分类：
2012-05-10 19:38:23
1,首先安装winpcpap 4.0再安装dynams
2,进入dynamips目录,把下载的7200.bin放到images目录里面
3,配置或者下载itaa01.net这样的配置文件放到dynamips安装目录下
4,运行dynamips-start.cmd启动服务
5,再运行itaa01.net即可启动啦
启动后有二个窗口一个Dynagen控制台,一个Dynamips Server
Dynagen控制台命令列表:
list 列出所有的仿真路由器
start /all 启动一个仿真器
stop /all 停止一个仿真器
------------------------------ itaa01.net 配置文件 --------------------------------
autostart = true
[localhost]
[[7200]]
idlepc = 0x6066ce58
#idlepc = 0x60968520
image = \PROGRA~1\Dynamips\images\c7200.bin
#image = \PROGRA~1\Dynamips\images\c7200-jk9o3s-nomz.124-8.bin
# On Linux / Unix use forward slashes:
# image = /opt/7200-images/c7200-jk9o3s-mz.124-7a.image
npe = npe-400
ram = 96
nvram = 512
confreg = 0x2142
[[ROUTER R1]]
console = 2001
slot0 = PA-C7200-IO-FE
slot1 = PA-4T
F0/0 = NIO_gen_eth:\Device\NPF_{23B9C4E0-001E-4342-9B97-FE5A347B9CCB}
s1/0 = R2 s1/0
s1/1 = R3 s1/1
[[ROUTER R2]]
console = 2002
slot1 = PA-4T
F0/0 = S1 2
s1/1 = R3 s1/0
[[ROUTER R3]]
console = 2003
slot1 = PA-4T
F0/0 = S1 3
[[ethsw S1]]
1 = dot1q 1
2 = dot1q 1
3 = dot1q 1
-----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------
常用FAQ:
1,让仿真器连接物理哦:
运行Network device list.cmd找到如下字样:
rpcap://\Device\NPF_{23B9C4E0-001E-4342-9B97-FE5A347B9CCB} : Network adapter
'Realtek RTL8139 Family Fast Ethernet Adapter' on local host
修改xxx.net文件把以太接口的参数改为物理网卡:
f0/0 = NIO_gen_eth:\Device\NPF_{23B9C4E0-001E-4342-9B97-FE5A347B9CCB}
测试:
config t
int f0/0
ip address 192.168.1.253 255.255.255.0
no shutdown
ping 192.168.1.1(通过)^_^
2,模拟三层机(加个NM-16ESW模块)
-----------------------------------------
三层交换机模拟试验:
# Simple lab
autostart = true
model = 3660
[localhost]
[[3660]]
image = "\Program Files\Dynamips\images\c3660-is-mz.124-8.bin"
exec_area = 8
idlepc = 0x604b85e0
ram = 128
#slot5 = NM-16ESW
[[ROUTER SW1]]
slot1 = NM-16ESW
fa1/0 = NIO_gen_eth:\Device\NPF_{23B9C4E0-001E-4342-9B97-FE5A347B9CCB}
fa1/1 = NIO_gen_eth:\Device\NPF_{23B9C4E0-001E-4342-9B97-FE5A347B9CCB}
fa1/2 = R1 fa0/0
fa1/3 = R2 fa0/0
[[router R1]]
#model = 3640
[[router R2]]
#model = 3640
-------------------------------------------------------------
启动好后先测试:
SW1:
int fa1/0
no switchport (设成三层端口模式，不存取vlan,如果要存取vlan的话就必须是二层端口)
ip add 192.168.1.253 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.1.104
ping 192.168.1.1
ping 外网ip都通
SW1:
int fa1/2
no switchport
ip address 172.16.1.1 255.255.255.0
no shutdown
R1:
int fa0/0
ip address 172.16.1.2 255.255.255.0
no shutdown
互ping是通的ok
清配置:
int fa1/2
no ip address
no ip route 0.0.0.0 0.0.0.0 192.168.1.104
------------------------------------------------------------------------
配置基于端口的vlan划分实验:
fa1/0 vlan11 192.168.1.253
fa1/2 vlan12 192.168.2.1
fa1/3 vlan13 192.168.3.1
代理服务器ip:192.168.1.104 (Linux Proxy)
---------------SW 1 --------------
hostname Center
vlan database #进入vlan数据配置模式
vlan 11 #添加11,12,13vlan
vlan 12
vlan 13
show vlan-switch #查看是否添加成功
config t
int fa1/0
switchport
switchport access vlan 11
switchport mode access
int fa1/2
switchport access vlan 12
switchport mode access
int fa1/3
switchport access vlan 13
switchport mode access
show vlan-switch
config t #配置vlan的ip地址
int vlan 11
ip address 192.168.1.253 255.255.255.0
no shutdown
int vlan 12
ip address 192.168.2.1 255.255.255.0
no shutdown
int vlan 13
ip address 192.168.3.1 255.255.255.0
no shutdown
show ip int brief #查看配置ip是否正确
show ip route #产生的默认网络路由
ip routing #允许ip路由
ip route 0.0.0.0 0.0.0.0 192.168.1.104 #默认全部的通讯走192.168.1.104代理服务器出去
测试在:vlan 11上面的pc11测试，ping 192.168.1.253,192.168.2.1,192.168.3.1是否畅通
tracert -d 外网服务器，跟踪路由看看是否经过192.168.1.253,192.168.1.104
---------------- R1 ----------------------------
hostname PC12
show ip int brief
config t
int f0/0
ip address 192.168.2.2 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.2.1
测试:ping 192.168.2.1通,192.168.1.116通,192.168.1.253通
------------------ R2 ---------------------------------
hostname pc13
show ip int brief
config t
int f0/0
ip address 192.168.3.2 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.3.1
测试:ping 192.168.3.1通,192.168.1.116通,192.168.1.253通,192.168.2.2通
------------- Linux Proxy 设置---------------------------------------------------
开启nat:
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
配置到vlan间网络的路由:
ip route add 192.168.2.0/24 via 192.168.1.253
ip route add 192.168.3.0/24 via 192.168.1.253
或者:
route add -net 192.168.2.0 netmask 255.255.255.0 gateway 192.168.1.253
route -n看看应该有:
192.168.1.0
192.168.2.0
192.168.3.0的路由表了
ping 192.168.2.2
192.168.3.2
都通过
PC12,PC13测试192.168.1.104都过哈:)
PC12,PC13测试外网，通过^_^ GameOver
