighttpd".
##
#server.tag = "lighttpd"

##
## store a pid file
##
server.pid-file = state_dir + "/lighttpd.pid"

##
#######################################################################

#######################################################################
##
##  Logging Options
## ------------------
##
## all logging options can be overwritten per vhost.
##
## Path to the error log file
##
server.errorlog             = log_root + "/error.log"

##
## If you want to log to syslog you have to unset the
## server.errorlog setting and uncomment the next line.
##
#server.errorlog-use-syslog = "enable"

##
## Access log config
##
include "conf.d/access_log.conf"

##
## The debug options are moved into their own file.
## see conf.d/debug.conf for various options for request debugging.
##
include "conf.d/debug.conf"

##
#######################################################################

#######################################################################
##
##  Tuning/Performance
## --------------------
##
## corresponding documentation:
## http://www.lighttpd.net/documentation/performance.html
##
## set the event-handler (read the performance section in the manual)
##
## possible options on linux are:
##
## select
## poll
## linux-sysepoll
##
## linux-sysepoll is recommended on kernel 2.6.
##
server.event-handler = "linux-sysepoll"

##
## The basic network interface for all platforms at the syscalls read()
## and write(). Every modern OS provides its own syscall to help network
## servers transfer files as fast as possible
##
## linux-sendfile - is recommended for small files.
## writev         - is recommended for sending many large files
##
server.network-backend = "linux-sendfile"

##
## As lighttpd is a single-threaded server, its main resource limit is
## the number of file descriptors, which is set to 1024 by default (on
## most systems).
##
## If you are running a high-traffic site you might want to increase this
## limit by setting server.max-fds.
##
## Changing this setting requires root permissions on startup. see
## server.username/server.groupname.
##
## By default lighttpd would not change the operation system default.
## But setting it to 2048 is a better default for busy servers.
##
server.max-fds = 2048

##
## Stat() call caching.
##
## lighttpd can utilize FAM/Gamin to cache stat call.
##
## possible values are:
## disable, simple or fam.
##
server.stat-cache-engine = "simple"

##
## Fine tuning for the request handling
##
## max-connections == max-fds/2 (maybe /3)
## means the other file handles are used for fastcgi/files
##
server.max-connections = 1024

##
## How many seconds to keep a keep-alive connection open,
## until we consider it idle.
##
## Default: 5
##
#server.max-keep-alive-idle = 5

##
## How many keep-alive requests until closing the connection.
##
## Default: 16
##
#server.max-keep-alive-requests = 16

##
## Maximum size of a request in kilobytes.
## By default it is unlimited (0).
##
## Uploads to your server cant be larger than this value.
##
#server.max-request-size = 0

##
## Time to read from a socket before we consider it idle.
##
## Default: 60
##
#server.max-read-idle = 60

##
## Time to write to a socket before we consider it idle.
##
## Default: 360
##
#server.max-write-idle = 360

##
##  Traffic Shaping
## -----------------
##
## see /usr/share/doc/lighttpd/traffic-shaping.txt
##
## Values are in kilobyte per second.
##
## Keep in mind that a limit below 32kB/s might actually limit the
## traffic to 32kB/s. This is caused by the size of the TCP send
## buffer.
##
## per server:
##
#server.kbytes-per-second = 128

##
## per connection:
##
#connection.kbytes-per-second = 32

##
#######################################################################

#######################################################################
##
##  Filename/File handling
## ------------------------

##
## files to check for if .../ is requested
## index-file.names            = ( "index.php", "index.rb", "index.html",
##                                 "index.htm", "default.htm" )
##
index-file.names += (
  "index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
)

##
## deny access the file-extensions
##
## ~    is for backupfiles from vi, emacs, joe, ...
## .inc is often used for code includes which should in general not be part
##      of the document-root
url.access-deny             = ( "~", ".inc" )

##
## disable range requests for pdf files
## workaround for a bug in the Acrobat Reader plugin.
##
$HTTP["url"] =~ "\.pdf$" {
  server.range-requests = "disable"
}

##
## url handling modules (rewrite, redirect)
##
#url.rewrite                = ( "^/$"             => "/server-status" )
#url.redirect               = ( "^/wishlist/(.+)" => "" )

##
## both rewrite/redirect support back reference to regex conditional using %n
##
#$HTTP["host"] =~ "^www\.(.*)" {
#  url.redirect            = ( "^/(.*)" => "http://%1/$1" )
#}

##
## which extensions should not be handle via static-file transfer
##
## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
##
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )

##
## error-handler for status 404
##
#server.error-handler-404   = "/error-handler.html"
#server.error-handler-404   = "/error-handler.php"

##
## Format: .html
## -> ..../status-404.html for 'File not found'
##
#server.errorfile-prefix    = "/srv/www/htdocs/errors/status-"

##
## mimetype mapping
##
include "conf.d/mime.conf"

##
## directory listing configuration
##
include "conf.d/dirlisting.conf"

##
## Should lighttpd follow symlinks?
##
server.follow-symlink = "enable"

##
## force all filenames to be lowercase?
##
#server.force-lowercase-filenames = "disable"

##
## defaults to /var/tmp as we assume it is a local harddisk
##
server.upload-dirs = ( "/var/tmp" )

##
#######################################################################


#######################################################################
##
##  SSL Support
## -------------
##
## To enable SSL for the whole server you have to provide a valid
## certificate and have to enable the SSL engine.::
##
##   ssl.engine = "enable"
##   ssl.pemfile = "/path/to/server.pem"
##
## The HTTPS protocol does not allow you to use name-based virtual
## hosting with SSL. If you want to run multiple SSL servers with
## one lighttpd instance you must use IP-based virtual hosting: ::
##
##   $SERVER["socket"] == "10.0.0.1:443" {
##     ssl.engine                  = "enable"
##     ssl.pemfile                 = "/etc/ssl/private/"
##     server.name                 = ""
##
##     server.document-root        = "/srv/www/vhosts/example.com/www/"
##   }
##

## If you have a .crt and a .key file, cat them together into a
## single PEM file:
## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
##   > /etc/ssl/private/lighttpd.pem
##
#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"

##
## optionally pass the CA certificate here.
##
##
#ssl.ca-file = ""

##
#######################################################################

#######################################################################
##
## custom includes like vhosts.
##
#include "conf.d/config.conf"
#include_shell "cat /etc/lighttpd/vhosts.d/*.conf"
##
#######################################################################
[root@test conf]#




































root@test conf]# cat  modules.conf
#######################################################################
##
##  Modules to load
## -----------------
##
## at least mod_access and mod_accesslog should be loaded
## all other module should only be loaded if really neccesary
##
## - saves some time
## - saves memory
##
## the default module set contains:
##
## "mod_indexfile", "mod_dirlisting", "mod_staticfile"
##
## you dont have to include those modules in your list
##
## Modules, which are pulled in via conf.d/*.conf
##
## NOTE: the order of modules is important.
##
## - mod_accesslog     -> conf.d/access_log.conf
## - mod_compress      -> conf.d/compress.conf
## - mod_status        -> conf.d/status.conf
## - mod_webdav        -> conf.d/webdav.conf
## - mod_cml           -> conf.d/cml.conf
## - mod_evhost        -> conf.d/evhost.conf
## - mod_simple_vhost  -> conf.d/simple_vhost.conf
## - mod_mysql_vhost   -> conf.d/mysql_vhost.conf
## - mod_trigger_b4_dl -> conf.d/trigger_b4_dl.conf
## - mod_userdir       -> conf.d/userdir.conf
## - mod_rrdtool       -> conf.d/rrdtool.conf
## - mod_ssi           -> conf.d/ssi.conf
## - mod_cgi           -> conf.d/cgi.conf
## - mod_scgi          -> conf.d/scgi.conf
## - mod_fastcgi       -> conf.d/fastcgi.conf
## - mod_proxy         -> conf.d/proxy.conf
## - mod_secdownload   -> conf.d/secdownload.conf
## - mod_expire        -> conf.d/expire.conf
##

server.modules = (
   "mod_access",
   "mod_alias",
   "mod_auth",
   "mod_evasive",
   "mod_redirect",
   "mod_rewrite",
   "mod_setenv",
   "mod_usertrack",
   "mod_rewrite",
   "mod_fastcgi",
   "mod_cgi",
   "mod_simple_vhost",
   "mod_compress",
   "mod_accesslog",
)

##
#######################################################################

#######################################################################
##
##  Config for various Modules
##

##
## mod_ssi
##
#include "conf.d/ssi.conf"

##
## mod_status
##
#include "conf.d/status.conf"

##
## mod_webdav
##
#include "conf.d/webdav.conf"

##
## mod_compress
##
#include "conf.d/compress.conf"

##
## mod_userdir
##
#include "conf.d/userdir.conf"

##
## mod_magnet
##
#include "conf.d/magnet.conf"

##
## mod_cml
##
#include "conf.d/cml.conf"

##
## mod_rrdtool
##
#include "conf.d/rrdtool.conf"

##
## mod_proxy
##
#include "conf.d/proxy.conf"

##
## mod_expire
##
#include "conf.d/expire.conf"

##
## mod_secdownload
##
#include "conf.d/secdownload.conf"

##
#######################################################################

#######################################################################
##
## CGI modules
##

##
## SCGI (mod_scgi)
##
#include "conf.d/scgi.conf"

##
## FastCGI (mod_fastcgi)
##
#include "conf.d/fastcgi.conf"

##
## plain old CGI (mod_cgi)
##
#include "conf.d/cgi.conf"

##
#######################################################################

#######################################################################
##
## VHost Modules
##
##  Only load ONE of them!
## ========================
##

##
## You can use conditionals for vhosts aswell.
##
## see http://www.lighttpd.net/documentation/configuration.html
##

##
## mod_evhost
##
#include "conf.d/evhost.conf"

##
## mod_simple_vhost
##
#include "conf.d/simple_vhost.conf"

##
## mod_mysql_vhost
##
#include "conf.d/mysql_vhost.conf"

##

[root@test conf]#