Chinaunix首页 | 论坛 | 博客
  • 博客访问: 6550123
  • 博文数量: 1159
  • 博客积分: 12444
  • 博客等级: 上将
  • 技术积分: 12570
  • 用 户 组: 普通用户
  • 注册时间: 2008-03-13 21:34
文章分类

全部博文(1159)

文章存档

2016年(126)

2015年(350)

2014年(56)

2013年(91)

2012年(182)

2011年(193)

2010年(138)

2009年(23)

分类: LINUX

2013-01-30 23:58:04



Thank you for using slax!

Steps to make it bootable from your USB device:

1) Extract the contents of ZIP archive to your USB drive.
   If you are using Windows, you will get for example E:\slax\
   You probably already did this, just make sure you extracted
   the archive to your USB drive and not to your local harddisk.

2) Now navigate to directory /slax/boot/ on your USB drive.
   In Windows, it will be E:\slax\boot\ for example.
   Use explorer or any other file manager for this task.

3) While you're in the boot directory, locate file bootinst.bat
   Run it by doubleclicking it. It will setup your USB to boot.

-- That's it. Your USB device is now ready to boot slax.
-- You can safely delete this file (slax.txt), it's not needed.

阅读(1932) | 评论(0) | 转发(1) |
给主人留下些什么吧!~~