我一直在用kermit，每次使用时，都要将命令复制过来一遍，麻烦！今天在研究U－Boot时，看了U－Boot的官方Manual，里面讲到了4.3. Configuring the "kermit" command。我才知道kermit在启动时会查找~/.kermrc文件，调用里面的命令来初始化kermit。只要将你所需的命令写到~/.kermrc文件里，启动后就不这么麻烦了。
# vi ~/.kermrc
set line /dev/ttyS0 set speed 115200 set carrier-watch off set handshake none set flow-control none robust set file type bin set file name lit set rec pack 1000 set send pack 1000 set window 5 c
保存后退出即可。然后启动kermit，你会看到： # kermit Connecting to /dev/ttyS0, speed 115200 Escape character: Ctrl-\ (ASCII 28, FS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. ----------------------------------------------------
