Sun StorageTek 6140 初始IP和密码配置方法：
1) 用6140配置的串口线+Cisco 9针转街头去连接"A"控制器串口至PC机的串口上。
2) PC机上的超级终端程序打开，波特率使用默认配置，(9600 8 0 1 0)。
3) ^+Break 后即出现以下提示：
Press within 5 seconds: <S> for Service Interface, <BREAK> for baud rate---- "S"
\\*此处按下“S”即可进入对接口的配置，如果按下Break则是对波特率的同步。
Current date: 08/17/07 time: 06:07:25
Enter Password to access Service Interface (60 sec timeout): ----"kra16wen"
\\*初始密码"kra16wen"
->
\\*以下是对6140控制器的管理IP的配置
Press within 5 seconds: <S> for Service Interface, <BREAK> for baud rate
Current date: 08/17/07 time: 06:23:33
Enter Password to access Service Interface (60 sec timeout):
->
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 1
Ethernet Port Configuration
==============================
Device Name : esmc0
IP Address : 210.10.1.30
Subnet Mask : 255.255.255.0
Gateway IP Address : 210.10.1.1
IP acquired using : STATIC
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 2
Ethernet Port Configuration
==============================
Device Name : esmc1
IP Address : 192.168.129.101
Subnet Mask : 255.255.255.0
Gateway IP Address : 210.10.1.1
IP acquired using : Default
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 2
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 2
Configure using DHCP ? (Y/N): N
Press '.' to clear the field;
Press '-' to return to the previous field;
Press <ENTER> and then ^D to quit (Keep Changes)
Current Configuration New Configuration
IP Address if1 : 192.168.129.101
Subnet Mask if1 : 255.255.255.0
Gateway IP Address if1 : 210.10.1.1 192.168.129.0 1
The IP Configuration is getting changed to:
IP Address : 192.168.129.101
Subnet Mask : 255.255.255.0
Gateway IP Address : 192.168.129.1
Are you sure that you want to change IP Configuration ? (Y/N): Y
Network Configuration successfully changed.
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 2
Ethernet Port Configuration
==============================
Device Name : esmc1
IP Address : 192.168.129.101
Subnet Mask : 255.255.255.0
Gateway IP Address : 192.168.129.1
IP acquired using : STATIC
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 1
Ethernet Port Configuration
==============================
Device Name : esmc0
IP Address : 210.10.1.30
Subnet Mask : 255.255.255.0
Gateway IP Address : 192.168.129.1
IP acquired using : STATIC
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 2
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 1
Configure using DHCP ? (Y/N): N
Press '.' to clear the field;
Press '-' to return to the previous field;
Press <ENTER> and then ^D to quit (Keep Changes)
Current Configuration New Configuration
IP Address if0 : 210.10.1.30 210.10.1.30
Subnet Mask if0 : 255.255.255.0 255.255.255.0
Gateway IP Address if0 : 192.168.129.1 210.10.1.1
The IP Configuration is getting changed to:
IP Address : 210.10.1.30
Subnet Mask : 255.255.255.0
Gateway IP Address : 210.10.1.1
Are you sure that you want to change IP Configuration ? (Y/N): Y
Network Configuration successfully changed.
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 1
Ethernet Port Configuration
==============================
Device Name : esmc0
IP Address : 210.10.1.30
Subnet Mask : 255.255.255.0
Gateway IP Address : 210.10.1.1
IP acquired using : STATIC
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
Select Ethernet Port
==============================
1) Ethernet Port: 1
2) Ethernet Port: 2
Q) Quit
Enter Selection: 2
Ethernet Port Configuration
==============================
Device Name : esmc1
IP Address : 192.168.129.101
Subnet Mask : 255.255.255.0
Gateway IP Address : 210.10.1.1
IP acquired using : STATIC
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: Q
Send <BREAK> for Service Interface or baud rate change
