分类：
2010-08-24 09:18:04
HP CertificationIII考试题库由我们专业IT认证讲师及产品专家精心打造，包括了当前最新的全真试题，全部附有正确答案。题库的覆盖率在96%以上，确保考生能一次通过考试。
网站会根据考试认证厂商对考题的变化而及时更新题库的，确保考生能拿到最新最全的题库。同时，网站承诺“一次不过，全额退款”保证了考生的利益不受到任何损失。
现部分题库分享如下：
1.Which scheme is used in the command line interface for drive and slot numbers in ESL E-Series tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Correct:B
2.Which port number is required when starting a Command View TL session?
A.2301
B.4095
C.4444
D.5555
Correct:B
3.You are performing a firmware upgrade using Command View TL and a Telnet session terminates it prematurely. What is the most likely outcome?
A.The Telnet session is automatically aborted.
B.Telnet automatically aborts the other session, but the upgrade continues.
C.Command View TL takes precedence and continues the firmware upgrade.
D.The firmware upgrade aborts and the device being upgraded may need physical repair.
Correct:D
4.What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Correct:B
5.Which capabilities of a TCP/IP connection are delivered by the Simple Internet Protocol Plus (SIPP)?
A.small packets and ECC
B.error handling and retries
C.increased bandwidth and performance
D.faster command propagation on inexpensive copper interconnect
Correct:B
6.For which connection, other than the cabinet controller, is the I2C network cable used?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Correct:B
如需下载更多的题库，你可以登录！
