1.Given a CD-ROM drive attached to the system's second SCSI bus and configured with a target address of four, construct the device file name following the default conventions.
Drag and drop question. Drag the items to the proper locations.
Correct Answers:
2.Order the steps required to perform a complete integrity check of a journaled file system.
Drag and drop question. Drag the items to the proper locations.
Correct Answers:
3.Which actions are performed by the set_parms command? Select THREE.
A:set the system date and time
B:configure the system to use DHCP
C:configure the system DNS setttings
D:set the root password
E:configures network time protocol (NTP)
Correct Answers: A, C, D
4.Which commands are used to list device file details? Select TWO.
A:lssf
B:lsdev
C:ioscan -fn
D:ll -d
E:lsf -a
Correct Answers: A, C
5.Port numbers are configured in which HP-UX file?
A: /etc/serviceports
B: /etc/hosts
C: /etc/services
D: /etc/inetd.conf
E: /etc/rc.config.d/services
Correct Answers: C
6.How do you set up a device swap area and ensure it is active at each system startup?
A: Start device swapping using the swapon command on an existing file system mount point.
B: Start device swapping using the swapon command on a logical volume; add an entry to the /etc/fstab file.
C: Start device swapping using the swapon command on a logical volume; add an entry to the /etc/sbtab file.
D: Start device swapping using the swapon command on a logical volume; add an entry to the /etc/vfstab file.
Correct Answers: B
7.Which statements are true for a LVM logical volume? Select TWO.
A:It is a file system.
B:It is not a file system.
C:It may contain a file system.
D:A logical volume contains one or more volume groups.
E:A logical volume contains one or more plexes.
Correct Answers: B, C
8.What is the default number of workspaces for CDE?
A: 2
B: 4
C: 8
D: 16
Correct Answers: B
9.Which file systems are mounted in single user mode by default?
A: NFS file systems
B: all local file systems
C: root file system
D: root and stand file systems
Correct Answers: D
10.What are standard ARPA services? Select THREE.
A:ftp
B:tcp
C:rcp
D:udp
E:telnet
F:rlogin
G:bootp
Correct Answers: A, E, G
