分类：
2010-09-27 09:24:29
关于IBM CATE认证考试科目中的考试，网上有很多考生问能不能提供最新的考题，这里我就首先介绍一下这门考题的相关信息。
考试代号：
认证名称：IBM Blade Center V5
版本号：V8.02
考题数量：45道
更新日期：2010-8-14
现部分题库参考如下：
1.What components are needed to access the internal storage on a BladeCenter S?
A.Optical Pass-Thru Module and one SFF FC adapter per blade
B.One iSCSI adapter per blade
C.SAS Connectivity Module and one SAS expansion card per blade
D.Integrated internal storage adapter
Answer:C
2.A customer using IBM BladeCenter H wants redundant and separate management and production LANs. Which of the following is required to provide redundant connections to separate LANs within the BladeCenter?
A.Four Cisco Systems Fibre Intelligent Gigabit Ethernet switch modules
B.Two Cisco Systems Fibre Intelligent Gigabit Ethernet switch modules and a BladeCenter Gigabit SFF
Ethernet expansion card
C.Two IBM Server Connectivity Modules and an Ethernet expansion card CFFv
D.Four BNT/ Nortel Layer 2-7 GbE switch modules and a BladeCenter Gigabit SFF Ethernet expansion card
Answer:D
3.A customer is installing a Myrinet Cluster Expansion Card in an existing IBM LS21 blade server. Which bay should the Optical Pass-thru Module be placed?
A.1
B.2
C.3
D.4
Answer:D
4.A prospect has an new Director of IT. They are reviewing all servers to reduce the number of operating systems in their IT operations. Which operating system is supported on an LS21 blade?
A.Red Hat Enterprise Linux v.4 Update 4 (AS, ES, WS)
B.Red Hat 9
C.Novell Netware 5.2
D.Microsoft Windows 2000 Professional
Answer:A
5.A customer has an HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure?
A.Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade BIOS to boot from SAN.
B.Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
C.Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN,
install Windows from the CD, and then press F6 when prompted to supply the driver.
D.Configure the blade BIOS to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD.
Answer:C
6.A customer orders three IBM BladeCenter E chassis and thirty-four LS21 blades. The customer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy?
A.6
B.8
C.10
D.12
Answer:C
如需下载更多的cate认证题库，可登陆！
