一、MP3blaster(文本mp3播放器)
￥￥￥￥￥￥ ￥￥￥ 用了，挺好的 ￥￥￥￥￥￥￥￥￥￥￥￥
1. Introduction
-------------------------
MP3Blaster is a text console based program for playing mainly mp3 audio
files. It is very interactive, and has a great list of features. Its
playlist can be divided in albums or categories (called 'groups'), which
allows for very sophisticated playback orders.
2. Prerequisites
-------------------------
- One of the following Operating Systems is currently supported:
FreeBSD, Linux, NetBSD, OpenBSD.
It should be trivial to port MP3Blaster to other UNIX-like
Operating Systems.
- A soundcard. Although 8-bit soundcards, and those that are limited
to 22 Khz playback will work, a 44Khz capable 16 bits soundcard
(as all new cards are) is recommended.
- Threads. Most Operating Systems have a pthreads implementation. If
yours doesn't, you can use libpth instead (see section Links for
the URL) by conifuring with an extra flag '--with-pth'.
3. Installation
-------------------------
If you're eager to start, this will do:
./configure
make
make install
Run './configure --help' to get a list of compile-time options.
There are a few important options that can have an impact on the
quality of audio-playback and CPU usage on your system. These are:
--enable-newthreads (auto-enables --with-pth)
This will use an alternative playback buffering system. It
might work better than the conventional buffering system on many
systems. Please give it a try if you're experiencing skips
during sound playback. Mail problems / successes.
--with-pth (without --enable-newthreads)
Uses libpth instead of the OS-specific pthreads implementation.
This might reduce CPU-overhead and improve sound playback.
Please try this and reports problems / successes.
If you don't supply any of the above mentioned flags, the
OS-specific pthreads implementation will be used, with default
buffering mechanism. On FreeBSD no buffering will be used by default
since it will probably hog your CPU or simply hang. using libpth on
Free(/Net/Open)BSD is therefor recommended.
4. Usage
-------------------------
Read the MP3Blaster manpage (man mp3blaster or man -lmp3blaster.1 from
source) for information about commandline parameters, config files,
usage, etc. Read the next section for some examples
5. Examples
-------------------------
MP3Blaster's defaults should be good for most systems. Most keybindings
can be reconfigured easily using a config file.
A simple way to play a lot of mp3's from the command line in random
order:
mp3blaster -p allrandom /my/mp3s/*.mp3
Load a playlist and start playing immediately:
mp3blaster -a /my/playlists/coolsongs.lst
Use mp3blaster with an old, 8 bit soundcard that can do 22Khz sampling:
mp3blaster -28
6. Configuration
-------------------------
For an example configuration file, see or copy doc/sample.mp3blasterrc*
to ~/.mp3blasterrc and modify to tastes. The man page has information on
all available settings possible in the file.
二、flash播放器（没啥可说的，安了直接用）
三、RealonePlayerGoden(没啥可说的，安了直接用))
四、xmms
套件：libmac-3.99.u4-alt2.i586.rpm xmms-mp3-1.2.8-3.p.i386.rpm
xmms-1.2.8-1.i386.rpm xmms-skins-1.2.8-1.i386.rpm
xmms-in-mac-0.2.1-alt2.i586.rpm xmms-wma-1.0.3-1.i386.rpm
安装: $su
#rpm -ivh --force *.rpm
使用：$xmms(弹出界面)
阅读(1249) | 评论(0) | 转发(0) |
