Configuring and Unconfiguring a DHCP Server Using

>> >> >> >> Configuring and Unconfiguring a DHCP Server Using DHCP Manager

上一页:

Configuring and Unconfiguring a DHCP Server Using DHCP Manager

This section includes procedures to help you configure and unconfigure a DHCP server with DHCP Manager. Note that you must be running an X Window system such as CDE or GNOME to use DHCP Manager.

DHCP Manager can be run as superuser with the /usr/sadm/admin/bin/dhcpmgr command. See for general information about the utility. See for more detailed information about running DHCP Manager.

When you run DHCP Manager on a server that is not configured for DHCP, the following screen is displayed. You can specify whether you want to configure a DHCP server or a BOOTP relay agent.

Figure 14–1 Choose Server Configuration Dialog Box in DHCP Manager

Configuring DHCP Servers

When you configure a DHCP server, DHCP Manager starts the DHCP Configuration Wizard, which prompts you for information that is needed to configure the server. The initial screen of the wizard is shown in the following figure.

Figure 14–2 DHCP Configuration Wizard's Initial Screen

When you finish answering the wizard prompts, DHCP Manager creates the items that are listed in the following table.

Table 14–1 Items Created During DHCP Server Configuration

Item	Description	Contents
Service configuration file, /etc/inet/dhcpsvc.conf	Records keywords and values for server configuration options.	Data store type and location, and options that are used with in.dhcpd to start the DHCP daemon when the system boots. Do not edit this file manually. You must use dhcpmgr or dhcpconfig to modify DHCP configuration information.
dhcptab table	DHCP Manager creates a dhcptab table if the table does not already exist.	Macros and options with assigned values.
Locale macro (optional), which is named Locale	Contains the local time zone's offset in seconds from Universal time (UTC).	UTCoffst option with assigned number of seconds.
Server macro, which is named to match the server's node name	Contains options whose values are determined by input from the administrator who configured the DHCP server. Options apply to all clients that use addresses owned by the server.	The Locale macro, plus the following options: Timeserv, set to point to the server's primary IP address. LeaseTim, set to the number of seconds for the leases. LeaseNeg, if you selected negotiable leases. DNSdmain and DNSserv, if DNS is configured. Hostname, which must not be assigned a value. The presence of this option indicates that the host name must be obtained from the name service.
Network address macro, whose name is the same as the network address of client's network	Contains options whose values are determined by input from the administrator who configured the DHCP server. Options apply to all clients that reside on the network specified by the macro name.	The following options: Subnet, set to the subnet mask for the local subnet Router, set to the IP address of a router, or RDiscvyF, to cause the client to use router discovery Broadcst, set to the broadcast IP address. This option is present only if the network is not a Point-to-Point network. MTU , for the maximum transmission unit NISdmain and NISservs, if NIS is configured NIS+dom and NIS+serv, if NIS+ is configured
Network table for the network	An empty table is created until you create IP addresses for the network.	No content until you add IP addresses.

How to Configure a DHCP Server (DHCP Manager)

Before You Begin

Make sure that you have read before you configure your DHCP server. In particular, you should use the guidelines in to help you perform the following tasks:

• Select the system that you want to use as a DHCP server.

• Make decisions about your data store, lease policy, and router information.

1. Become superuser on the server system.

2. Start DHCP Manager.

   
   

   #/usr/sadm/admin/bin/dhcpmgr &
   

3. Choose the option Configure as DHCP Server.

   The DHCP Configuration Wizard starts, to help you configure your server.

4. Select options, or type requested information, based on the decisions you made in the planning phase.

   If you have difficulty, click Help in the wizard window to open your web browser and display help for the DHCP Configuration Wizard.

5. Click Finish to complete the server configuration when you have finished specifying the requested information.

6. At the Start Address Wizard prompt, click Yes to configure IP addresses for the server.

   The Add Addresses to Network wizard enables you to specify which addresses to place under the control of DHCP.

7. Answer the prompts according to decisions you made in the planning phase.

   See for more information. If you have difficulty, click Help in the wizard window to open your web browser and display help for the Add Addresses to Network wizard.

8. Review your selections, and then click Finish to add the IP addresses to the network table.

   The network table is updated with records for each address in the range you specified.

See Also

You can add more networks to the DHCP server with the Network Wizard, as explained in .

Configuring BOOTP Relay Agents

When you configure a BOOTP relay agent, DHCP Manager takes the following actions:

• Prompts you for the IP address for one or more DHCP servers to which requests should be relayed

• Stores settings needed for BOOTP relay service

The following figure shows the screen displayed when you choose to configure a BOOTP relay agent.

Figure 14–3 Configure BOOTP Relay Dialog Box in DHCP Manager

How to Configure a BOOTP Relay Agent (DHCP Manager)

Before You Begin

Make sure that you have read before you configure your BOOTP relay agent. In particular, you should see for help in selecting the system to use.

1. Become superuser on the server system.

2. Start the DHCP Manager.

   
   

   #/usr/sadm/admin/bin/dhcpmgr &
   

   If the system has not been configured as a DHCP server or BOOTP relay agent, the DHCP Configuration Wizard starts. If the system has already been configured as a DHCP server, you must first unconfigure the server. See .

3. Select Configure as BOOTP Relay.

   The Configure BOOTP Relay dialog box opens.

4. Type the IP address or host name of one or more DHCP servers, and click Add.

   The specified DHCP servers must be configured to handle BOOTP or DHCP requests received by this BOOTP relay agent.

5. Click OK to exit the dialog box.

   Notice that DHCP Manager offers only the File menu to exit the application and the Service menu to manage the server. The disabled menu options are useful only on a DHCP server.

Unconfiguring DHCP Servers and BOOTP Relay Agents

When you unconfigure a DHCP server or a BOOTP relay agent, DHCP Manager takes the following actions:

• Stops the DHCP daemon (in.dhpcd) process

• Removes the /etc/inet/dhcpsvc.conf file, which records information about daemon startup and the data store location

The following figure shows the screen that is displayed when you choose to unconfigure a DHCP server.

Figure 14–4 Unconfigure Service Dialog Box in DHCP Manager

DHCP Data on an Unconfigured Server

When you unconfigure a DHCP server, you must decide what to do with the dhcptab table and the DHCP network tables. If the data is shared among servers, you should not remove the dhcptab and DHCP network tables. If the tables are removed, DHCP would become unusable across your network. Data can be shared through NIS+ or on exported local file systems. The file /etc/inet/dhcpsvc.conf records the data store used and its location.

You can unconfigure a DHCP server but leave the data intact by not selecting any of the options to remove data. If you unconfigure the server and leave the data intact, you disable the DHCP server.

If you want another DHCP server to take ownership of the IP addresses, you must move the DHCP data to the other DHCP server. You must move the data before you unconfigure the current server. See for more information.

If you are certain you want to remove the data, you can select an option to remove the dhcptab and network tables. If you had generated client names for the DHCP addresses, you can also elect to remove those entries from the hosts table. Client name entries can be removed from DNS, /etc/inet/hosts, or NIS+.

Before you unconfigure a BOOTP relay agent, be sure that no clients rely on this agent to forward requests to a DHCP server.

How to Unconfigure a DHCP Server or a BOOTP Relay Agent (DHCP Manager)

1. Become superuser.

2. Start DHCP Manager.

   
   

   #/usr/sadm/admin/bin/dhcpmgr &
   

3. From the Service menu, choose Unconfigure.

   The Unconfigure Service dialog box is displayed. If the server is a BOOTP relay agent, the dialog box enables you to confirm your intention to unconfigure the relay agent. If the server is a DHCP server, you must decide what to do with the DHCP data and make selections in the dialog box. See .

4. (Optional) Select options to remove data.

   If the server uses shared data through NIS+ or in files shared through NFS, do not select any options to remove the data. If the server does not use shared data, select one option or both options to remove the data.

   See for more information about removing data.

5. Click OK to unconfigure the server.

   The Unconfigure Service dialog box and DHCP Manager are closed.

下一页: