如何在Solaris上配置带库(NetBackup 6.0)

1．检查操作系统是否正确认出带库，正确状态如下；如果没有认出，可以使用cfgadm -c configure 和cfgadm -c unconfigure 进行刷新；如果仍然不能认出，需要检查物理设备状态。

-bash-3.00# cfgadm –al

c3::sg/c1t6l0                                    unknown                       connected    configured   unknown

c3::sg/c1t6l1                                    unknown                       connected    configured   unknown

c4                                                        fc                                     connected    unconfigured unknown

c5                                                        fc-fabric                        connected    configured   unknown

c5::100000093c003451           med-changer                 connected    configured   unknown

usb0/1                                               unknown                       empty            unconfigured ok

2．安装驱动

cd /usr/openv/volmgr/bin/driver

                    /usr/openv/volmgr/bin/sg.build all -mt 15 -ml 10

                    rm -f /kernel/drv/sg.conf

                    /usr/openv/volmgr/bin/driver/sg.install

3．验证磁带库安装情况

                    ls /dev/sg/        应该有如下输出 ：

-bash-3.00# ls /dev/sg

c0t0l0                  c0t3l0                  c0t6l0                  c1t1l0                  c1t4l0

c0t0l1                  c0t3l1                  c0t6l1                  c1t1l1                  c1t4l1

c0t1l0                  c0t4l0                  c0tw100000093c003451 l0  c1t2l0                  c1t5l0

c0t1l1                  c0t4l1                  c0tw100000093c003451 l1  c1t2l1                  c1t5l1

c0t2l0                  c0t5l0                  c1t0l0                  c1t3l0                  c1t6l0

c0t2l1                  c0t5l1                  c1t0l1                  c1t3l1                  c1t6l1

                    /usr/openv/volmgr/bin/scan    可以扫描到机械手和磁带机