16 Linux Server Monitoring Commands You Really Need To Know

Want to know what's really going on with your server? Then you need to know these essential commands. Once you've mastered them, you'll be well on your way to being an expert Linux system administrator.

Depending on the Linux distribution, you can run pull up much of the information that these shell commands can give you from a GUI program. , for example, has an excellent, graphical configuration and management tool, , and 's is also excellent.

However, it's a Linux administrator truism that you should run a GUI on a server only when you absolutely must. That's because Linux GUIs take up system resources that could be better used elsewhere. So, while using a GUI program is fine for basic server health checkups, if you want to know what's really happening, turn off the GUI and use these tools from the Linux command shell.

This also means that you should only start a GUI on a server when it's required; don’t leave it running. For optimum performance, a Linux server should run at runlevel 3, which fully supports networking and multiple users but doesn't start the GUI when the machine boots. If you really need a graphical desktop, you can always get one by running startx from a shell prompt.

If your server starts by booting into a graphical desktop, you need to change this. To do so, head to a terminal window, su to the root user, and use your favorite editor on /etc/inittab.

Once there, find the initdefault line and change it from id:5:initdefault: to id:3:initdefault:

If there is no inittab file, create it, and add the id:3 line. Save and exit. The next time you boot into your server it will boot into runlevel 3. If you don't want to reboot after this change, you can also set your server's run level immediately with the command: init 3

Once your server is running at init 3, you can start using the following shell programs to see what's happening inside your server.

iostat

The command shows in detail what your storage subsystem is up to. You usually use iostat to monitor how well your storage sub-systems are working in general and to spot slow input/output problems before your clients notice that the server is running slowly. Trust me, you want to spot these problems before your users do!

meminfo and free

gives you a detailed list of what's going on in memory. Typically you access meminfo's data by using another program such as cat or grep. For example,

cat /proc/meminfo

gives you the details of what's going on in your server’s memory at any given moment.

For a quick “just the facts” look at memory, you can use the free command. In short, free gives you the overview; meminfo gives you the details.

mpstat

The command reports on the activities of each of the available CPUs on a multi-processor server. These days, thanks to , that’s almost all servers. mpstat also reports on the average activities of all your server's CPUs. It enables you to display overall CPU statistics per system or per processor. This overview can alert you to possible application problems before they get to the point of annoying users.

netstat

, like ps, is a Linux tool that administrators use every day. It displays a lot of network related information, such as socket usage, routing, interface, protocol, network statistics, and more. Some of the most commonly used options are:

-a Show all socket information

-r Show routing information

-i Show network interface statistics

-s Show network protocol statistics

nmon

, short for Nigel's Monitor, is a popular tool to monitor Linux systems performance. Nmon watches the performance information for several subsystems, such as processor utilization, memory utilization, run queue information, disk I/O statistics, network I/O statistics, paging activity, and process metrics. You can then view nmon's real-time system measurements via its curses “graphical” interface.

To run nmon, you start the tool from the shell. Once up, you select the subsystems to monitor by typing in its one-key commands. For example, to get CPU, memory, and disk statistics, you type c, m, and d. You can also use nmon with the -f flag to save performance statistics to a CSV file for later analysis.

For day to day server monitoring I find nmon to be the single most useful program in my Linux system management tool-kit.

pmap

The command reports the amount of memory that your server's processes are using. You can use this tool to determine which processes on the server are being allocated memory and whether any of these processes are being piggy with RAM.

ps and pstree

The and commands are two of the Linux administrator’s best friends. They both provide a list of all currently running processes. Ps tells you how much memory and processor time the server’s programs are using. Pstree shows less information, but highlights which processes are the children of other processes. Armed with this information, you can spot out–of-control processes and kill them off with Linux's “take no prisoners” command.

sar

The program is a Swiss-army knife of a system monitoring tool. The sar command is actually made up of three programs: sar, which displays the data, and sa1 and sa2, which collect and store it. Once installed, sar creates a detailed overview of CPU utilization, memory paging, network I/O and transfer statistics, process creation activity, and storage device activity. The big difference between sar and nmon is that the former is better at long-term system monitoring, while I find nmon to be better at giving me a quick read on my server's status.

strace

is often thought of a programmer's debugging tool, but it's more than that. It intercepts and records the system calls that are called by a process. This makes it a useful diagnostic, instructional, and debugging tool. For example, you can use strace to find out which configuration file a program is actually using when it starts up.

Strace does have one flaw though. When it's checking out a specific process, that process' performance will fall through the floor. Thus, I only use strace when I already have a darned good reason to think that that program is causing trouble.

tcpdump

is a simple, robust network monitoring utility. Its basic protocol analyzing capability enables you to get a rough view of . To really dig into what's going on with your network however, you'll want to use (see below).

top

The top command shows what's going on with your active processes. By default, it displays the most CPU-intensive tasks running on the server and updates the list every five seconds. You can sort the processes by PID (Process ID); age, newest first; time, by cumulative time; and resident memory usage and total time it's been using the CPU since startup. I find this a fast and easy way to see if any process is starting to go out of control and about to get into trouble.

uptime

Use to see how long the server has been running and how many users are logged on. It also gives you an overview of the average server load. The optimal value of the load is 1 or less, which means that each process has immediate access to the CPU and there are no CPU cycles lost.

vmstat

For the most part, you use to monitor what's going on with virtual memory. Linux constantly uses virtual memory to get the best possible storage performance.

If your applications are taking up too much memory you get excessive page-outs — programs moving from RAM to your system's swap space, which is on the hard drive. Your server can reach a point where it's spending more time managing memory paging than running your applications, a condition called thrashing. When your computer is thrashing, its performance falls through the floor. Vmstat, which can display either average data or actual samples, can help you spot memory pig programs and processes before they bring your server to a crawl.

Wireshark

, formerly known as Ethereal (and still often referred to that way), is tcpdump's big brother, though it is more sophisticated and with far more advanced protocol analyzing and reporting. Wireshark has both a GUI interface and a shell interface. If you do any serious network administration, you must use ethereal. And, if you're using Wireshark/ethereal, I highly recommend Chris Sander's , a great book on how to get the most out of this useful program.

This has only been a 10,000 foot overview of some of Linux's most valuable system monitoring programs. Still, if you can master these programs you'll be well on your way to being a top Linux system administrator.