Chinaunix首页 | 论坛 | 博客
  • 博客访问: 3056539
  • 博文数量: 396
  • 博客积分: 0
  • 博客等级: 民兵
  • 技术积分: 4209
  • 用 户 组: 普通用户
  • 注册时间: 2016-07-04 13:04
文章分类

全部博文(396)

文章存档

2022年(1)

2021年(2)

2020年(8)

2019年(24)

2018年(135)

2017年(158)

2016年(68)

我的朋友

分类: 嵌入式

2017-11-22 10:07:23

在启用 ssh 服务时,有时会看到如下提示:
root@bt:~# /etc/init.d/ssh start
* Starting OpenBSD Secure Shell server sshd                                   
Could not load host key: /etc/ssh/ssh_host_rsa_key
Could not load host key: /etc/ssh/ssh_host_dsa_key


有两个提示 Could not load host key: /etc/ssh/ssh_host_rsa_key 和  Could not load host key: /etc/ssh/ssh_host_dsa_key ,此时如果从客户端连接到服务器时是不会成功的。其原因是在 SSH 连接协议中需要有 RSA 或 DSA 密钥的鉴权。 因此,我们可以在服务器端使用 ssh-keygen 程序来生成一对公钥/私钥对

运行下面命令:

root@bt:/etc/ssh# ssh-keygen -t rsa -b 2048 -f /etc/ssh/ssh_host_rsa_key
Generating public/private rsa key pair.
Enter passphrase (empty for no passphrase):            #直接回车即可
Enter same passphrase again: 
Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
The key fingerprint is:
3b:a4:b8:df:a9:15:d1:62:df:d5:d1:41:50:59:4a:96 root@bt
The key's randomart image is:
+--[ RSA 2048]----+
|             .***|
|         .   oE+o|
|        + .   o .|
|       . + . .   |
|        S . .    |
|     . o o       |
|    . . +        |
|     . o o       |
|    ..o.o        |
+-----------------+

上面 ssh-keygen 命令中,-t 选项表示生成的密钥所使用的加密类型,这里选择的是 RSA ;-b 选项表示 bit,后接一个整数,表示加密的位数,该数值越大表示加密的强度越高;-f 选项后接要生成的密钥文件名。根据 /etc/ssh 目录下的 sshd_config 配置文件,RSA 密钥默认识别文件名为 ssh_host_rsa_key 。

命令执行成功后,在 /etc/ssh 下会看到有两个文件生成:ssh_host_rsa_key 和 ssh_host_rsa_key.pub ,前者是私钥,后者是公钥。这样,当再次用 putty 连接时,首先会提示服务器端的加密指纹已经被修改,如果信任则点 yes 继续,否则断开,这里当然是选择信任 yes 。此后,客户端将用公钥对数据进行加密后发往服务器,而服务器收到数据后则用私钥进行解密。
阅读(34656) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~