!/bin/sh

/sbin/modprobe ip_conntrack_ftp
CONNECTION_TRACKING="1"
ACCEPT_AUTH="0"
SSH_SERVER="0"
FTP_SERVER="0"
WEB_SERVER="0"
SSL_SERVER="0"
DHCP_SERVER="1"

IPT="sbin/iptables"   # Location of iptables on your system
INTERNET="eth0"    # Internet-connected interface
LOOPBACK_INTERFACE="lo"   # However your system names it
IPADDR="my.ip.address"   # Your IP address
SUBNET_BASE="my.subnet.bcast"  # ISP network segment base address
SUBNET_BROADCAST="my.subnet.bcast" # network segment broadcast address
MY_ISP="my.isp.address.range"  # ISP server & NOC address range

NAMESERVER="isp.name.server.1"  # address of a remote name server
POP_SERVER="isp.pop.server"  # address of a remote pop server
MAIL_SERVER="isp.mail.server"  # address of a remote mail gateway
NEWS_SERVER="isp.news.server"  # address of a remote news server
TIME_SERVER="some.time.server"  # address of a remote time server
DHCP_SERVER="isp.dhcp.server"  # address of your ISP dhcp server

LOOPBACK="127.0.0.0/8"   # reserved loopback address range
CLASS_A="10.0.0.0/8"   # Class A private network
CLASS_B="172.0.0.0/12"   # Class B private network
CLASS_C="192.168.0.0/16"  # Class C private network
CLASS_D_MULTICAST="224.0.0.0/4"  # Class D multicast address
CLASS_E_RESERVED_NET="240.0.0.0/5" # Class E reserved address
BROADCAST_SRC="0.0.0.0"   # broadcast source address
BROADCAST_DEST="255.255.255.255" # broadcast destination address

PRIVPORTS="0:1023"   # well-know,privileged port range
UNPRIVPORTS="1024:65535"  # unprivileged port range

SSH_PORTS="1024:65535"

NFS_PORT="2049"
LOCKD_poRT="4045"
SOCKS_PORT="1080"
OPENWINDOWS_PORT="2000"
XWINDOWS_PORTS="6000:6063"
SQUID_PORT="3128"

#####################################################################################

# Enable broadcast echo Protection
echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts

# Disable Source Routed Packets
for f in /proc/sys/net/ipv4/conf/*/accept_source_routed;do
 echo 0 > $f
done

# Enable TCP SYN Cookie Protection
echo 1 > /proc/sys/net/ipv4/tcp_syncookies

# Disable ICMP Redirect Acceptance
for f in /proc/sys/net/ipv4/conf/*/accept_redirects;do
 echo 0 > $f
done

# Don't send Redirect Messages
for f in /proc/sys/net/ipv4/conf/*/send_redirects;do
 echo 0 > $f
done

# Drop spoofed Packets coming in on interface,with,if replied to,
# would result in the reply going out a different interface.
for f in /proc/sys/net/ipv4/conf/*/rp_filter;do
 echo 1 > $f
done

# Log packets with impossible address.
for f in /proc/sys/net/ipv4/conf/*/log_martians;do
 echo 1 > $f
done

#######################################################################################

# Remove any existing rules from all chains
$IPT --flush
$IPT -t nat --flush
$IPT -t mangle --flush
$IPT -X
$IPT -t nat -X
$IPT -t mangle -X
$IPT --policy INPUT ACCEPT
$IPT --policy OUTPUT ACCEPT
$IPT --policy FORWARD ACCEPT
$IPT -t nat --policy PREROUTING ACCEPT
$IPT -t nat --policy OUTPUT ACCEPT
$IPT -t nat --policy POSTROUTING ACCEPT
$IPT -t mangle --policy PREROUTING ACCEPT
$IPT -t mangle --policy OUTPUT ACCEPT
if [ "$1" = "stop" ]
then
echo "Firewall completely stopped! WARNING: THIS HOST HAS NO FIREWALL RUNNING."
exit 0
fi
#Unlimited traffic on the loopback interface
$IPT -A INPUT -i lo -j ACCEPT
$IPT -A OUTPUT -o lo -j ACCEPT

$ Set the default policy to drop
$IPT --policy INPUT DROP
$IPT --policy OUTPUT DROP
$IPT --policy FORWARD DROP

$IPT -t nat --policy PREROUTING DROP
$IPT -t nat --policy OUTPUT DROP
$IPT -t nat --policy POSTROUTING DROP

$IPT -t mangle --policy PREROUTING DROP
$IPT -t mangle --policy OUTPUT DROP

#########################################################################################

# Stealth Scans and TCP state Flags

# Unclean
$IPT -A INPUT -m unclean -j DROP

# ALL of the bits are cleared
$IPT -A INPUT -p tcp --tcp-flags ALL NONE -j DROP

# SYN and FIN are both set
$IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP

# SYN and RST are both set
$IPT -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j DROP

# FIN and RST are both set
$IPT -A INPUT -p tcp --tcp-flags FIN,RST FIN,RST -j DROP

# FIN is the only bit set,without the expected accompanying ACK
$IPT -A INPUT -p tcp --tcp-flags ACK,PSH PSH -j DROP

# PSH is the only bit set,without the expected accompanying ACK
$IPT -A INPUT -p tcp --tcp-flags ACK,PSH PSH -j DROP

# URG is the only bit set,without the expected accompanying ACK
$IPT -A INPUT -p tcp --tcl-flags ACK,URG URG -j DROP

##########################################################################################
#Using Connection State to By-pass Rule Checking