几点说明：
1．Oracle 官方安装文档中（下文中的doc 2，doc 3），有多处错误。最新的 Release Notes （August 2006）
更正了一些，但还有不少未得到更正。
2．文中的三个脚本，在使用之前请仔阅读。如不当使用导致系统损坏与本文作者无关。
3．本文所用的安装步骤尽可能依照Oracle 的官方安装文档。但有一处“Configuring UDP parameters” 不得不改用其他
方法，因为 Oracle 官方安装文档中讲的方法不起作用。
Part1 Do the Pre-installation Tasks
This is a guide for installing Oracle 10g RAC with Oracle clusterware on Solaris9 SPARC 64-Bit
Enterprise Edition.
Followed intrusions in these doc:
1. Oracle Database Release Notes
10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit) Part Number B15689-03
2. Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for Solaris Operating System Part Number B14205-06
3. Oracle Database Installation Guide
10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit) Part Number B15690-02
The Hardware:
Two Ultra-2 Enterprise servers. cpu:300MHz x 2, memory:1024mb. storage:Sun A1010 disk array
A Sun fiber channel host adapter(X1057A) is installed on each node to connect to the A1010
with a fiber cable. A Sun multi-pack is connected to one of the Ultra-2 servers.
A 10BT network card is installed on each node for the private network.
A crossover network cable connects the two 10BT network cards.
(Oracle10 does not support the crossover network cable, according to doc 2)
A SBUS Frame Buffer (X359A) is installed on both nodes.
Because the hardware is barely meet the requirement, it is only good for testing.
The OS:
Install Solaris9 4/04(64-Bit) on both nodes, and install the latest patch cluster.
Configure Tcpwrappers and NTP the two nodes. Solaris9 includes these two packages.
Install openssh-4.3p2-sol9-sparc-local on the two nodes.
Secure and harden the systems by following some procedures in the doc
SANS Solaris Security Step by Step Version 2.0:
The Media for Installation:
Oracle Database 10g Release2 10.2.0.1.0 for Solaris SPARC 64-bit Enterprise Edition
If possible, download 10.2.0.2 and up, so you will install less patches afterwards.
I have to copy the two DVDs to local hard disks, since the Ultra-2 does not have a DVD drive.
You might want to configure a NFS server on node1 and an auto client on node2,
so you can run the Cluster Verification Utility on node2 as well.
The steps of the installation/configuration:
1. Do the pre-installation tasks
2. Install Oracle clusterweare
3. Test/verify the clusterware
4. Install Oracle Database software only with RAC.
5. Configure ASM and make sure it is running on both nodes.
6. Create a RAC database with DBCA.
Disk & shared storage configuration:
----------------------------------------------------------------------------------------------------------
packages required real type mount point partition
----------------------------------------------------------------------------------------------------------
DB software 4GB 4GB UFS /u01/app/oracle c0t1d0s0 (not shared)
DB datafiles 1.2GB 12GB ASM c3t0d2s7,c3t1d2s7,c3t3d2s7
OCR 100MB 128MB raw c3t0d4s6,c3t2d4s6,c3t4d4s6
Voting disk 20MB 32MB raw c3t0d4s7,c3t2d4s7,c3t4d4s7
swap 400MB 1GB c0t0d0s1
----------------------------------------------------------------------------------------------------------
The clusterware will be installed in it's own home directory on node1.
The redundancy level of OCR and voting disk will be "normal".
Because this is for testing only, no space allocated for flash recovery and log archiving.
阅读(1472) | 评论(0) | 转发(0) |
