机器 HP superdome,操作系统 HP-UX 11.31
由于之前HBA 卡驱动 FibrChanl-02 B.11.31.0903 ,在做集群时,经常发现vgchange -a e 不能激活,导致集群切换失败。
后来更新驱动为 FibrChanl-02 B.11.31.0909 ,可以解决 vgchange -a e 的问题,但是fcmsutil 命令却不能用了。如果驱动安装的是 FibrChanl-02 B.11.31.0906 应该没有这个问题。
没有 fcmsutil 这个命令怎么查看 HBA 卡的 wwn 呢?可以通过 scsimgr 这个命令是获取!
#[/]ioscan -funCfc
Class I H/W Path Driver S/W State H/W Type Description
======================================================================
fc 0 2/0/4/0/0/0/0 fclp CLAIMED INTERFACE HP AD299-60001 4Gb PCIe 1-port Fibre Channel Adapter
/dev/fclp0
fc 1 2/0/5/0/0/0/0 fclp CLAIMED INTERFACE HP AD299-60001 4Gb PCIe 1-port Fibre Channel Adapter
/dev/fclp1
#[/]fcmsutil /dev/fclp0
Expected FCLP Versions:
FCLP MAJOR version: 4
FCLP minor version: 1
Actual FCLP Versions:
FCLP MAJOR version: 5
FCLP minor version: 1
fcmsutil /dev/fclp0: The version of this utility is not compatible with the
installed driver.
#[/]scsimgr get_info -D /dev/fclp0
STATUS INFORMATION FOR SCSI CONTROLLER : /dev/fclp0
Generic Status Information
SCSI services internal state = IDLE
Target paths probed = 4
Target paths registered (active/inactive) = 4
LUN paths registered = 8
Trace buffer size = 0
Port name = 0x5001438004c5cef6
Port id = 0x10700
Protocol = fibre_channel
I/F driver version = B.11.31.0909
Firmware version = Z3D2.70X5
Operating negotiated/configured speed = 4Gb
Maximum supported speed = 4Gb
Capability = "Boot Dump"
Type = "Physical"
Number of I/O objects = 1
I/O objects :
Object index = 0, cpu = 7
#[/]scsimgr get_attr -D /dev/fclp0
SCSI ATTRIBUTES FOR CONTROLLER : /dev/fclp0
Generic Attributes :
name = state
current = IDLE
default =
saved =
name = protocol
current = fibre_channel
default =
saved =
name = port_id
current = 67328
default =
saved =
name = port_name
current = 0x5001438004c5cef6
default =
saved =
name = driver_name
current = fclp
default =
saved =
name = driver_rev
current = B.11.31.0909
default =
saved =
name = firmware_rev
current = Z3D2.70X5
default =
saved =
name = cur_speed
current = 4Gb
default =
saved =
name = max_speed
current = 4Gb
default =
saved =
name = capability
current = "Boot Dump"
default =
saved =
name = ctlr_type
current = Physical
default =
saved =
name = lpt_cnt
current = 8
default =
saved =
name = tp_cnt
current = 4
default =
saved =
name = device_file
current = /dev/fclp0
default =
saved =
name = class
current = fc
default =
saved =
name = instance
current = 0
default =
saved =
name = hw_path
current = 2/0/4/0/0/0/0
default =
saved =
name = auto_scan_enable
current = true
default = true
saved =
name = max_internal_hipri
current = 4294967295
default = 4294967295
saved =
name = max_lpt_scan
current = 4294967295
default = 4294967295
saved =
--------------------- fcmsutil ---命令正常输出结果
ywgldb#[/]fcmsutil /dev/fcd0
Vendor ID is = 0x1077
Device ID is = 0x2422
PCI Sub-system Vendor ID is = 0x103C
PCI Sub-system ID is = 0x12D6
PCI Mode = PCI-X 133 MHz
ISP Code version = 4.4.4
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x011100
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x500143800422e1a3
N_Port Port World Wide Name = 0x500143800422e1a2
Switch Port World Wide Name = 0x201100051e895ee0
Switch Node World Wide Name = 0x100000051e895ee0
N_Port Symbolic Port Name = ywgldb_fcd0
N_Port Symbolic Node Name = ywgldb_HP-UX_B.11.31
Driver state = ONLINE
Hardware Path is = 1/0/10/1/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) fcd B.11.31.0903 Dec 14 2008
阅读(3568) | 评论(0) | 转发(0) |