- Specifies the default path grouping policy to apply to unspecified multipaths. Possible values include:
-
failover = 1 path per priority group
-
multibus = all valid paths in 1 priority group
-
group_by_serial = 1 priority group per detected serial number
-
group_by_prio = 1 priority group per path priority value
-
group_by_node_name = 1 priority group per target node name
-
The default value is failover.
hdsa
path_grouping_policy group_by_prio
hdsb
path_grouping_policy group_by_serial
hdsc
path_grouping_policy multibus
hdsd
path_grouping_policy group_by_node_name
hdse
path_grouping_policy failover
hdsa
[size=7.0T][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 1:0:0:0 sdb 8:16 [active][ready]
\_ round-robin 0 [prio=0][enabled]
\_ 2:0:0:0 sdc 8:32 [active][ready]
hdsb
[size=7.0T][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 1:0:0:1 sdd 8:48 [active][ready]
\_ 2:0:0:1 sde 8:64 [active][ready]
hdsc
[size=7.0T][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 1:0:0:2 sdf 8:80 [active][ready]
\_ 2:0:0:2 sdg 8:96 [active][ready]
hdsd
[size=7.0T][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 1:0:0:0 sdb 8:16 [active][ready]
\_ 2:0:0:0 sdc 8:32 [active][ready]
hdse
[size=7.0T][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 1:0:0:0 sdb 8:16 [active][ready]
\_ round-robin 0 [prio=0][enabled]
\_ 2:0:0:0 sdc 8:32 [active][ready]
阅读(6119) | 评论(0) | 转发(0) |