分类：
2007-03-21 13:04:09
| Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00400000 ... done zImage magic = 0x016f2818 Setup linux parameters at 0x30000100 linux command line is: "noinitrd root=31：03 init=/linuxrc console=ttySAC0" MACH_TYPE = 193 NOW, Booting Linux...... Uncompressing Linux............................................................................................... done, booting the kernel. Linux version 2.6.20.3 (root@debian) (gcc version 3.4.1) #10 Thu Mar 15 19:35:16 CST 2007 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 Machine: SMDK2410 ATAG_INITRD is deprecated; please update your bootloader. Memory policy: ECC disabled, Data cache writeback CPU S3C2410A (id 0x32410002) S3C2410: core 202.800 MHz, memory 101.400 MHz, peripheral 50.700 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Built 1 zonelists. Total pages: 16256 Kernel command line: noinitrd root=/dev/mtdblock3 init=linuxrc console=ttySAC0 irq: clearing pending ext status 00000100 irq: clearing subpending status 00000003 irq: clearing subpending status 00000002 PID hash table entries: 256 (order: 8, 1024 bytes) timer tcon=00000000, tcnt a509, tcfg 00000200,00000000, usec 00001e4c Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61824KB available (2664K code, 314K data, 120K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics Registering sysclass DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 NET: Registered protocol family 16 S3C2410 Power Management, (c) 2004 Simtec Electronics S3C2410: Initialising architecture kobject_add failed for s3c2410-nand with -EEXIST, don't try to register things with the same name in the same directory. s3c24xx: failed to add board device s3c2410-nand (-17) @c02c7370 0: xdreq0, channels 0--- 1: xdreq1, channels -1-- 2: sdi, channels 0-23 3: spi0, channels -1-- 4: spi1, channels ---3 5: uart0, channels 0--- 6: uart1, channels -1-- 7: uart2, channels ---3 8: timer, channels 0-23 9: i2s-sdi, channels -12- 10: i2s-sdo, channels --2- 11: 12: 13: 14: usb-ep1, channels 0--- 15: usb-ep2, channels -1-- 16: usb-ep3, channels --2- 17: usb-ep4, channels ---3 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 2048 bind 1024) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered s3c2410-lcd s3c2410-lcd: no platform data for lcd, cannot attach s3c2410-lcd: probe of s3c2410-lcd failed with error -22 lp: driver loaded but no devices found ppdev: user-space parallel port driver S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410 s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410 s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) dm9000 Ethernet Driver Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx BAST NOR-Flash Driver, (c) 2004 Simtec Electronics S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2410-nand s3c2410-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) NAND_ECC_NONE selected by board driver. This is not recommended !! Scanning device for bad blocks Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00004000 : "Boot Agent" 0x00000000-0x00200000 : "S3C2410 flash partition 1" 0x00400000-0x00800000 : "S3C2410 flash partition 2" 0x00800000-0x00a00000 : "S3C2410 flash partition 3" 0x00a00000-0x00e00000 : "S3C2410 flash partition 4" 0x00e00000-0x01800000 : "S3C2410 flash partition 5" 0x01800000-0x03000000 : "S3C2410 flash partition 6" 0x03000000-0x04000000 : "S3C2410 flash partition 7" usbmon: debugfs is not available s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-i2c s3c2410-i2c: slave address 0x10 s3c2410-i2c s3c2410-i2c: bus frequency set to 99 KHz s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter TCP cubic registered NET: Registered protocol family 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) No filesystem could mount root, tried: ext3 cramfs msdos vfat romfs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3) |
