Chinaunix首页 | 论坛 | 博客
  • 博客访问: 69060
  • 博文数量: 17
  • 博客积分: 1461
  • 博客等级: 上尉
  • 技术积分: 163
  • 用 户 组: 普通用户
  • 注册时间: 2008-03-05 13:31
文章分类

全部博文(17)

文章存档

2011年(1)

2010年(16)

分类: WINDOWS

2010-05-27 11:05:06

    今天一个朋友拿来一个笔记本,联想昭阳E280S,要我给重装系统,开机设置光盘启动,放入ghost XP的盘,选择安装到第一个分区!,居然不好使,而且没反映,死在那里了,而且不管选择那个菜单,都不好使,我就奇怪了~刚开始以为是这个本子对ghost的支持不好,换了一张安装版的xp盘后,居然还是这个现象,还是不好使.狂郁闷!
    最后的最后,在网上搜索了一下,发现是主板BIOS选项里Advanced菜单下面第一项USB BIOS Legacy设置问题.
    官方的解释如下:

For your USB keyboard or mouse to work with MS-DOS-based utilities and non-Windows* modes, your computer must have USB Legacy Support enabled in the BIOS. USB Legacy Support allows the BIOS to interact with a USB keyboard, and in limited cases, a USB mouse.

Symptoms if USB Legacy Support is Disabled
If USB Legacy Support is disabled in the BIOS, you will not be able to use your USB mouse or keyboard in any of the following situations:

  • Running your computer in Safe mode.
  • Using a Windows Startup menu.
  • Starting your computer in MS-DOS mode (instead of opening a MS-DOS session from Windows).
  • Starting your computer from a floppy disk or leaving a floppy disk in the drive when you turn on or restart your computer.
  • Windows "blue screen" errors that ask you to "Press any key to continue".
  • Responding to ScanDisk and other messages during the start-up sequence.
  • Editing or upgrading the BIOS.
  • Entering a BIOS password.

    反正,我的结论就是这个值设置为Enable会导致USB外设工作不正常,设置为Disable后就可以安装Ghost版和番茄花园版的XP了~

阅读(2517) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~