Chinaunix首页 | 论坛 | 博客
  • 博客访问: 1920002
  • 博文数量: 261
  • 博客积分: 8073
  • 博客等级: 中将
  • 技术积分: 2363
  • 用 户 组: 普通用户
  • 注册时间: 2006-04-10 15:23
文章分类

全部博文(261)

文章存档

2013年(1)

2012年(1)

2011年(50)

2010年(34)

2009年(4)

2008年(17)

2007年(55)

2006年(99)

分类:

2007-03-21 21:34:40

   晚上移植YAFFS2,添加到内核编译通过,制作yaffs2工具也成功,将内核和映象下载到板子上启动,出现如
 
下错误
 
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-i2c s3c2410-i2c: slave address 0x10
s3c2410-i2c s3c2410-i2c: bus frequency set to 390 KHz
s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
TCP cubic registered
NET: Registered protocol family 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
yaffs: dev is 32505859 name is "mtdblock3"
yaffs: Attempting MTD mount on 31.3, "mtdblock3"
block 248 is bad
block 249 is bad
block 250 is bad
block 251 is bad
block 252 is bad
block 253 is bad
block 255 is bad
block 256 is bad
VFS: Mounted root (yaffs filesystem).
Freeing init memory: 120K
Warning: unable to open an initial console.
Failed to execute /linuxrc.  Attempting defaults...
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
 本以为是内核配置或者需要打yaffs2的补丁,后来猛然想起下载yaffs2映象用vivi原始的laod命令是不可
 
以的,需要专门下载yaffs2命令,故使用上带loadyaffs命令的vivi。
阅读(2740) | 评论(0) | 转发(0) |
0

上一篇:不要浮躁!

下一篇:CS8900 移植 linux-2.6.20.3

给主人留下些什么吧!~~