ACSE-1 (osi 8650-1)abstract syntax-- Module ACSE-1 (X.227:04/1995)
-- See also
the README file
-- See also the index of all ASN.1 assignments needed in this
document
ACSE-1 {joint-iso-itu-t association-control(2) modules(0)
apdus(0) version1(1)}
-- ACSE-1 refers to ACSE version 1
DEFINITIONS
::=
BEGIN
EXPORTS
acse-as-id, ACSE-apdu, aCSE-id,
Application-context-name, AP-title,
AE-qualifier, AE-title,
AP-invocation-identifier, AE-invocation-identifier,
Mechanism-name,
Authentication-value, ACSE-requirements, ObjectSet;
IMPORTS
Name,
RelativeDistinguishedName
FROM InformationFramework {joint-iso-itu-t
ds(5) module(1)
informationFramework(1) 3};
-- The data types
Name and RelativeDistinguishedName are imported from ISO/IEC 9594-2.
--
object identifier assignments
acse-as-id OBJECT IDENTIFIER ::=
{joint-iso-itu-t association-control(2) abstract-syntax(1) apdus(0)
version1(1)}
-- may be used to reference the abstract syntax of the ACSE
APDUs
aCSE-id OBJECT IDENTIFIER ::=
{joint-iso-itu-t
association-control(2) ase-id(3) acse-ase(1) version(1)}
-- may be used
to identify the Association Control ASE.
-- top level CHOICE
ACSE-apdu
::= CHOICE {
aarq AARQ-apdu,
aare AARE-apdu,
rlrq
RLRQ-apdu,
rlre RLRE-apdu,
abrt ABRT-apdu,
...
}
AARQ-apdu ::= [APPLICATION 0] IMPLICIT SEQUENCE {
protocol-version
[0] IMPLICIT BIT STRING {version1(0)} DEFAULT
{version1},
application-context-name [1]
Application-context-name,
called-AP-title [2] AP-title
OPTIONAL,
called-AE-qualifier [3] AE-qualifier
OPTIONAL,
called-AP-invocation-identifier [4] AP-invocation-identifier
OPTIONAL,
called-AE-invocation-identifier [5] AE-invocation-identifier
OPTIONAL,
calling-AP-title [6] AP-title OPTIONAL,
calling-AE-qualifier [7] AE-qualifier OPTIONAL,
calling-AP-invocation-identifier [8] AP-invocation-identifier OPTIONAL,
calling-AE-invocation-identifier [9] AE-invocation-identifier OPTIONAL,
-- The following field shall not be present if only the Kernel is used.
sender-acse-requirements [10] IMPLICIT ACSE-requirements OPTIONAL,
-- The following field shall only be present if the Authentication functional
unit is selected.
mechanism-name [11] IMPLICIT
Mechanism-name OPTIONAL,
-- The following field shall only be present if
the Authentication functional unit is selected.
calling-authentication-value [12] EXPLICIT Authentication-value
OPTIONAL,
application-context-name-list
[13] IMPLICIT
Application-context-name-list OPTIONAL,
-- The above field shall only be
present if the Application Context Negotiation functional unit is selected
implementation-information [29] IMPLICIT Implementation-data
OPTIONAL,
...,
...,
user-information
[30] IMPLICIT
Association-information OPTIONAL
}
AARE-apdu ::= [APPLICATION 1]
IMPLICIT SEQUENCE {
protocol-version
[0] IMPLICIT BIT STRING
{version1(0)} DEFAULT {version1},
application-context-name [1]
Application-context-name,
result [2]
Associate-result,
result-source-diagnostic [3]
Associate-source-diagnostic,
responding-AP-title [4]
AP-title OPTIONAL,
responding-AE-qualifier [5] AE-qualifier
OPTIONAL,
responding-AP-invocation-identifier [6]
AP-invocation-identifier OPTIONAL,
responding-AE-invocation-identifier
[7] AE-invocation-identifier OPTIONAL,
-- The following field shall not
be present if only the Kernel is used.
responder-acse-requirements
[8] IMPLICIT ACSE-requirements OPTIONAL,
-- The following field shall only
be present if the Authentication functional unit is selected.
mechanism-name [9] IMPLICIT Mechanism-name OPTIONAL,
-- This following field shall only be present if the Authentication functional
unit is selected.
responding-authentication-value
[10] EXPLICIT
Authentication-value OPTIONAL,
application-context-name-list
[11]
IMPLICIT Application-context-name-list OPTIONAL,
-- The above field shall
only be present if the Application Context Negotiation functional unit is
selected
implementation-information
[29] IMPLICIT
Implementation-data OPTIONAL,
...,
...,
user-information
[30] IMPLICIT Association-information OPTIONAL
}
RLRQ-apdu ::=
[APPLICATION 2] IMPLICIT SEQUENCE {
reason [0] IMPLICIT
Release-request-reason OPTIONAL,
...,
...,
user-information [30]
IMPLICIT Association-information OPTIONAL
}
RLRE-apdu ::= [APPLICATION
3] IMPLICIT SEQUENCE {
reason [0] IMPLICIT
Release-response-reason OPTIONAL,
...,
...,
user-information
[30] IMPLICIT Association-information OPTIONAL
}
ABRT-apdu ::=
[APPLICATION 4] IMPLICIT SEQUENCE {
abort-source [0] IMPLICIT
ABRT-source,
abort-diagnostic [1] IMPLICIT ABRT-diagnostic OPTIONAL,
-- This field shall not be present if only the Kernel is used.
...,
...,
user-information [30] IMPLICIT Association-information
OPTIONAL
}
ABRT-diagnostic ::= ENUMERATED {
no-reason-given(1),
protocol-error(2),
authentication-mechanism-name-not-recognized(3),
authentication-mechanism-name-required(4), authentication-failure(5),
authentication-required(6), ...
}
ABRT-source ::= INTEGER
{acse-service-user(0), acse-service-provider(1)
}(0..1,
...)
ACSE-requirements ::= BIT STRING {
authentication(0),
application-context-negotiation(1)}
Application-context-name-list ::=
SEQUENCE OF Application-context-name
Application-context-name ::= OBJECT
IDENTIFIER
-- Application-entity title productions follow (not in
alphabetical order)
AP-title ::= CHOICE {
ap-title-form1
AP-title-form1,
ap-title-form2 AP-title-form2,
...
}
AE-qualifier ::= CHOICE {
ae-qualifier-form1
AE-qualifier-form1,
ae-qualifier-form2 AE-qualifier-form2,
...
}
-- When both AP-title and AE-qualifier data values are present
in an AARQ or AARE APDU, both must
-- have the same form to allow the
construction of an AE-title as discussed in CCITT Rec. X.665 |
-- ISO/IEC
9834-6.
AP-title-form1 ::=
Name
-- The value assigned to
AP-title-form1 is The Directory Name of an application-process
title.
AE-qualifier-form1 ::=
RelativeDistinguishedName
-- The
value assigned to AE-qualifier-form1 is the relative distinguished name of a
particular
-- application-entity of the application-process identified by
AP-title-form1.
AP-title-form2 ::= OBJECT
IDENTIFIER
AE-qualifier-form2 ::= INTEGER
AE-title ::= CHOICE
{
ae-title-form1 AE-title-form1,
ae-title-form2 AE-title-form2,
...
}
-- As defined in CCITT Rec. X.650 | ISO 7498-3, an
application-entity title is composed of an application-
-- process title and
an application-entity qualifier. The ACSE protocol provides for the transfer of
an
-- application-entity title value by the transfer of its component
values. However, the following data type
-- is provided for International
Standards that reference a single syntactic structure for AE
titles.
AE-title-form1 ::=
Name
-- For access to The Directory
(ITU-T Rec. X.500-Series | ISO/IEC 9594), an AE title has AE-title-form1.
--
This value can be constructed from AP-title-form1 and AE-qualifier-form1 values
contained in an
-- AARQ or AARE APDU. A discussion of forming an
AE-title-form1 from AP-title-form1 and AE-qualifier-
-- form1 may be found
in CCITT Rec. X.665 | ISO/IEC 9834-6.
AE-title-form2 ::= OBJECT
IDENTIFIER
-- A discussion of forming an AE-title-form2 from
AP-title-form2 and AE-qualifier-form2 may be
-- found in CCITT Rec. X.665 |
ISO/IEC 9834-6.
AE-invocation-identifier ::=
INTEGER
AP-invocation-identifier ::= INTEGER
-- End of
Application-entity title productions
Associate-result ::= INTEGER {
accepted(0), rejected-permanent(1), rejected-transient(2)}(0..2,
...)
Associate-source-diagnostic ::= CHOICE {
acse-service-user
[1] INTEGER {null(0),
no-reason-given(1),
application-context-name-not-supported(2),
calling-AP-title-not-recognized(3),
calling-AP-invocation-identifier-not-recognized(4),
calling-AE-qualifier-not-recognized(5),
calling-AE-invocation-identifier-not-recognized(6),
called-AP-title-not-recognized(7),
called-AP-invocation-identifier-not-recognized(8),
called-AE-qualifier-not-recognized(9),
called-AE-invocation-identifier-not-recognized(10),
authentication-mechanism-name-not-recognized(11),
authentication-mechanism-name-required(12),
authentication-failure(13),
authentication-required(14)}
(0..14, ...),
acse-service-provider
[2] INTEGER {null(0),
no-reason-given(1),
no-common-acse-version(2)}
(0..2, ...)
}
Association-information ::= SEQUENCE SIZE (1, ..., 0 |
2..MAX) OF EXTERNAL
Authentication-value ::= CHOICE {
charstring
[0] IMPLICIT GraphicString,
bitstring [1] IMPLICIT BIT STRING,
external [2] IMPLICIT EXTERNAL,
other
[3] IMPLICIT SEQUENCE
{other-mechanism-name
MECHANISM-NAME.&id({ObjectSet}),
other-mechanism-value
MECHANISM-NAME.&Type
({ObjectSet}{@.other-mechanism-name})}
}
-- The abstract syntax of
(calling/responding) authentication-value is determined by the
authentication
-- mechanism used during association establishment. The
authentication mechanism is either explicitly
-- denoted by the &id
field (of type OBJECT IDENTIFIER) for a mechanism belonging to the class
--
MECHANISM-NAME, or it is known implicitly by
-- prior agreement between the
communicating partners. If the "other" component is chosen, then
-- the
"mechanism-name" component must be present in accordance with
-- ITU-T Rec.
X.680 | ISO/IEC 8824. If the value "mechanism-name" occurs in the AARQ-apdu or
the
-- AARE-apdu, then that value must be the same as the value for
"other-mechanism-name"
Implementation-data ::=
GraphicString
Mechanism-name ::= OBJECT IDENTIFIER
MECHANISM-NAME
::= TYPE-IDENTIFIER
ObjectSet MECHANISM-NAME ::=
{...}
Release-request-reason ::= INTEGER {normal(0), urgent(1),
user-defined(30)
}(0 | 1 | 30, ...)
Release-response-reason ::=
INTEGER {
normal(0), not-finished(1), user-defined(30)}(0 | 1 | 30,
...)
END
阅读(1960) | 评论(0) | 转发(0) |