So... your shiny MySQL database is no longer running and you want to fix it?
You've come to the right place!
I've assembled a list of 7 ways to fix your MySQL database when a simple
restart doesn't do the trick, or when you have corrupt tables.
Simple MySQL restart:
/usr/local/mysql/bin/mysqladmin -uUSERNAME -pPASSWORD shutdown
/usr/local/mysql/bin/mysqld_safe &
1. Corrupt MyISAM tables
MySQL database allows you to define a different
for different tables. The storage engine is the engine used to store
and retrieve data. Most popular storage engines are MyISAM and InnoDB.
MyISAM tables -will- get corrupted eventually. This is a fact of life.
Luckily, in most cases, MyISAM table corruption is easy to fix.
To fix a single table, connect to your MySQL database and issue a:
repair TABLENAME
To fix everything, go with:
/usr/local/mysql/bin/mysqlcheck --all-databases -uUSERNAME -pPASSWORD -r
A lot of times, MyISAM tables will get corrupt and you won't even know about it unless you review the log files.
I highly suggest you add this line to your /etc/my.cnf config file. It will automatically fix MyISAM tables as soon as they become corrupt:
[mysqld]
myisam-recover=backup,force
If this doesn't help, there are a few you can try.
2. Multiple instances of MySQL
This is pretty common. You restart MySQL and the process immediately dies.
Reviewing the log files will tell you another instance of MySQL may be running.
To stop all instances of MySQL:
/usr/local/mysql/bin/mysqladmin -uUSERNAME -pPASSWORD shutdown
killall mysql
killall mysqld
Now you can restart the database and you will have a single running instance
3. Changed InnoDB log settings
Once you have a running InnoDB MySQL database, you should never ever change these lines in your /etc/my.cnf file:
datadir = /usr/local/mysql/data
innodb_data_home_dir = /usr/local/mysql/data
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = /usr/local/mysql/data
innodb_log_files_in_group = 2
innodb_log_file_size = 5242880
InnoDB log file size cannot be changed once it has been established. If you change it, the database will refuse to start.
4. Disappearing MySQL host tables
I've seen this happen a few times. Probably some kind of freakish MyISAM bug.
Easily fixed with:
/usr/local/bin/mysql_install_db
5. MyISAM bad auto_increment
If the auto_increment count goes haywire on a MyISAM table, you will no longer be able to INSERT new records into that table.
You can typically tell the auto_increment counter is malfunctioning, by
seeing an auto_increment of -1 assigned to the last inserted record.
To fix - find the last valid auto_increment id by issuing something like:
SELECT max(id) from tablename
And then update the auto_increment counter for that table
ALTER TABLE tablename AUTO_INCREMENT = id+1
6. Too many connections
Your database is getting hit with more connections than it can handle and now you cannot even connect to the database yourself.
First, stop the database:
/usr/local/mysql/bin/mysqladmin -uUSERNAME -pPASSWORD shutdown
If that doesn't help you can try "killall mysql" and "killall mysqld"
Once the database stopped, edit your /etc/my.cnf file and increase the
number of connections. Don't go crazy with this number or you'll bring
your entire machine down.
On a dedicated database machine we typically use:
max_connections = 200
wait_timeout = 100
Try restarting the database and see if that helps.
If you're getting bombarded with queries and you need to be able to
connect to the database to make some table changes, set a different port
number in your /etc/my.cnf file, start the database, make any changes,
then update the port back to normal (master-port = 3306) and restart.
7. Corrupt InnoDB tables
InnoDB tables are my favorite. Transactional, reliable and unlike
MyISAM, InnoDB supports concurrent writes into the same table.
InnoDB's internal recovery mechanism is pretty good. If the database
crashes, InnoDB will attempt to fix everything by running the log file
from the last timestamp. In most cases it will succeed and the entire
process is transparent.
Unfortunately if InnoDB fails to repair itself, the -entire- database
will not start. MySQL will exit with an error message and your entire
database will be offline. You can try to restart the database again and
again, but if the repair process fails - the database will refuse to
start.
This is one reason why you should always run a master/master setup when
using InnoDB - have a redundant master if one fails to start.
Before you go any further, review MySQL log file and confirm the database is not starting due to InnoDB corruption.
There are tricks to update InnoDB's internal log counter so that it
skips the queries causing the crash, but in our experience this is not a
good idea. You lose data consistency and will often break replication.
Once you have corrupt InnoDB tables that are preventing your database from starting, you should follow this five step process:
Step 1: Add this line to your /etc/my.cnf configuration file:
[mysqld]
innodb_force_recovery = 4
Step 2: Restart MySQL. Your database will now start, but with innodb_force_recovery, all INSERTs and UPDATEs will be ignored.
Step 3: Dump all tables
Step 4: Shutdown database and delete the data directory. Run mysql_install_db to create MySQL default tables
Step 5: Remove the innodb_force_recovery line from your /etc/my.cnf file
and restart the database. (It should start normally now)
Step 6: Restore everything from your backup
Recently I was faced with the daunting task of
reparing an InnoDB database gone bad. The database would not start due
to corruption.
First step was turning-on InnoDB force-recovery mode, where InnoDB starts but ignores all UPDATEs and INSERTs.
Add this line to /etc/my.cnf:
innodb_force_recovery = 2
Now we can restart the database:
/usr/local/bin/mysqld_safe &
(Note: If MySQL doesn't restart, keep increasing the innodb_force_recovery number until you get to innodb_force_recovery = 8)
Save all data into a temporary alldb.sql (this next command can take a while to finish):
mysqldump --force --compress --triggers --routines --create-options -uUSERNAME -pPASSWORD --all-databases > /usr/alldb.sql
Shutdown the database again:
mysqladmin -uUSERNAME -pPASSWORD shutdown
Delete the database directory. (Note: In my case the data was under
/usr/local/var. Your setup may be different. Make sure you're deleting
the correct directory)
rm -fdr /usr/local/var
Recreate the database directory and install MySQL basic tables
mkdir /usr/local/var
chown -R mysql:mysql /usr/local/var
/usr/local/bin/mysql_install_db
chown -R mysql:mysql /usr/local/var
Remove innodb_force_recovery from /etc/my.cnf and restart database:
/usr/local/bin/mysqld_safe &
Import all the data back (this next command can take a while to finish):
mysql -uroot --compress < /usr/alldb.sql
And finally - flush MySQL privileges (because we're also updating the MySQL table)
/usr/local/bin/mysqladmin -uroot flush-privileges
-
Note: For best results, add port=8819 (or any other random number) to
/etc/my.cnf before restarting MySQL and then add --port=8819 to the
mysqldump command. This way you avoid the MySQL database getting hit
with queries while the repair is in progress.
详情参看：
