Chinaunix首页 | 论坛 | 博客
  • 博客访问: 612202
  • 博文数量: 113
  • 博客积分: 2554
  • 博客等级: 少校
  • 技术积分: 1428
  • 用 户 组: 普通用户
  • 注册时间: 2011-12-21 19:53
文章分类

全部博文(113)

文章存档

2014年(1)

2013年(2)

2012年(94)

2011年(16)

分类: LINUX

2012-04-16 18:40:33

[root@panhong wpa_supplicant]# wpa_cli --help
wpa_cli: invalid option -- '-'
wpa_cli [-p] [-i] [-hvB] [-a] \
        [-P] [-g] [-G]  [command..]
  -h = help (show this usage text)
  -v = shown version information
  -a = run in daemon mode executing the action file based on events from
       wpa_supplicant
  -B = run a daemon in the background
  default path: /var/run/wpa_supplicant
  default interface: first interface found in socket path
commands:
  status [verbose] = get current WPA/EAPOL/EAP status
  ping = pings wpa_supplicant
  mib = get MIB variables (dot1x, dot11)
  help = show this usage help
  interface [ifname] = show interfaces/select interface
  level = change debug level
  license = show full wpa_cli license
  quit = exit wpa_cli
  set = set variables (shows list of variables when run without arguments)
  logon = IEEE 802.1X EAPOL state machine logon
  logoff = IEEE 802.1X EAPOL state machine logoff
  pmksa = show PMKSA cache
  reassociate = force reassociation
  preauthenticate = force preauthentication
  identity = configure identity for an SSID
  password = configure password for an SSID
  new_password = change password for an SSID
  pin = configure pin for an SSID
  otp = configure one-time-password for an SSID
  passphrase = configure private key passphrase
    for an SSID
  bssid = set preferred BSSID for an SSID
  list_networks = list configured networks
  select_network = select a network (disable others)
  enable_network = enable a network
  disable_network = disable a network
  add_network = add a network
  remove_network = remove a network
  set_network = set network variables (shows
    list of variables when run without arguments)
  get_network = get network variables
  save_config = save the current configuration
  disconnect = disconnect and wait for reassociate/reconnect command before
    connecting
  reconnect = like reassociate, but only takes effect if already disconnected
  scan = request new BSS scan
  scan_results = get latest scan results
  bss < | > = get detailed scan result info
  get_capability = get capabilies
  reconfigure = force wpa_supplicant to re-read its configuration file
  terminate = terminate wpa_supplicant
  interface_add
    = adds new interface, all parameters but
    are optional
  interface_remove = removes the interface
  interface_list = list available interfaces
  ap_scan = set ap_scan parameter
  stkstart = request STK negotiation with
  ft_ds = request over-the-DS FT with
  wps_pbc [BSSID] = start Wi-Fi Protected Setup: Push Button Configuration
  wps_pin [PIN] = start WPS PIN method (returns PIN, if not hardcoded)
  wps_reg = start WPS Registrar to configure an AP
  wps_er_start = start Wi-Fi Protected Setup External Registrar
  wps_er_stop = stop Wi-Fi Protected Setup External Registrar
  wps_er_pin = add an Enrollee PIN to External Registrar
  wps_er_pbc = accept an Enrollee PBC using External Registrar
  wps_er_learn = learn AP configuration
  ibss_rsn = request RSN authentication with in IBSS
  suspend = notification of suspend/hibernate
  resume = notification of resume/thaw
  drop_sa = drop SA without deauth/disassoc (test command)
  roam = roam to the specified BSS

阅读(3582) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~