|
1. 准备工作 安装服务器、配置服务器、文件服务器使用同一台服务器（我这里是Netra20） Client Server（SUN Fire V480） 一张Solaris10 OS DVD安装盘 2．说明提供以下步骤 （1）创建一个JumpStart安装服务器 （2）在服务器上创建一个安装目录以及客户配置文件 （3）共享安装、配置文件 （4）创建客户tftpboot文件 （5）为了允许从网络启动，Pre-boot Execution Enviroment（PXE）必须生效 3．开始工作Put the Solaris 10 OS for Sparc platforms DVD in the DVD-ROM on the server 1．创建一个安装目录 # mkdir /export/home/install 2．将Solaris software拷贝到新建的目录中 # cd /cdrom/cdrom0/s0/Solaris_10/Tools # ./setup_install_server /export/home/install Verifying target directory…. Calculating the required disk space for the Solaris_10 product Calculating space required for the installation boot image Copying the CD image to disk... Copying Install Boot Image hierarchy... 3．创建一个配置目录 # mkdir /export/home/config 在/export/home/config下创建一个sysidcfg文件 # cd /export/home/config # touch sysidcfg # vi sysidcfg system_local=en_US.ISO8859-1 timezone=Asia/Shanghai terminal=vt100 root_password=<encrypted from /etc/shadow> network_interface=primary {hostname=V480 network=255.255.255.0 protocol_ipv6=no default_route=192.168.1.1} :wq 创建一个profile文件Tech_prof（这里是在技术部） # touch Tech_prof # vi Tech_prof install_type initial_install system_type standalone partitioning explicit cluster SUNWCprog filesys rootdisk.s0 8192 / filesys rootdisk.s1 1024 swap filesys rootdisk.s4 2000 /opt filesys rootdisk.s7 free /export/home :wq 创建一个rules文件 # touch rules # vi rules hostname V480 – Tech_prof – :wq 创建check脚本 # cd /export/home/config # cp /export/home/install/Solaris_10/Misc/jumpstart_sample/check . 运行check脚本 # ./check Validating rules… Validating profile Tech_prof The custom JumpStart configuration is ok. 4．共享/export/home/install和/export/home/config 目录 （1）# share –F nfs –o ro,anon=0 /export/home/install # share –F nfs –o ro,anon=0 /export/home/config # shareall (2)编辑/etc/dfs/dfstab文件 # vi /etc/dfs/dfstab # Place share( # on entering init state 3. # # Issue the command 'svcadm enable network/nfs/server' to # run the NFS daemon processes and the share commands, after adding # the very first entry to this file. # # share [-F fstype] [ -o options] [-d "<text>"] <pathname> [resource] # .e.g, # share -F nfs -o rw=engineering -d "home dirs" /export/home2 share -F nfs -o ro,anon=0 /export/home/install share -F nfs -o ro,anon=0 /export/home/config "dfstab" 16 lines, 580 characters :wq 5．启动nfsserver # /etc/init.d/nfs.server start 6．编辑/etc/hosts # # Internet host table # 127.0.0.1 localhost 192.168.1.20 Netra20 loghost 192.168.1.48 V480 :wq 7．创建tftpboot文件 运行add_install_client 脚本为客户 找到add_install_client 脚本的位置 # cd /export/home/install/Solaris_10/Tools # ./add_install_client \ >-e 0:3:ba: >-s Netra20:/export/home/install \ >-c Netra20:/export/home/config \ >-p Netra20:/export/home/sysidcfg Enabling tftp in /etc/inetd.confi Converting /etc/inetd.conf 生成文件在/etc/bootparams验证： # more /etc/bootparams V480 root=Netra20:/database/install/Solaris_10/Tools/Boot install=Netra20:/data base/install boottype=:in sysid_config=Netra20:/database/jumpstart/sysidcfg inst all_config=Netra20:/database/jumpstart rootopts=:rsize=8192 8．配置就绪，客户机可以通过网络安装了 在ok提示下输入 ok boot net – install Netra20:/export/home/install 这里注意：确保网线安装好 |
JumpStart Install Solaris 10 Over a Local Network
 |
给我留言 | |