rtorrent 文本方式的bt下载工具 - 嵌入式+linux

rtorrent是一个字符界面的bt客户端，安装简便，而且速度也不错。

在ubuntu下使用下面的命令安装：
sudo apt-get install rtorrent

安装完成后我们需要作一些配置工作，配置文件是安装用户家目录下的.rtorrent.rc。这个文件默认是没有的，请到http: //libtorrent.rakshasa.no/browser/trunk/rtorrent/doc/rtorrent.rc?rev=latest 页面,将示例的配置文件内容拷贝粘贴到.rtorrent.rc中,然后我们来编辑它。
我将如下项的注释去掉，并按照自己的情况进行修改。

# Default directory to save the downloaded torrents.
directory =/home/lynn/bt
directory指定了下载文件的存放目录。

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session =/home/lynn/bt/session
session指定session的存放目录，有了它就能进行恢复下载。不然每次重启都要手动添加。

# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = watch_directory,5,5,load_start=/home/lynn/bt/watch/*.torrent
schedule = untied_directory,5,5,stop_untied=
这两项启动了rtorrent的监视功能，将种子文件放入load_start指定的目录中后，rtorrent将自动开始下载。

我的locale是zh_CN.UTF-8的因此我在配置文件中添加了下面一行，这样生成的目录和文件名就不是乱码了。
encoding_list=UTF-8

具体的操作请看man。

cat .rtorrent.rc 我的样本
        # This is an example resource file for rTorrent. Copy to
        # ~/.rtorrent.rc and enable/modify the options as needed. Remember to
        # uncomment the options you wish to enable.

        # Maximum and minimum number of peers to connect to per torrent.
        #min_peers = 40
        #max_peers = 100

        # Same as above but for seeding completed torrents (-1 = same as downloading)
        #min_peers_seed = 10
        #max_peers_seed = 50

        # Maximum number of simultanious uploads per torrent.
        #max_uploads = 15

        # Global upload and download rate in KiB. "0" for unlimited.
        download_rate = 1000
        upload_rate = 10

        # Default directory to save the downloaded torrents.
        directory = /home/huying/bt

        # Default session directory. Make sure you don't run multiple instance
        # of rtorrent using the same session directory. Perhaps using a
        # relative path?
        session = /home/huying/bt/session

        # Watch a directory for new torrents, and stop those that have been
        # deleted.
        schedule = watch_directory,5,5,load_start=./watch/*.torrent
        schedule = untied_directory,5,5,stop_untied=

        # Close torrents when diskspace is low.
        #schedule = low_diskspace,5,60,close_low_diskspace=100M

        # Stop torrents when reaching upload ratio in percent,
        # when also reaching total upload in bytes, or when
        # reaching final upload ratio in percent.
        # example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
        #schedule = ratio,60,60,stop_on_ratio=200,200M,2000

        # The ip address reported to the tracker.
        #ip = 127.0.0.1
        #ip = rakshasa.no

        # The ip address the listening socket and outgoing connections is
        # bound to.
        #bind = 127.0.0.1
        #bind = rakshasa.no

        # Port range to use for listening.
        #port_range = 6890-6999

        # Start opening ports at a random position within the port range.
        #port_random = no

        # Check hash for finished torrents. Might be usefull until the bug is
        # fixed that causes lack of diskspace not to be properly reported.
        #check_hash = no

        # Set whetever the client should try to connect to UDP trackers.
        #use_udp_trackers = yes

        # Alternative calls to bind and ip that should handle dynamic ip's.
        #schedule = ip_tick,0,1800,ip=rakshasa
        #schedule = bind_tick,0,1800,bind=rakshasa

        # Encryption options, set to none (default) or any combination of the following:
        # allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
        #
        # The example value allows incoming encrypted connections, starts unencrypted
        # outgoing connections but retries with encryption if they fail, preferring
        # plaintext to RC4 encryption after the encrypted handshake
        #
        # encryption = allow_incoming,enable_retry,prefer_plaintext

        #
        # Do not modify the following parameters unless you know what you're doing.
        #

        # Hash read-ahead controls how many MB to request the kernel to read
        # ahead. If the value is too low the disk may not be fully utilized,
        # while if too high the kernel might not be able to keep the read
        # pages in memory thus end up trashing.
        #hash_read_ahead = 10

        # Interval between attempts to check the hash, in milliseconds.
        #hash_interval = 100

        # Number of attempts to check the hash while using the mincore status,
        # before forcing. Overworked systems might need lower values to get a
        # decent hash checking rate.
        #hash_max_tries = 10

        # Max number of files to keep open simultaniously.
        #max_open_files = 128

        # Number of sockets to simultaneously keep open.
        #max_open_sockets = <no default>

        # Example of scheduling commands: Switch between two ip's every 5
        # seconds.
        #schedule = "ip_tick1,5,10,ip=torretta"
        #schedule = "ip_tick2,10,10,ip=lampedusa"

        # Remove a scheduled event.
        #schedule_remove = "ip_tick1"
        encoding_list=UTF-8