由于游戏业务需求,需要在DELL-2950服务器上安装debian系统,预料之外的是竟然debian系统不能识别板载网卡(Broadcom),郁闷,如何解决?
错误日志如下:
[ 2.871916] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5
[ 3.631838] firmware: requesting bnx2-06-4.0.5.fw
[ 105.599417] bnx2: Can't load firmware file bnx2-06-4.0.5.fw
[ 105.599563] bnx2: probe of 0000:03:00.0 failed with error -2
[ 106.791394] firmware: requesting bnx2-06-4.0.5.fw
[ 203.699607] bnx2: Can't load firmware file bnx2-06-4.0.5.fw
[ 203.699742] bnx2: probe of 0000:05:00.0 failed with error -2
放狗搜索后,发现解决办法大概有2种:
1,下载相对应的驱动到闪盘,进行挂载安装。
2,通过其他网卡进行apt安装。
分析如下:
当然是第二种方法简单,于是找来一块PCI-E网卡,先能上网再说。
两个步骤就搞定了,简单如下:
1,apt-get install firmware-bnx2
2,init 6
重新启动机器后,查看系统启动日志
debian:~# dmesg | grep bnx2
[ 1.909228] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5
[ 2.634060] firmware: requesting bnx2-06-4.0.5.fw
[ 3.185810] firmware: requesting bnx2-06-4.0.5.fw
[ 20.919411] bnx2: eth1: using MSI
[ 24.643177] bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[ 45.532163] bnx2: eth2: using MSI
如果没有出现原来的错误,就OK了,,再不放心,接上网线试试,呵呵
参考文献:
阅读(4846) | 评论(0) | 转发(0) |