我用的是wine0.9.47，下载wine-0.9.47.tar.zip
用wineinstall安装：用普通用户登录，解压wine-0.9.10.tar.zip，解压后的目录就是原码
字体包，进入该目录。运行：./tools/wineinstall按提示回答就可以了。
即：1。 su yhcgh (以普通用户yhcgh运行）
2.。 unzip wine-0.9.47.tar.zip -d /home/yhcgh/wine/(解压目录）
3。 cd \home\yhcgh\wine
4。 tar jxvf wine-0.9.47.tar.bz2
5。 cd wine-0.9.47
6。 cd tools
7。 ./wineinstall(安装释放文件）
8。 之后它会运行./configure，然后显示：We need to install wine as root user, do you want us to build wine,'su root' and install Wine? Enter 'no' to continue without installing(yes/no)
yes 回车
如果在此处出现错误，请检查此命令的输出，如果他没有找到一些需要的包，而你又希望使用那个包提供的功能时，请
字体相应的 devel 包。
如果你root用户设置了密码，还会提示你输入密码。
待屏幕上出现：
Installation complete for now. Good luck (this is still alpha software).
If you have problems with WINE, please read the documentation first,
as many kinds of potential problems are explained there.
则表示
字体成功了。
在shell下运行wine，第一次运行不成功，这是正常,因为没有在/root/.wine/config文件里配置好.找到这些吧。
[Drive C]
"Path" = "/usr/share/win_c"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
改为:[Drive C]
"Path" = "/winc"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
就可以了，如果你字体了simsun字体.wine默认就会找到这个字体的，下边就是我的/root/.wine/config。
WINE REGISTRY Version 2
;; All keys relative to MachineSoftwareWineWineConfig
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device
