|
前两天在安装Ubuntu的时候，把文件系统选择成了XFS文件系统，结果在安装GRUB的时候提示：GRUB在XFS文件系统上通常都会安装失败，试了一下，果然无法安装，最后只好选用LILO来引导。
可是系统重启后，之前安装的Debian没有在启动项中，我在/etc/lilo.conf中添加了几项之后，竟然影响到的新立德软件包管理工具人使用，错误提示如下所示：
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
我运行了dpkg --configure -a之后，出现如下的错误：
正在设置 initramfs-tools (0.85eubuntu36) ...
update-initramfs: deferring update (trigger activated)
正在设置 linux-ubuntu-modules-2.6.24-17-generic (2.6.24-17.25) ...
update-initramfs: Generating /boot/initrd.img-2.6.24-17-generic
update-initramfs: lilo run failed for /boot/initrd.img-2.6.24-17-generic:
Warning: LBA32 addressing assumed
Unrecognized token "8.04" at or above line 108 in file '/etc/lilo.conf'
dpkg：处理 linux-ubuntu-modules-2.6.24-17-generic (--configure)时出错：
子进程 post-installation script 返回了错误号 1
dpkg：依赖关系问题使得 linux-image-generic 的配置工作不能继续：
linux-image-generic 依赖于 linux-ubuntu-modules-2.6.24-17-generic；然而：
软件包 linux-ubuntu-modules-2.6.24-17-generic 还没有被配置。
dpkg：处理 linux-image-generic (--configure)时出错：
依赖关系问题 - 仍未被配置
dpkg：依赖关系问题使得 linux-generic 的配置工作不能继续：
linux-generic 依赖于 linux-image-generic (= 2.6.24.17.19)；然而：
软件包 linux-image-generic 还没有被配置。
dpkg：处理 linux-generic (--configure)时出错：
依赖关系问题 - 仍未被配置
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.24-17-generic
update-initramfs: lilo run failed for /boot/initrd.img-2.6.24-17-generic:
Warning: LBA32 addressing assumed
Unrecognized token "8.04" at or above line 108 in file '/etc/lilo.conf'
dpkg: 子进程 post-installation script 返回了错误号 1
看来是lilo的配置文件中出了问题，我修改了一下/etc/lilo.conf文件，运行了一下lilo出现如下的提示:
Warning: LBA32 addressing assumed
Added Ubuntu_8.04 *
Added Ubuntu_single
Added Debian_4.0
Added Debian_single
Added Windows
One warning was issued.
再运行上面的sudo dpkg --configure -a，这下正常了，运行过程如下所示：
正在设置 initramfs-tools (0.85eubuntu36) ...
update-initramfs: deferring update (trigger activated)
正在设置 linux-ubuntu-modules-2.6.24-17-generic (2.6.24-17.25) ...
update-initramfs: Generating /boot/initrd.img-2.6.24-17-generic
Warning: LBA32 addressing assumed
Added Ubuntu_8.04 *
Added Ubuntu_single
Added Debian_4.0
Added Debian_single
Added Windows
One warning was issued.
正在设置 linux-image-generic (2.6.24.17.19) ...
正在设置 linux-generic (2.6.24.17.19) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.24-17-generic
Warning: LBA32 addressing assumed
Added Ubuntu_8.04 *
Added Ubuntu_single
Added Debian_4.0
Added Debian_single
Added Windows
One warning was issued.
下面附上我的/etc/lilo.conf配置文件：
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --------------- `install-mbr(8)', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.
# +---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt' (if you have created it), or |
# | install a new kernel. The computer will most likely fail to |
# | boot if a kernel-image post-install script or you don't |
# | remember to run `lilo'. |
# | |
# +---------------------------------------------------------------+
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/sda
# Specifies the device that should be mounted as root. (`/')
#
#root=/dev/sda8
# This option may be needed for some software RAID installs.
#
# raid-extra-boot=mbr-only
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller. Using `compact' is especially recommended when
# booting from a floppy disk. It is disabled here by default
# because it doesn't always work.
#
# compact
# Installs the specified file as the new boot sector
# You have the choice between: text, bmp, and menu
# Look in lilo.conf(5) manpage for details
#
#install=menu
# Specifies the location of the map file
#
map=/boot/map
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration. If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well. Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=50
# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
# prompt
# delay=100
# timeout=100
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
# vga=ask
# vga=9
#
# Kernel command line options that apply to all installed images go
# here. See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""
# If you used a serial console to install Ubuntu, this option should be
# enabled by default.
# serial=
#
# Boot up Linux by default.
#
default=Ubuntu_8.04
image=/vmlinuz
label="Ubuntu 8.04"
read-only
# restricted
# alias=1
append="root=/dev/sda8 "
initrd=/initrd.img
image=/vmlinuz
label="Ubuntu single"
read-only
# restricted
# alias=2
append="root=/dev/sda8 single"
initrd=/initrd.img
# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
image=/vmlinuz
label="Debian 4.0"
# restricted
# alias=3
append="root=/dev/sda5 "
initrd=/initrd.img
image=/vmlinuz
label="Debian single"
# restricted
# alias=4
append="root=/dev/sda5 single"
initrd=/initrd.img
other=/dev/sda1
label=Windows
# restricted
# alias=5
|
